
Esp32miniBT
asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)

Documentation of the automatic router lift for the ultimate workbench - Munich Maker Lab
Router Lift Prototype1 is an open-source printed circuit board by jfdzar, from the jfdzar/router_lift repository on GitHub. It is a 2-layer board of 143 × 93 mm with 37 parts on 52 nets, routed with 346 tracks and 30 vias.
It is built around the ESP32-WROOM-32. Its parts include 11 resistors, 11 connectors, 3 ICs, 2 diodes and 2 transistors. It belongs with the ESP32 boards of this library.
Documentation of the automatic router lift for the ultimate workbench - Munich Maker Lab
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11 |
| 7 | Conn_01x02 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J1, J2, J6, J7, J8, J9, J10 |
| 3 | Conn_01x06 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-6_1x06_P2.54mm_Horizontal | J3, J4, J5 |
| 2 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 1 | BOOST-DRV8711 | Module:TI_BOOST_DRV8711 | U3 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | Conn_01x04 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-4_1x04_P2.54mm_Horizontal | J11 |
| 1 | ESP32-WROOM | ESP32-DevKits:ESP32-WROOM | U2 |
| 1 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | SH1106_Display_Module | Display:SH1106_Makershop | U1 |
The 33 most common of 37 parts.

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.




likeablob/slow-movie-player-7c
Yet another "Slow Movie Player" implementation with 7-color E-Paper module and ESP32.

JSnowden33/Wii-Bluetooth-Replacement
This project is a full replacement for the Nintendo Wii's Bluetooth module. Emulation of the Bluetooth module is performed on the PIC32 based on rnconrad's emulator, while controller connectivity on the ESP32 is based…
It measures 143 × 93 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the ESP32-WROOM-32. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jfdzar/router_lift repository on GitHub, at the commit this page was made from: the board is kicad/Router_Lift_Prototype1/Router_Lift_Prototype1.kicad_pcb and its schematic kicad/Router_Lift_Prototype1/Router_Lift_Prototype1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jfdzar before reusing the design.