
DigitalLogicProject
Jetsama/DigitalLogicProject
Physical representation of digital logic gates using PCBs

Physical representation of digital logic gates using PCBs
NOTGATE is an open-source printed circuit board by Jetsama, from the Jetsama/DigitalLogicProject repository on GitHub. It is a 2-layer board of 29 × 14 mm with 11 parts on 9 nets, routed with 54 tracks and 2 vias.
It is built around the SN74LVC1GU04DBV and LTST-S220GKT. Its parts include 4 connectors, 3 diodes, 2 resistors and 1 IC.
The Digital Logic Tool is used to help students visualize and use digital logic gates. Each logic gate becomes a physical object for the student to interconnect an experiement with.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 2 | LTST-S220GKT | DigitalLogicFootprints:LED_LTST-S220GKT_LTO | LED1, LED3 |
| 2 | ~ | DigitalLogicFootprints:8mm-snap | J4, J5 |
| 1 | Conn_01x01_Socket | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | LOGO | DigitalLogicFootprints:HBBLogo | G*** |
| 1 | MB10F-13 | DigitalLogicFootprints:DIOB_MB10F-13 | D1 |
| 1 | SN74LVC1GU04 | DigitalLogicFootprints:DBV5 | U1 |

Jetsama/DigitalLogicProject
Physical representation of digital logic gates using PCBs

Jetsama/DigitalLogicProject
Physical representation of digital logic gates using PCBs


Jetsama/DigitalLogicProject
Physical representation of digital logic gates using PCBs


mungewell/pico-timecode
A budget friendly LTC/TimeCode device built from a RaspberryPi Pico - using the PIO blocks and MicroPython

NuZondar/NU180
A reverse-engineered replacement for the U180 hybrid in the HPAK 3458A DVM.

Batperson/video_timing_board
Development board to extract timing and subcarrier signals from a PAL or NTSC video source.


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 29 × 14 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the SN74LVC1GU04DBV and LTST-S220GKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jetsama/DigitalLogicProject repository on GitHub, at the commit this page was made from: the board is Gates/NOTGATE/NOTGATE.kicad_pcb and its schematic Gates/NOTGATE/NOTGATE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Jetsama before reusing the design.