2 layers42 × 67 mm
2 layers
Jack32v6
jeromeOlivier/Jack34- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 60
- Pads
- 319
- Tracks, vias
- 168, 15
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 30 Aug 2023
- Updated
- 29 May 2024
Overview
Jack32v6 is an open-source printed circuit board by jeromeOlivier, from the jeromeOlivier/Jack34 repository on GitHub. It is a 2-layer board with 65 parts on 60 nets, routed with 168 tracks and 15 vias.
Its parts include 32 diodes, 32 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +16 |
| 32 | MX_SW_HS | ScottoKeebs_Hotswap:Hotswap_Choc_V1_1.00u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24 +16 |
| 1 | eliteC | Keebio-Parts.pretty-master:my_microcontroller | U1 |
Similar boards
- 2 layers198.1 × 30.5 mm
Splitflap driver
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
65 parts744MIT - 2 layers74.8 × 32.5 mm
- 2 layers60 × 100 mm
V3 Connector Only
PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)
65 parts439GPL-2.0 - 2 layers45 × 58.2 mm
- 2 layers27.9 × 101.6 mm
- 2 layers40 × 120 mm
Photodiode board v3
0x23/nmWave-Interferometer
An Open Source Interferometer for Accurate Distance Measurements
65 parts151MIT - 2 layers78 × 130 mm
Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT
Questions
What parts does the Jack32v6 use?
65 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jack32v6 KiCad files?
From the jeromeOlivier/Jack34 repository on GitHub, at the commit this page was made from: the board is Jack32v6.kicad_pcb and its schematic Jack32v6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jack32v6 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jeromeOlivier before reusing the design.