
Penfold ADSR
ali5ter/Penfold_ADSR
🎛️ R.A. Penfold's ADSR design adapted as a Eurorack powered module

Continuity Tester is an open-source printed circuit board by jeremypoulter, from the jeremypoulter/RADARC_PCB_Course repository on GitHub. It is a 2-layer board of 47.5 × 43 mm with 19 parts on 12 nets, routed with 94 tracks and 0 vias.
It is built around the CA3240E and IN4148W. Its parts include 9 resistors, 2 diodes, 1 capacitor, 1 IC and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100K | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | MountingHole | MountingHole:MountingHole_3mm | MH1, MH2 |
| 1 | 150K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 15n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 270 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 47 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 4K7 | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 6K8 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Battery | Connector_PinSocket_2.54mm:PinSocket_2x01_P2.54mm_Vertical | BT1 |
| 1 | CA3240 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | IN4148 | Diode_THT:D_A-405_P7.62mm_Horizontal | D2 |
| 1 | KU57M | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | LS1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPDT_CK-JS102011SAQN | SW1 |
| 1 | Test Probes | Connector:Banana_Jack_2Pin | J1 |

ali5ter/Penfold_ADSR
🎛️ R.A. Penfold's ADSR design adapted as a Eurorack powered module

TheNoobInventor/pi-pico-drone
A micro drone is made using the Raspberry Pi Pico W. It is fitted with the MPU6050 IMU module and BMP280 barometric sensor. The drone will be controlled using TinyMPC and employ a Micro-ROS client on FreeRTOS.

fablabnk/HagiwoClockMultiDivide
This is an attempt to make a PCB version of Hagiwo's Clock Multi Divide module.



sabiinsearch/IoT
Projects related to Internet of Things (IoT)


AndreHatu/MarioKart
Senior Design Project using ESP32s to remake Mario Kart with RC Cars
It measures 47.5 × 43 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the CA3240E and IN4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jeremypoulter/RADARC_PCB_Course repository on GitHub, at the commit this page was made from: the board is Continuity Tester.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jeremypoulter before reusing the design.