Skip to the content
2 layers100 × 100 mmInput Board, the printed circuit board in 3D

Input Board

jensenr30/cad1

Schematics, PCBs, Simulations, ...

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
95
Nets
50
Pads
228
Tracks, vias
679, 41
Routed
Yes
KiCad
KiCad 4
Created
4 May 2019
Updated
11 Oct 2025

Overview

Input Board is an open-source printed circuit board by jensenr30, from the jensenr30/cad repository on GitHub. It is a 2-layer board of 100 × 100 mm with 95 parts on 50 nets, routed with 679 tracks and 41 vias.

It is built around the TL084, 74HC14 and 78L05, with the BC847CW among its other parts. Its parts include 34 resistors, 23 capacitors, 14 connectors, 9 transistors and 5 ICs.

Main components

4

README

README.md

Ryan's CAD Files (Schematics, PCBs, Simulations)

kicad5

I started using KiCad 5.1.2 to draw schematics and lay out PCBs in May 2019.

kicad4

I used KiCad 4.0.6 for 3 weeks in September 2017. The two projects I completed are:

eagle6

Eagle was the first CAD program I ever used. I started using Eagle (on version 5.11.0) sometime in early 2011. I stopped on version 6.6.0 in mid 2017. Some of the more interesting projects I completed using Eagle are:

  • Analog Synth - a bunch of analog (and digital) DIY synth modules. Designed, built, and tested by your truly. This includes VCOs, VCFs, VCAs, sequencers, front-panel designs, digital delay, manual oscillators, and power-distribution interconnect PCBs.
  • Stroboscope - a device that can turn on and off LEDs very fast (at audio frequencies) in order to produce interesting/useful/helpful visual effects. A stroboscope can be used to enable a human to monitor the rotation of things in real time, e.g. fans, drills, wheels, motors, spinning objects, guitar strings, and any other object engaged in cyclic motion.
  • VU Meter - a circuit that represents audio amplitude vertically on several bargraphs (each bargraph displays the amplitude of a given section of the audio spectrum). The device can be used to build a real-time visual audio spectrum analyzer.
  • FreqCount84 - Atmel microcontroller-based design for precise measurement of frequency of square waves. I believe the hwardware & firmware achieved an accuracy of ± a few ppm with the help of a 1.5 pm TCXO.
  • 9x9 LED Matrix - a 2D array of LEDs (9 LEDs wide, 9 LEDs tall). I remember wanting to build an array that had an odd number of pixels because it would allow me to make symetric visual displays. I programmed a game of pong for this 9x9 LED Matrix. That code exists in my repo for Arduino programs.
  • Prototype Boards - three PCBs that enable DIY circuit construction. 0.1"-arrays of SMD pads, 0.1"-arrays of through-holes, SOT-to-DIP break-out-boards, SOIC-to-DIP break-out-boards, etc...

LTspice IV

I have used LTspice version IV to simulate some of my circuits.

Parts

95
QtyValueFootprintReferences
2210nCapacitors_SMD:C_0603_HandSolderingC1, C10, C11, C12, C13, C14, C15, C16, C17, C19, C20, C21, C22, C23, C24, C25 +6
9BC847CWTO_SOT_Packages_SMD:SOT-323_SC-70_HandsolderingQ1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9
8100kResistors_SMD:R_0603_HandSolderingR14, R15, R16, R17, R30, R31, R32, R33
810MResistors_SMD:R_0603_HandSolderingR5, R6, R10, R12, R22, R23, R26, R28
81MResistors_SMD:R_0603_HandSolderingR8, R9, R11, R13, R24, R25, R27, R29
510kResistors_SMD:R_0603_HandSolderingR3, R4, R20, R21, R34
410kPotentiometers:Potentiometer_Trimmer_Bourns_3296WRV1, RV2, RV3, RV4
44.7Resistors_SMD:R_0603_HandSolderingR1, R2, R18, R19
4AUDIOPin_Headers:Pin_Header_Straight_1x01_Pitch2.54mmJ1, J2, J7, J8
4ENVPin_Headers:Pin_Header_Straight_1x01_Pitch2.54mmJ3, J4, J9, J10
4Input CoilPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmL1, L2, L3, L4
4PULSEPin_Headers:Pin_Header_Straight_1x01_Pitch2.54mmJ5, J6, J11, J12
2LM833Housings_DIP:DIP-8_W7.62mmU1, U5
10Resistors_SMD:R_0603_HandSolderingR7
110µCapacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_WaveC18
174HC14Housings_DIP:DIP-14_W7.62mmU4
178L05TO_SOT_Packages_THT:TO-92_Inline_WideU2
1Power InPin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJ13
1Power OutPin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJ14
1TL084SMD_Packages:SOIC-14_NU3

The 93 most common of 95 parts.

More from jensenr30/cad

3
  • 2 layers100 × 100 mmInput Board Panel, the printed circuit board in 3D

    Input Board Panel

    jensenr30/cad

    Schematics, PCBs, Simulations, ...

    380 parts1
  • 2 layers100 × 100 mmSRBOB, the printed circuit board in 3D

    SRBOB

    jensenr30/cad

    Schematics, PCBs, Simulations, ...

    76 parts1

Similar boards

  • 4 layers83 × 53 mmSoftware dev board, the printed circuit board in 3D

    Software dev board

    awsmit07/Software_dev_board

    Development Board for the University of Calgary Solar Car Team

    86 parts
  • 2 layers104 × 129 mmModbus master, the printed circuit board in 3D

    Modbus master

    magnusbpt/Modbus-wireless

    83 parts
  • 2 layers36.8 × 34.7 mmTinylab proto1, the printed circuit board in 3D

    Tinylab proto1

    espotek-org/Labrador

    EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!

    79 parts1.2k
  • 2 layers51.8 × 32.6 mmC64-rf modulator replacement, the printed circuit board in 3D

    C64-rf modulator replacement

    mbarszcz-pcb/c64-rf-modulator-replacement

    C64 Composite/S-Video RF Modulator Replacement

    33 parts86MIT
  • 2 layers86.4 × 69.9 mmPeaks, the printed circuit board in 3D

    Peaks

    matias-levy/peaks

    A fully-functional low-cost reversion of Mutable instrument's Peaks

    54 parts58
  • 2 layers106 × 95.4 mmHardmpu wt, the printed circuit board in 3D

    Hardmpu wt

    PickledDog/hardmpu-wt

    HardMPU with wavetable module support

    50 parts30Apache-2.0
  • 2 layers41.1 × 110.7 mmJNTUB, the printed circuit board in 3D

    JNTUB

    joyfulnoisesynth/JNTUB

    JoyfulNoise Tiny Utility Board

    84 parts26
  • 2 layers99.1 × 63.5 mmMerger euro, the printed circuit board in 3D

    Merger euro

    b38tn1k/chordtoy

    MIDI Hardware Chord Generator

    39 parts19MIT

Questions

How big is the Input Board PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Input Board use?

95 parts, built around the TL084, 74HC14, 78L05 and BC847CW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Input Board KiCad files?

From the jensenr30/cad repository on GitHub, at the commit this page was made from: the board is kicad4/XPhone/Input_Board/Input_Board.kicad_pcb and its schematic kicad8/expression-pedal-to-pwm/expression-pedal-to-pwm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Input Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask jensenr30 before reusing the design.