Skip to the content
2 layers120 × 110.5 mmBt traffic mon, the printed circuit board in 3D

Researching of traffic monitoring by Bluetooth scanning

Size
120 × 110.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
158
Nets
284
Pads
772
Tracks, vias
2,283, 263
Pours
6
Routed
Yes
KiCad
KiCad 4
Created
28 Jul 2016
Updated
28 Jul 2016

Overview

Bt traffic mon is an open-source printed circuit board by jekhor, from the jekhor/bluetooth-traffic-mon repository on GitHub. It is a 2-layer board of 120 × 110.5 mm with 158 parts on 284 nets, routed with 2,283 tracks and 263 vias.

It is built around the MAX3483EPA+, BC846 and B340A, with the 1SS357, IRLML6402TRPBF and PSR05 among its other parts. Its parts include 69 resistors, 21 capacitors, 7 inductors, 3 crystals and 1 switch.

Main components

9

Parts

158
QtyValueFootprintReferences
1247KSMD_R_0603R1, R3, R17, R18, R19, R20, R48, R49, R61, R64, R67, R68
111KSMD_R_0603R23, R25, R26, R37, R38, R39, R40, R42, R53, R56, R65
910KSMD_R_0603R30, R32, R33, R34, R35, R36, R50, R51, R52
9HL_LEDSMD_Led_0603HL1, HL2, HL3, HL4, HL5, HL6, HL7, HL8, HL9
812KSMD_R_0603R2, R4, R5, R6, R11, R12, R13, R14
84,7KSMD_R_0603R24, R44, R45, R46, R47, R58, R63, R66
6BC846SMD_SOT23_3VT3, VT4, VT5, VT6, VT7, VT8
41,5KSMD_R_0603R27, R28, R29, R31
450SMD_R_0603R7, R8, R9, R10
4B340ASMD_DO214AC_SMAVD1, VD2, VD4, VD5
30,1 uFSMD_C_0603C17, C18, C21
30,1uFSMD_C_0603C7, C11, C15
31SS357SMD_SOD323_WVD7, VD8, VD9
31uFSMD_C_0603C5, C9, C13
322SMD_R_0603R59, R60, R62
3560SMD_R_0603R15, R16, R69
3L_IND_CORESMD_IND_0805L1, L3, L4
3MountingHole_4mmMounting_Holes:MountingHole_4mm, ,
2100SMD_R_0603R55, R57
2100uFSMD_c_tant_CC4, C12
210nSMD_C_0603C1, C2
210nHSMD_IND_0603L6, L7
215SMD_C_0603C19, C20
22,2KSMD_R_0603R21, R22
2IRLML6402TRPBFSMD_SOT23_3VT1, VT2
2PSR05SMD_SOT143DA3, DA4
2TPS2051SMD_SO8N_50_150DA1, DA2
2U.FLu.FLXW1, XW2
2XP_CONN_10_MCONN_BH-10XP4, XP7
2XP_CONN_20_MCONN_PLD-20XP3, XP6
2XS_CONN_02_FCONN_TERM_2pXS2, XS3
1100KSMD_R_0603R41
1100nSMD_C_0603C3
122 nHSMD_IND_0603L5
1330uFSMD_c_tant_EC10
1330uFSMD_c_tant_CC6
1330uFSMD_c_tant_DC14
14,7 uFSMD_C_0603C16
143KSMD_R_0603R43
147 uH L39DISCRET_IND_Toroid_8x16mm_VL2
147388-200147388-2001X3
1680uFCP_R_100_2C8
1DIP_SW4DIP-8__300S1
1ESDA6V1W5TO_SOT_Packages_SMD:SOT-353DA9
1GB_BATDISCRET_BAT_CR2032VGB1
1HR911105ACONN_RJ45ETHXS1
1LM2596-5.0bt-traffic-mon:SMD_TO263_5DA7
1LM75ASMD_SO8N_50_150DA5
1MAX3483ESMD_SO8N_50_150DD1
1MIC29150-3.3BU(WU)SMD_TO263-3DA8
1MIC29302BU(WU)bt-traffic-mon:SMD_TO263_5DA6
1RESSMD_R_0603R54
1SB_1-2SMD_SWT_pushSB1
1SDCARDSMD_SOCKET_SDCARD_SD-03X2
1SE-IMX287-MICROSE-iMX287-MicroM1
1SIM68VSIM68VM2
1SIM900RSIM900M3
1SK35/MBRS360SMD_DO214AB_SMCVD3
1SL02SMD_DO219ABVD6
1USB-A-DUALCONN_usb_Ax2X1
1WT11IWT11iM4
1XP_CONN_04_MCONN_PLS-4XP2
1XP_CONN_08_MCONN_PLD-8XP5
1XP_CONN_18_MCONN_PLD-18XP1

More from jekhor/bluetooth-traffic-mon

2
  • 2 layers83.8 × 50.8 mmTiwi prototype, the printed circuit board in 3D

    Tiwi prototype

    jekhor/bluetooth-traffic-mon

    Researching of traffic monitoring by Bluetooth scanning

    23 parts
  • 2 layers38.7 × 55.9 mmTiwi breakout, the printed circuit board in 3D

    Tiwi breakout

    jekhor/bluetooth-traffic-mon

    Researching of traffic monitoring by Bluetooth scanning

    3 parts

Similar boards

  • 2 layers50 × 61 mmENP KIT-232-485-CAN, the printed circuit board in 3D

    ENP KIT-232-485-CAN

    Enapter/ucm-kit-open-hardware

    Enapter UCM Kit – open hardware for connecting your energy devices.

    32 parts4
  • 4 layers100 × 50 mmSketchverter5000, the printed circuit board in 3D

    Sketchverter5000

    MECSEM/electrical

    All the electrical designs for MECSEM.

    68 partsGPL-3.0
  • 4 layers105 × 140 mmVna r1, the printed circuit board in 3D

    Vna r1

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    555 parts205
  • 2 layers109 × 74 mmStm32, the printed circuit board in 3D

    Stm32

    eddyem/tsys01

    BTA primary mirror thermal monitoring using STM32 and TSYS01

    92 parts4GPL-3.0
  • 4 layers38.5 × 47 mmSIM7080, the printed circuit board in 3D

    SIM7080

    techstudio-design/sim7080_dev_board

    SIM7080 Dev Board hardware design files

    55 parts17
  • 4 layers92 × 50.4 mmLevelSensor v2.0, the printed circuit board in 3D

    LevelSensor v2.0

    lucasnoce/IC-LevelSensor_v2

    Water level sensor with NBIoT data transmission

    125 parts1
  • 4 layers44 × 55.1 mmAg ce A7671G card, the printed circuit board in 3D

    Ag ce A7671G card

    Open-Air-Foundation/pcb-module-ce-card

    The CE card adds 4G cellular connectivity (LTE Cat 1) to AirGradient monitors. It can be used in the AirGradient Open Air, the AirGradient ONE, and the Open Air Max.

    106 parts1CC-BY-SA-4.0
  • 4 layers56 × 52 mmEdgeLink S3 Cellular, the printed circuit board in 3D

    EdgeLink S3 Cellular

    CDonohoe-Designs/EdgeLink_S3_Cellular

    EdgeLink S3 Cellular is a four-layer embedded hardware platform combining an ESP32-S3 controller, SIM7080G cellular/GNSS modem, USB-C, battery power management and environmental/motion sensing.

    114 parts

Questions

How big is the Bt traffic mon PCB?

It measures 120 × 110.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Bt traffic mon use?

158 parts, built around the MAX3483EPA+, BC846, B340A and 1SS357. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bt traffic mon KiCad files?

From the jekhor/bluetooth-traffic-mon repository on GitHub, at the commit this page was made from: the board is kicad/bt-traffic-mon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bt traffic mon design in my own project?

Its repository states no licence, so its author keeps all rights: ask jekhor before reusing the design.