Skip to the content
2 layers29 × 106.5 mm555 eg, the printed circuit board in 3D
Size
29 × 106.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
32
Pads
124
Tracks, vias
164, 3
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 Nov 2025
Updated
25 Oct 2026

Overview

555 eg is an open-source printed circuit board by jehoz, from the jehoz/modular-synth repository on GitHub. It is a 2-layer board of 29 × 106.5 mm with 45 parts on 32 nets, routed with 164 tracks and 3 vias.

It is built around the NE555P and B10K. Its parts include 14 resistors, 9 capacitors, 7 diodes, 4 connectors and 3 transistors.

Main components

2

Parts

45
QtyValueFootprintReferences
51N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5
40.1uFCapacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C6, C7, C8, C9
44.7kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R4, R6, R9
3220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR7, R8, R10
32N3904Package_TO_SOT_THT:TO-92_InlineQ1, Q2, Q3
347uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC3, C4, C5
3A100kConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalRV1, RV2, RV4
2100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR13, R14
2100kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR11, R12
210kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R5
210nFCapacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C1, C2
21N5819Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD6, D7
122kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3
1B10KConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalRV3
1Envelope OutCustomStuff:PinHeader_1x03_P2.54mm_Vertical_AudioJackJ2
1Gate InCustomStuff:PinHeader_1x03_P2.54mm_Vertical_AudioJackJ1
1Inverted OutCustomStuff:PinHeader_1x03_P2.54mm_Vertical_AudioJackJ3
1NE555PPackage_DIP:DIP-8_W7.62mmU1
1Power ConnectorConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ4
1TL074Package_DIP:DIP-14_W7.62mm_SocketU2

The 43 most common of 45 parts.

More from jehoz/modular-synth

5
  • 2 layers268.6 × 134.5 mm2164 vca, the printed circuit board in 3D

    2164 vca

    jehoz/modular-synth

    87 parts
  • 2 layers49.5 × 106.5 mmMfos vca, the printed circuit board in 3D

    Mfos vca

    jehoz/modular-synth

    75 parts
  • 2 layers165.3 × 128.5 mmMk vco, the printed circuit board in 3D

    Mk vco

    jehoz/modular-synth

    67 parts
  • 2 layers79.5 × 128.5 mmSimple lfo, the printed circuit board in 3D

    Simple lfo

    jehoz/modular-synth

    43 parts
  • 2 layers120 × 128.5 mmMix4, the printed circuit board in 3D

    Mix4

    jehoz/modular-synth

    39 parts

Similar boards

  • 2 layers96.5 × 20.3 mmAvalancheVCO, the printed circuit board in 3D

    AvalancheVCO

    kassu/kassutronics

    Projects, documentation... all things synthesizers and electronics

    21 parts183
  • 2 layers99.1 × 109.2 mmModule, the printed circuit board in 3D

    Module

    zlosynth/kaseta

    Saturating tape delay and feedback sculptor.

    71 parts59CC-BY-SA-4.0
  • 2 layers86.4 × 69.9 mmPeaks, the printed circuit board in 3D

    Peaks

    matias-levy/peaks

    A fully-functional low-cost reversion of Mutable instrument's Peaks

    54 parts58
  • 2 layers48.4 × 106.3 mmAchordion, the printed circuit board in 3D

    Achordion

    zlosynth/achordion

    Chord-crafting quantizing wavetable oscillator.

    55 parts38CC-BY-SA-4.0
  • 2 layers9.9 × 110.1 mmADSR, the printed circuit board in 3D

    ADSR

    kraakenstuff/ADSR

    2HP ADSR module based on "Fastest Envelope in the West" by René Schmitz (https://www.schmitzbits.de/adsr.html)

    44 parts37
  • 2 layers181.5 × 128.5 mmAndes 10HP, the printed circuit board in 3D

    Andes 10HP

    niektb/sluisbrinkie-eurorack-published

    Published Modules of the Sluisbrinkie project

    158 parts34
  • 2 layers81.3 × 96.5 mmMidi2cv, the printed circuit board in 3D

    Midi2cv

    tomarus/midi2cv

    Eurorack MIDI2CV and Arpeggiator using an Arduino Nano.

    63 parts31
  • 2 layers85 × 128.5 mmMiniVerb, the printed circuit board in 3D

    MiniVerb

    benjiaomodular/MiniVerb

    A through-hole reverb module for Eurorack based around the Daisy Seed by Electrosmith

    59 parts28MIT

Questions

How big is the 555 eg PCB?

It measures 29 × 106.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 555 eg use?

45 parts, built around the NE555P and B10K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 555 eg KiCad files?

From the jehoz/modular-synth repository on GitHub, at the commit this page was made from: the board is 555_eg/555_eg.kicad_pcb and its schematic 2164_vca/2164_vca.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 555 eg design in my own project?

Its repository states no licence, so its author keeps all rights: ask jehoz before reusing the design.