2 layers245.2 × 100 mm
V5 main
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
160 parts156
2 layers18.8 × 22.5 mm
RTC RV-3028-C7-breakout
jedp/RTC-RV-3028-C7-breakoutRTC RV-3028-C7 Brekaout Board
- Size
- 18.8 × 22.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 9
- Pads
- 34
- Tracks, vias
- 80, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Apr 2023
- Updated
- 21 Apr 2023
Overview
RTC RV-3028-C7-breakout is an open-source printed circuit board by jedp, from the jedp/RTC-RV-3028-C7-breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 18.8 × 22.5 mm with 13 parts on 9 nets, routed with 80 tracks and 6 vias.
It is built around the RV-3028-C7. Its parts include 6 resistors, 2 capacitors, 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdRTC RV-3028-C7 Breakout Board
If you're using an Arduino, this goes nicely with Constantin Koch's RV-3038-C7-Arduino_Library, which you can download direcly from the Arduino Library Manager.
Dimensions: 18.8mm x 22.6mm.
BOM
- U1: RV-3028-C7 RTC
- C1: 0.1µ 0603
- C2: 0.1µ 0603
- R1: 10k 0603 (Do Not Populate; see datasheet for details.)
- R2: 10k 0603
- R3: 1k 0603
- R4: 10k 0603
- R5: 10k 0603
- R6: 10k 0603
- BT1: MS621F battery
- J1: Conn 1x4 female, 2.54mm
- J2: Conn 1x4 female, 2.54mm
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R5, R6 |
| 2 | 0.1µ | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | LOGO | LOGO | G*** |
| 1 | MS621F | Battery:BatteryHolder_Seiko_MS621F | BT1 |
| 1 | RV-3028-C7 | RTC_Footprints:RV-3028-C7 | U1 |
Similar boards
- 2 layers75 × 40 mm
PicoTop Board Rev2
7west/PicoTop
A very basic computer & OS based on the RP2350 microcontroller
86 parts66 - 2 layers47.2 × 55.5 mm
Tinta l2
c0de111/tinta
Battery-powered e-paper sign: room signage, sensor graphs, home automation, or anything over Wi-Fi. Wakes by real-time clock, NFC tap, or button. Raspberry Pi Pico W firmware, custom PCB, and 3D-printed case included.
60 parts39Apache-2.0 - 2 layers36.4 × 29.4 mm
Kicad Smart Watch
AFLProjects/DIY-Smart-Watch
DIY Smart Watch with ATMEGA32U4 , ST7789 SPI display and RV3028-C7 Extreme Low Power RTC Module
63 parts12 - 6 layers50 × 23 mm
Esp32p4amoled3.19
v-cu/dpf-load-monitor-wide
ESP32-P4 diagnostic display for VAG diesels — live DPF and engine data over CAN (UDS) on a 3.19" ultra-wide AMOLED. Firmware, KiCad files, BOM and 3D enclosure.
115 parts12 - 4 layers51 × 77 mm
- 2 layers90 × 100 mm
- 4 layers77 × 48.6 mm
NX ISD
Ghost3379/NX-ISD
A more sophisticated version of the Artemis Watch by Circuitmess.
116 parts2GPL-3.0
Questions
How big is the RTC RV-3028-C7-breakout PCB?
It measures 18.8 × 22.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RTC RV-3028-C7-breakout use?
13 parts, built around the RV-3028-C7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RTC RV-3028-C7-breakout KiCad files?
From the jedp/RTC-RV-3028-C7-breakout repository on GitHub, at the commit this page was made from: the board is RTC-RV-3028-C7-breakout/RTC-RV-3028-C7-breakout.kicad_pcb and its schematic RTC-RV-3028-C7-breakout/RTC-RV-3028-C7-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RTC RV-3028-C7-breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).