Skip to the content
2 layers21.8 × 26 mmLIS3DH breakout, the printed circuit board in 3D

LIS3DH breakout

jedp/LIS3DH-breakout

LIS3DH three-axis accelerometer breakout board

Size
21.8 × 26 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
18
Pads
55
Tracks, vias
127, 15
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
20 Feb 2023
Updated
20 Feb 2023

Overview

LIS3DH breakout is an open-source printed circuit board by jedp, from the jedp/LIS3DH-breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 21.8 × 26 mm with 16 parts on 18 nets, routed with 127 tracks and 15 vias.

It is built around the LIS3DH. Its parts include 5 resistors, 3 capacitors, 2 connectors and 1 diode. It belongs with the interfaces and adapters and sensors and measurement boards of this library.

Main components

1

README

README.md

LIS3DH Breakout Board

Three-axis linear accelerometer. Configurable as I2C or SPI.

PCB image

Parts

16
QtyValueFootprintReferences
20.1µCapacitor_SMD:C_0603_1608MetricC2, C3
2100kResistor_SMD:R_0603_1608MetricR1, R4
210kResistor_SMD:R_0603_1608MetricR2, R3
2Conn_01x06_FemaleConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1, J2
110µCapacitor_SMD:CP_Elec_4x4.5C1
11kResistor_SMD:R_0603_1608MetricR5
1I2C ADDRJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmI2C_ADDR
1I2C ENJumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mmI2C_EN
1LED PWRLED_SMD:LED_0603_1608MetricD1
1LIS3DHPackage_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5yLIS3DH
1LOGOLOGOG***
1VCC_IO = VCCJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmVDD_IO_3V3

Similar boards

  • 2 layers52 × 26 mmDml10, the printed circuit board in 3D

    Dml10

    jonnor/embeddedml

    Notes on Machine Learning on edge for embedded/sensor/IoT uses

    51 parts317
  • 2 layers89.8 × 10.2 mmODGIRON v1.0-F4x1-0412, the printed circuit board in 3D

    ODGIRON v1.0-F4x1-0412

    oldgerman/ODGIRON

    基于 ironOS 的 PD T12 电烙铁

    125 parts34GPL-3.0
  • 4 layers83 × 83 mmBlinkekatze, the printed circuit board in 3D

    Blinkekatze

    TobleMiner/blinkekatze

    Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays

    134 parts34
  • 2 layers59.2 × 93.2 mmAws iot expresslink demo badge, the printed circuit board in 3D

    Aws iot expresslink demo badge

    aws/iot-expresslink

    This device was designed and created for the AWS IoT ExpressLink Demo Badge Workshop, which was run at re:Invent 2022.

    74 parts29MIT-0
  • 8 layers50 × 50 mmUSB C PSU, the printed circuit board in 3D

    USB C PSU

    LeoDJ/USB-C_PD_PSU

    A 5-60V bidirectional buck-boost-converter, also capable of 240W USB PD EPR (48V 5A)

    149 parts29
  • 2 layers56.5 × 66.8 mmTracker v1, the printed circuit board in 3D

    Tracker v1

    angelnu/LorawanSensor

    LoraWan soil sensor

    45 parts22MIT
  • 4 layers55.5 × 48 mmDuet3 TB 1LC, the printed circuit board in 3D

    Duet3 TB 1LC

    Duet3D/Duet3-Toolboard-1LC

    Hardware information for the Duet 3 Toolboard 1LC

    190 parts15

Questions

How big is the LIS3DH breakout PCB?

It measures 21.8 × 26 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LIS3DH breakout use?

16 parts, built around the LIS3DH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LIS3DH breakout KiCad files?

From the jedp/LIS3DH-breakout repository on GitHub, at the commit this page was made from: the board is LIS3DH-breakout.kicad_pcb and its schematic LIS3DH-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LIS3DH breakout design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).