Skip to the content
2 layers41.3 × 50.8 mmDohikey, the printed circuit board in 3D

Temperature and Humidity sensor with a motor using an Arduino Nano, a DHT11 Temperature sensor, an Adafruit 7 segment display, and a computer fan.

Size
41.3 × 50.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
33
Pads
52
Tracks, vias
48, 0
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Mar 2026
Updated
18 Mar 2026

Overview

Dohikey is an open-source printed circuit board by JBorges-dotcom, from the JBorges-dotcom/Temp-Humidity-with-motor repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 41.3 × 50.8 mm with 11 parts on 33 nets, routed with 48 tracks and 0 vias.

It is built around the DHT11 and PN2222A. Its parts include 3 connectors, 1 diode and 1 transistor. It belongs with the lEDs and displays and sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

This is a basic project to circulate air inside of the greenhouse in my apartment to prevent mold and fungus flies. It uses an Arduino Nano to read a DHT11 temp/humidity sensor and display the readings to a 7-segment LCD. It also has a small DC motor to circulate the air by turning on and off every 15 minutes. image

The board has dimensions 53.4mm x 61.5 mm.

Some photos of the initial prototype board: image

Another with the lights off so it's easier to see the LCD screen. The first two numbers show the temperature in Fahrenheit, and the last two numbers show the humidity percentage. image

Parts

11
QtyValueFootprintReferences
3MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3
11N4001Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
1270Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal270R
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1Barrel_Jack_Switch_Pin3RingConnector_BarrelJack:BarrelJack_HorizontalJ4
1Conn_01x04_PinConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical7 SEG
1DHT11Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ2
1MotorConnector_PinSocket_2.54mm:PinSocket_2x01_P2.54mm_VerticalJ3
1PN2222APackage_TO_SOT_THT:TO-92_InlineQ1

Similar boards

  • 2 layers169 × 87 mmThermostat v2, the printed circuit board in 3D

    Thermostat v2

    ANTzacalie/termo-pro-esp32

    Full-featured smart thermostat built on the ESP32 platform.

    26 parts1CERN-OHL-P-2.0
  • 2 layers59.9 × 99.7 mmOffice Automation, the printed circuit board in 3D

    Office Automation

    theaparnaprabhu/Applied-Projects

    Applied, hands-on projects that go beyond quick learning exercises — real builds combining hardware, firmware, and design.

    31 parts
  • 2 layers251.4 × 175.7 mmCalidadAire, the printed circuit board in 3D

    CalidadAire

    unloquer/circuitosKicad

    libreria de footprints y componentes, pcb's, esquematicos

    45 parts
  • 2 layers152.4 × 101.6 mm8088-FE2010A SBC, the printed circuit board in 3D

    8088-FE2010A SBC

    skiselev/micro_8088

    Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset

    72 parts412GPL-3.0
  • 2 layers33.7 × 66 mmSmartbell, the printed circuit board in 3D

    Smartbell

    Staacks/there.oughta.be

    Projects featured on my blog at https://there.oughta.be

    27 parts108GPL-3.0
  • 4 layers100 × 100 mm2063-Z80, the printed circuit board in 3D

    2063-Z80

    Z80-Retro/2063-Z80

    Retro Z80 CPU Board

    86 parts96
  • 2 layers30.7 × 76.1 mmRepeater v2, the printed circuit board in 3D

    Repeater v2

    plusvic/simplebus2-intercom

    General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.

    17 parts95CC0-1.0

Questions

How big is the Dohikey PCB?

It measures 41.3 × 50.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dohikey use?

11 parts, built around the DHT11 and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dohikey KiCad files?

From the JBorges-dotcom/Temp-Humidity-with-motor repository on GitHub, at the commit this page was made from: the board is dohikey.kicad_pcb and its schematic dohikey.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dohikey design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).