2 layers82 × 54.5 mm
2 layers214.3 × 140.5 mm
Keyboard
jbmorley/little-luggable29Raspberry Pi Cyberdeck
- Size
- 214.3 × 140.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 134
- Nets
- 87
- Pads
- 744
- Tracks, vias
- 1,131, 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Dec 2022
- Updated
- 7 Nov 2026
Overview
Keyboard is an open-source printed circuit board by jbmorley, from the jbmorley/little-luggable repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 214.3 × 140.5 mm with 134 parts on 87 nets, routed with 1,131 tracks and 2 vias.
Its parts include 65 switches, 64 diodes and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdLittle Luggable
Raspberry Pi Cyberdeck
Overview
The Little Luggable is my take on a cyberdeck. It's built around the Raspberry Pi 5 and the Pelican 1150 Protector Case. It includes a fully-custom mechanical keyboard designed to perfectly fit the lid of the 1150.
Check out the project page for more.
License
Little Luggable is Copyright (c) 2022-2026 Jason Morley (see COPYRIGHT) and licensed under the Creative Commons Attribution 4.0 International License (see LICENSE). Unless otherwise stated, photographs are Copyright (c) 2026 Mar Mizunaka, and cannot be reproduced without permission.
The Little Luggable depends on the following separately licensed third-party libraries and components:
- Keebio Components, MIT License
- Keebio-Parts.pretty, MIT License
- marbastlib, CERN Open Hardware Licence Version 2 – Permissive
- Nabla, SIL Open Font License 1.1
- Recursive, SIL Open Font License 1.1
- ZMK, MIT License
Parts
134| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +48 |
| 64 | MX_SW_HS | marbastlib-mx:SW_MX_HS_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +48 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BATTERY1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | POWER |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | DISPLAY |
| 1 | MX_stab | marbastlib-mx:STAB_MX_P_2u | S1 |
| 1 | ProMicro | Keebio-Parts:ArduinoProMicro | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H13mm | RESET |
Questions
How big is the Keyboard PCB?
It measures 214.3 × 140.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyboard use?
134 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard KiCad files?
From the jbmorley/little-luggable repository on GitHub, at the commit this page was made from: the board is keyboard/keyboard.kicad_pcb and its schematic keyboard/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 100 mm
- 2 layers228 × 114 mm
- 2 layers169.3 × 128 mm
PSU PCB
ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.
134 parts96 - 2 layers304 × 133.5 mm
- 2 layers238.6 × 95.3 mm
- 2 layers80.6 × 146.7 mm
- 2 layers100 × 80 mm
Panel
richardeoin/ax
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
134 parts48