

Z80ram
AVR-based bootloader, I/O, and debugging for Z80-based computers
- Size
- 99.8 × 49.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 60
- Pads
- 221
- Tracks, vias
- 585, 36
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 Jan 2018
- Updated
- 12 Nov 2025
Overview
Z80ram is an open-source printed circuit board by jblang, from the jblang/z80ctrl repository on GitHub. It is a 2-layer board of 99.8 × 49.9 mm with 19 parts on 60 nets, routed with 585 tracks and 36 vias.
It is built around the 74HCT138D, 74HCT257D and 74HCT574D, with the AS6C4008-55PCN and DS1302+ among its other parts. Its parts include 6 capacitors, 6 ICs, 2 connectors, 1 resistor and 1 transistor. It belongs with the retro computing and games boards of this library.
Main components
574HCT138D
SO-16-40℃~+125℃ 160uA 20ns@4.5V,50pF 3/8 4.5V~5.5V 4mA 4mA 74HCT Decoder Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers74HCT257D
SO-16-40℃~+125℃ 16ns@4.5V,50pF 4.5V~5.5V 74HCT 8uA Tri-state output SO-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers74HCT574D
SO-20-300mil-40℃~+125℃ 1 18ns@4.5V,50pF 3.5pF 3ns 4.5V~5.5V 5ns 69MHz 6mA 6mA 74HCT Series 8 8uA D-Type Rising Edge Tri-State SOIC-20-300mil Flip Flops ROHSNexperiaFlip FlopsAS6C4008-55PCN
PDIP-320℃~+70℃ 2.7V~5.5V 30mA 4Mbit 4uA 55ns Parallel Port (Parallel) PDIP-32 SRAM ROHSAlliance MemorySRAMDS1302+
DIP-80℃~+70℃ 1nA 2V~5.5V 300nA Backup power management and battery charging、InsideSRAM/NVRAM External No SPI DIP-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
README
hardware/iox/README.mdParts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C4, C5, C6 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 10K | Resistor_THT:R_Array_SIP5 | RN1 |
| 1 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 32.768kHz | Crystal:Crystal_DS26_D2.0mm_L6.0mm_Horizontal | Y1 |
| 1 | 74HCT138 | Package_DIP:DIP-16_W7.62mm | U5 |
| 1 | 74HCT257 | Package_DIP:DIP-16_W7.62mm | U3 |
| 1 | 74HCT574 | Package_DIP:DIP-20_W7.62mm | U2 |
| 1 | AS6C4008-55PCN | Package_DIP:DIP-32_W15.24mm | U4 |
| 1 | BATT | Battery:BatteryHolder_Keystone_3001_1x12mm | BT1 |
| 1 | BUS | Connector_PinHeader_2.54mm:PinHeader_1x39_P2.54mm_Vertical | J1 |
| 1 | BUSEXT | Connector_PinHeader_2.54mm:PinHeader_1x23_P2.54mm_Vertical | J2 |
| 1 | DS1302+ | Package_DIP:DIP-8_W7.62mm | U6 |
| 1 | Z80CPU | Package_DIP:DIP-40_W15.24mm | U1 |
More from jblang/z80ctrl
4- 4 layers101.6 × 53.3 mm

- 2 layers99.8 × 49.9 mm

- 2 layers99.8 × 49.9 mm

- 2 layers101.6 × 53.3 mm

Similar boards
- 4 layers85 × 56 mm

- 2 layers99.1 × 49.9 mm

- 2 layers99.1 × 49.9 mm

- 4 layers280 × 140 mm

P8x regbank card
ksr/p8x
Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…
113 parts - 2 layers300 × 200 mm

DATX JC100
Julesc013/project-carbon
Hardware and software for custom CPUs, FPUs, and computer systems.
172 parts - 2 layers99.1 × 49.9 mm

- 2 layers

LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0 - 2 layers249.9 × 89.4 mm

CSCvon8
DoctorWkt/CSCvon8
A crazy small 8-bit CPU built with only seventeen 7400-series chips.
55 parts112GPL-3.0
Questions
How big is the Z80ram PCB?
It measures 99.8 × 49.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Z80ram use?
19 parts, built around the 74HCT138D, 74HCT257D, 74HCT574D and AS6C4008-55PCN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Z80ram KiCad files?
From the jblang/z80ctrl repository on GitHub, at the commit this page was made from: the board is hardware/z80ram/z80ram.kicad_pcb and its schematic hardware/classic/z80ctrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Z80ram design in my own project?
Its repository states no licence, so its author keeps all rights: ask jblang before reusing the design.