2 layers71.1 × 95.3 mm
2 layers100.3 × 100.2 mm
Proyecto
javimenba/PCB-Alarma-Proyecto de investigación
- Size
- 100.3 × 100.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 57
- Pads
- 193
- Tracks, vias
- 673, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Apr 2019
- Updated
- 30 Apr 2019
Overview
Proyecto is an open-source printed circuit board by javimenba, from the javimenba/PCB-Alarma- repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100.3 × 100.2 mm with 46 parts on 57 nets, routed with 673 tracks and 7 vias.
It is built around the PIC18F4550-I/PT. Its parts include 15 resistors, 11 connectors, 8 capacitors, 5 diodes and 4 ICs. It belongs with the PIC boards of this library.
Main components
1Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R6, R7, R8, R9, R10, R11, R13, R15 |
| 6 | CAP | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3, C4, C5, C6, C7, C8 |
| 4 | LED | LED_THT:LED_D3.0mm_FlatTop | D1, D2, D3, D4 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
| 2 | CAP | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 1 | 2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | Alarma | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Alimentacion | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J2 |
| 1 | DIODE | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | D5 |
| 1 | Fuente de 3.3v | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | Fuente de 9-5v | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LCD | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J3 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U1 |
| 1 | PIC18F4550-IP | Package_DIP:DIP-40_W15.24mm | U3 |
| 1 | PORTA | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | PORTB | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J8 |
| 1 | PORTC | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J10 |
| 1 | PORTD | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J9 |
| 1 | PORTE | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J11 |
| 1 | Pickit 3 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J12 |
| 1 | R_POT | Potentiometer_THT:Potentiometer_Vishay_148-149_Single_Horizontal | RV1 |
| 1 | SW_Push_Dual_x2 | Button_Switch_THT:SW_PUSH_6mm | RESET |
| 1 | Teclado | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Vusb | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | hc-06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
Similar boards
- 2 layers161 × 177 mm
- 2 layers126 × 72.5 mm
Projeto I
Carlos9852/Sistemas_Embarcados
Projeto I da disciplina de Sistema Embarcados e Microcontroladores
44 parts - 2 layers110.5 × 80 mm
Digital clock
creyes2001/digital-clock
Bare-metal digital clock firmware for PIC18F4550 with multiplexed 7-segment display, EEPROM time storage, and cooperative scheduler.
40 parts - 2 layers
- 2 layers95.5 × 57 mm
Dspic30 simple
Esdras2/dspic30f-devboard-kit
Breadboard-friendly dsPIC30F4011 (DIP-40, all-THT) dev board—KiCad 8 hardware (Rev D) plus XC16 demo firmware, 12 V→5 V regulation, crystal clock & ICSP.
23 partsMIT - 2 layers39 × 28 mm
- 2 layers99.1 × 63.5 mm
Questions
How big is the Proyecto PCB?
It measures 100.3 × 100.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Proyecto use?
46 parts, built around the PIC18F4550-I/PT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Proyecto KiCad files?
From the javimenba/PCB-Alarma- repository on GitHub, at the commit this page was made from: the board is Proyecto.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Proyecto design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).