

Placa PIC18F4550
PIC18F4550 - TUTORIAL
- Size
- 71.1 × 95.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 50
- Pads
- 155
- Tracks, vias
- 206, 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jan 2018
- Updated
- 15 Sep 2020
Overview
Placa PIC18F4550 is an open-source printed circuit board by WelsTheory, from the WelsTheory/PIC18F4550-TUTORIAL repository on GitHub. It is a 2-layer board of 71.1 × 95.3 mm with 36 parts on 50 nets, routed with 206 tracks and 4 vias.
It is built around the PIC18F4550-I/PT and L7805. Its parts include 19 connectors, 6 capacitors, 5 resistors, 2 ICs and 2 switches. It belongs with the PIC boards of this library.
Main components
2PIC18F4550-I/PT
TQFP-44(10x10)-40℃~+85℃ 10bit 256Byte 2KB 32KB 35 4.2V~5.5V 48MHz 8 Bit Built-in FLASH PIC TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdPIC18F4550-TUTORIAL
HOLA! Yo soy Wels. En este repositorio encontrarás todos los archivos, documentos y ejemplos del tutorial del microcontrolador Pic18F4550 Los vídeos los puedes encontrar en mi canal: https://www.youtube.com/wels_theory Cualquier duda, sugerencia o comentario me lo puedes hacer a: FB: https://www.facebook.com/welstheory Twitter:https://twitter.com/soywels
Creado el 31/12/2017**
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R4, R5 |
| 3 | 100nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C4, C5, C6 |
| 2 | 15pF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C3 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13, J14 |
| 2 | GND | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J7, J12 |
| 2 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J15, J16 |
| 2 | VCC | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6, J9 |
| 1 | 20MHz | Crystal:Crystal_HC50_Vertical | Y1 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | Bluetooth | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J19 |
| 1 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J17 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | PIC18F4550-IP | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | PICKIT | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J11 |
| 1 | PORTA | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | PORTB | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | PORTC | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J5 |
| 1 | PORTD | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | PORTE | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | SPI | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J18 |
| 1 | SW_DPDT_x2 | Button_Switch_THT:SW_PUSH_E-Switch_FS5700DP_DPDT | SW2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J10 |
| 1 | Volt | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
More from WelsTheory/PIC18F4550-TUTORIAL
1- 2 layers71.1 × 95.3 mm

Similar boards
- 2 layers

- 2 layers95.5 × 57 mm

Dspic30 simple
Esdras2/dspic30f-devboard-kit
Breadboard-friendly dsPIC30F4011 (DIP-40, all-THT) dev board—KiCad 8 hardware (Rev D) plus XC16 demo firmware, 12 V→5 V regulation, crystal clock & ICSP.
23 partsMIT - 2 layers99.1 × 63.5 mm

- 2 layers99.7 × 99.7 mm

Lacerar
valentinbasel/domoticaro_hardware
diseño del PCB de placas basadas en pinguino, para trabajo con domotica en las escuelas
57 partsGPL-3.0 - 2 layers70 × 88 mm

- 2 layers100 × 70 mm

- 2 layers126 × 72.5 mm

Projeto I
Carlos9852/Sistemas_Embarcados
Projeto I da disciplina de Sistema Embarcados e Microcontroladores
44 parts - 2 layers110.5 × 80 mm

Digital clock
creyes2001/digital-clock
Bare-metal digital clock firmware for PIC18F4550 with multiplexed 7-segment display, EEPROM time storage, and cooperative scheduler.
40 parts
Questions
How big is the Placa PIC18F4550 PCB?
It measures 71.1 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Placa PIC18F4550 use?
36 parts, built around the PIC18F4550-I/PT and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Placa PIC18F4550 KiCad files?
From the WelsTheory/PIC18F4550-TUTORIAL repository on GitHub, at the commit this page was made from: the board is Placa_PIC18F4550/Placa_PIC18F4550 V1.5/Placa_PIC18F4550.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Placa PIC18F4550 design in my own project?
Its repository states no licence, so its author keeps all rights: ask WelsTheory before reusing the design.