2 layers85 × 55 mm
Singingcard
zeulewan/singingcard
Experiment: Claude Code autonomously designs and orders PCBs from start to finish
16 parts
2 layers56.7 × 27.7 mm
Solder
JavaScythe/dtectAdjustable small haptic controller for light sensor and button override.
- Size
- 56.7 × 27.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 6
- Pads
- 26
- Tracks, vias
- 41, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Jun 2025
- Updated
- 26 Jun 2025
Overview
Solder is an open-source printed circuit board by JavaScythe, from the JavaScythe/dtect repository on GitHub. It is a 2-layer board of 56.7 × 27.7 mm with 10 parts on 6 nets, routed with 41 tracks and 1 via.
It is built around the CR2032 and GL5528. Its parts include 2 capacitors, 2 resistors, 1 transistor and 1 switch.
Main components
2README
README.mddtect
Adjustable small haptic controller for light sensor and button override.
1x 2N3904 1x Motor 2x 10uF capacitor 2x CR2032 and holder 1x Potentmeter 1x GL5528 1x 220 Resistor
Slack: i10
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C1, C2 |
| 2 | CR2032 | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1, BT2 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | GL5528 | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R1 |
| 1 | Motor_DC | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | M1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Questions
How big is the Solder PCB?
It measures 56.7 × 27.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Solder use?
10 parts, built around the CR2032 and GL5528. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solder KiCad files?
From the JavaScythe/dtect repository on GitHub, at the commit this page was made from: the board is solder.kicad_pcb and its schematic solder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solder design in my own project?
Its repository states no licence, so its author keeps all rights: ask JavaScythe before reusing the design.
Similar boards
- 6 layers
CanSat 2019
ApoapsisHGV/CanSat2019-electronics
Circuit and PCB design files related to our 2019 CanSat competition
155 parts1MIT - 2 layers
- 2 layers78.9 × 82 mm
- 2 layers73.5 × 92.8 mm
- 2 layers92 × 82 mm
LakeTemp
foorschtbar/LakeTempESP
One of my first electronic projects 2011 based on a breadboard. It has lasted almost 10 years of continuous operation.
62 parts - 2 layers100.1 × 68 mm
- 2 layers98.5 × 79 mm
HALFLIFEPOCKETBEAM
rudranshjain0123/PocketBeam
A flashlight right? Is a flashlight, but a different one. 3 leds, a buzzer and even a darkness detector!
19 parts