2 layers
2 layers100.1 × 68 mm
Dimmer
MitryKz/Dimmer- Size
- 100.1 × 68 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 49
- Pads
- 179
- Tracks, vias
- 466, 33
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Jun 2021
- Updated
- 10 Nov 2021
Overview
Dimmer is an open-source printed circuit board by MitryKz, from the MitryKz/Dimmer repository on GitHub. It is a 2-layer board of 100.1 × 68 mm with 57 parts on 49 nets, routed with 466 tracks and 33 vias.
It is built around the ESP32-WROOM-32D, FAN3100TSX and AMS1117-3.3, with the TLP185, BAV99 and IRFP460APBF among its other parts. Its parts include 13 resistors, 8 connectors, 7 diodes, 6 switches and 5 capacitors. It belongs with the ESP32 boards of this library.
Main components
9
ESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
FAN3100TSX
SOT-23-5-40℃~+125℃ 1 13ns 3A 3A 4.5V~18V 500uA 9ns Low Side MOSFET Under Voltage Protection SOT-23-5 Gate Drivers ROHSonsemiGate Drivers
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TLP185
UncategorisedToshiba
BAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes
IRFP460APBF
TO-247AC-3-55℃~+150℃ 1 N-channel 105nC@10V 18pF 20A 270mΩ@10V 280W 3.1nF 480pF 4V 500V N-Channel TO-247AC-3 MOSFETs ROHSVishay IntertechnologyMOSFETs
1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching DiodesBC807
SOT-23-65℃~+150℃ 1 PNP 100 100nA 345mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
GL5528
插件,P=3mm-30℃~+70℃ 0.6 10kΩ~20kΩ 150V 1MΩ 30ms 30ms 540nm 插件,P=3mm Photoresistors ROHS森霸Photoresistors
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Key | Touch_pad:TestPoint_Pad_1.0x1.0sm | k2, k3, k4, k5, k6, k7 |
| 6 | Pin | SMout:polz_razjem | CLK1, CMD1, SD0, SD1, SD2, SD3 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R9, R13 |
| 3 | 220 | Resistor_SMD:R_1206_3216Metric | R10, R11, R12 |
| 2 | 120k 0.25W | Resistor_SMD:R_0603_1608Metric | R4, R6 |
| 2 | ADC | SMout:polz_razjem | S_VN1, S_VP1 |
| 2 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D1, D2 |
| 2 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4, J16 |
| 2 | IRFP460APBF | Package_TO_SOT_THT:TO-247-3_Horizontal_TabDown | Q1, Q2 |
| 2 | SW_Push | Touch_pad:aLIEXPRESS_BUTTON_G71Y | Mode1, RST2 |
| 1 | 0.01mk | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 0.47mk | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 100mk | Capacitor_SMD:C_1210_3225Metric | C4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 1N4148WT | Diode_SMD:D_SOD-523 | D4 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 2.2M | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 220 1W | Resistor_SMD:R_2512_6332Metric | R7 |
| 1 | 220to12 | SMout:oblast_bp | J1 |
| 1 | 220v_IN | SMout:OUT_IN(1) | J9 |
| 1 | 220v_OUT | SMout:OUT_IN(1) | J11 |
| 1 | 330k 0.25W | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U22 |
| 1 | BC807 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | BZX84Cxx | Diode_SMD:D_SOT-23_ANK | D3 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | Fan3100tsx | Package_TO_SOT_SMD:SOT-23-5 | D7 |
| 1 | GL5528 | SMout:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R3 |
| 1 | LM75B | SMout:Diodes_SO-8 | U1 |
| 1 | Prog | SMout:2pins | J2 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D6 |
| 1 | Rst | SMout:polz_razjem | RST1 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J22 |
| 1 | TLP185 | Package_SO:SOIC-4_4.55x3.7mm_P2.54mm | U4 |
| 1 | UART0 | SMout:4pins | J3 |
Questions
How big is the Dimmer PCB?
It measures 100.1 × 68 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dimmer use?
57 parts, built around the ESP32-WROOM-32D, FAN3100TSX, AMS1117-3.3 and TLP185. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dimmer KiCad files?
From the MitryKz/Dimmer repository on GitHub, at the commit this page was made from: the board is Dimmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dimmer design in my own project?
Its repository states no licence, so its author keeps all rights: ask MitryKz before reusing the design.
Similar boards
- 2 layers60 × 49 mm
- 2 layers41 × 42 mm
- 2 layers73.5 × 92.8 mm
- 2 layers61 × 77.8 mm
- 2 layers97 × 70 mm
DC CDI
romioRN/DC-CDI
ВНИМАНИЕ! в плате есть отсутствующие дjрожки если вы хотите это изготовить вам нужно внести исправления
90 parts1 - 6 layers236 × 150 mm
- 2 layers84 × 75 mm
