Skip to the content
2 layers63.5 × 43.2 mmKorean word clock, the printed circuit board in 3D
Size
63.5 × 43.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
24
Pads
63
Tracks, vias
92, 5
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Jun 2022
Updated
3 Jan 2026

Overview

Korean word clock is an open-source printed circuit board by jarodlam, from the jarodlam/korean-word-clock repository on GitHub. It is a 2-layer board of 63.5 × 43.2 mm with 16 parts on 24 nets, routed with 92 tracks and 5 vias.

It is built around the RV-3028-C7. Its parts include 7 resistors, 4 switches, 1 IC and 1 connector. It belongs with the lEDs and displays boards of this library.

Main components

1

Parts

16
QtyValueFootprintReferences
74K7Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2, R3, R4, R5, R6, R7
2MountingHoleMountingHole:MountingHole_3.2mm_M3_PadH1, H2
1BRIGHTNESSSparkFun-Switch:Push_PTH_12x12mmSW2
1DSTSparkFun-Switch:Slide_SPDT_PTH_11.6x4.0mmSW4
1LED STRIPConnector_Wire:SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mmJ1
1MODESparkFun-Switch:Push_PTH_12x12mmSW3
1PRO MICROSparkFun-Board:ProMicroCU1
1RV3028Pimoroni_RV3028:Pimoroni_RV3028_BreakoutA1
1TIMESparkFun-Switch:Push_PTH_12x12mmSW1

Similar boards

  • 2 layers245.2 × 100 mmV5 main, the printed circuit board in 3D

    V5 main

    zynthian/zynthian-hw

    Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

    160 parts156
  • 2 layers75 × 40 mmPicoTop Board Rev2, the printed circuit board in 3D

    PicoTop Board Rev2

    7west/PicoTop

    A very basic computer & OS based on the RP2350 microcontroller

    86 parts66
  • 2 layers47.2 × 55.5 mmTinta l2, the printed circuit board in 3D

    Tinta l2

    c0de111/tinta

    Battery-powered e-paper sign: room signage, sensor graphs, home automation, or anything over Wi-Fi. Wakes by real-time clock, NFC tap, or button. Raspberry Pi Pico W firmware, custom PCB, and 3D-printed case included.

    60 parts39Apache-2.0
  • 2 layers36.4 × 29.4 mmKicad Smart Watch, the printed circuit board in 3D

    Kicad Smart Watch

    AFLProjects/DIY-Smart-Watch

    DIY Smart Watch with ATMEGA32U4 , ST7789 SPI display and RV3028-C7 Extreme Low Power RTC Module

    63 parts12
  • 6 layers50 × 23 mmEsp32p4amoled3.19, the printed circuit board in 3D

    Esp32p4amoled3.19

    v-cu/dpf-load-monitor-wide

    ESP32-P4 diagnostic display for VAG diesels — live DPF and engine data over CAN (UDS) on a 3.19" ultra-wide AMOLED. Firmware, KiCad files, BOM and 3D enclosure.

    115 parts12
  • 4 layers51 × 77 mmBODAQS A8 board v1 0, the printed circuit board in 3D

    BODAQS A8 board v1 0

    benconnor1972/BODAQS

    Bicycle Open Data Acquisition System

    120 parts9
  • 2 layers90 × 100 mmHost shell, the printed circuit board in 3D

    Host shell

    shapoco/wildcardboy

    Handheld Game Console with Replaceable MCU

    241 parts5
  • 4 layers77 × 48.6 mmNX ISD, the printed circuit board in 3D

    NX ISD

    Ghost3379/NX-ISD

    A more sophisticated version of the Artemis Watch by Circuitmess.

    116 parts2GPL-3.0

Questions

How big is the Korean word clock PCB?

It measures 63.5 × 43.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Korean word clock use?

16 parts, built around the RV-3028-C7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Korean word clock KiCad files?

From the jarodlam/korean-word-clock repository on GitHub, at the commit this page was made from: the board is v2/pcb/pcb.kicad_pcb and its schematic v2/pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Korean word clock design in my own project?

Its repository states no licence, so its author keeps all rights: ask jarodlam before reusing the design.