Skip to the content
2 layers20 × 28 mmHall pcb, the printed circuit board in 3D

Simracing equipment, including hardware, software, and firmware design.

Size
20 × 28 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
3
Pads
10
Tracks, vias
12, 1
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
16 Jun 2023
Updated
20 Jul 2025

Overview

Hall pcb is an open-source printed circuit board by janc18, from the janc18/CAE32 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 20 × 28 mm with 4 parts on 3 nets, routed with 12 tracks and 1 via.

It is built around the MT9105ET. Its parts include 2 capacitors, 1 IC and 1 connector. It belongs with the ESP32 and STM32 boards of this library.

Main components

1

README

README.md

CAE32

CAE32 is a project for building and developing all stages of a gaming wheel for PC, specifically for the GNU/Linux operating system.

If you want to contribute, please read the CONTRIBUTING-english.md file.

Si tu quieres contribuir, por favor lee el documento CONTRIBUTING.md

Overall current status

Developing the UML diagram of the whole system

PCBs

status_pedals

status_shifter

status_steering_wheel

Firmware

Working on the development of the UML diagram for the pedals firmware

Software

Needed the improvement of compilation and flags for the user interface

The stages include:

  • PCB Design
  • Firmware
  • Driver (Kernel module if necessary)
  • Configuration and calibration through a graphical user interface (GTK-3)
  • Design of mechanisms for pedals, gear lever, and wheel
  • Power PCB design for feedback motor control (FFB)

PCB Sponsored by PCBWay

4

The PCB quality is excellent, the contact with the support service is good, they responded very quickly in the case of any issue, and it has a good PCB finish using the STM assembly service, all the IC pads are correctly soldered. Overall, the total cost of 5 PCBs and 2 PCBs with the assembly service is a very accessible, so I will keep using PCBWAY to build the next PCB iterations

PCBWay Webpage

Programming Frameworks and Tools

  • Espressif (ESP-IDF)
  • STM32CubeIDE
  • STM32CubeProgrammer

User Interface

The interface is developed with the GTK 3 framework, which will allow configurations such as:

  • Visualization of data graphically and textually (console)
  • Transmission type (Manual, Automatic, Sequential, custom) Natively
  • Pedal limits, sensitivity
  • Pedal type
    • Analog input (Potentiometer, Hall effect, and load cell)
    • SPI, I2C input (Custom sensor)
  • Firmware update

How to compile the project

  1. Install all the dependencies
bash
sudo apt install cmake make gcc pkgconf libevdev-dev libgtk-3-dev libgtk-3-0 libgtest-dev g++
  1. Run the script to check if all the dependencies was successfully installed
bash
./Source_code/checking_dependency.sh
  1. Execute the Makefile to build the graphic interface and the unit tests
sh
make -C Source_code/

Parts

4
QtyValueFootprintReferences
1100nfCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2
14.7nfCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
1Conn_01x03_FemaleConnector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_VerticalJ1
1MT9105ETPackage_TO_SOT_SMD:SOT-23U1

More from janc18/CAE32

2
  • 4 layers86 × 62 mmPedals, the printed circuit board in 3D

    Pedals

    janc18/CAE32

    Simracing equipment, including hardware, software, and firmware design.

    127 parts10GPL-3.0
  • 4 layers49.5 × 49.9 mmShifter, the printed circuit board in 3D

    Shifter

    janc18/CAE32

    Simracing equipment, including hardware, software, and firmware design.

    56 parts10GPL-3.0

Similar boards

  • 4 layers68 × 36.8 mmInduction encoder, the printed circuit board in 3D

    Induction encoder

    Twisted-Fields/induction_encoder

    An induction encoder with generator script for the Acorn steering system.

    72 parts22
  • 2 layers36 × 22 mmMag sensor, the printed circuit board in 3D

    Mag sensor

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    9 parts81
  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0

Questions

How big is the Hall pcb PCB?

It measures 20 × 28 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Hall pcb use?

4 parts, built around the MT9105ET. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hall pcb KiCad files?

From the janc18/CAE32 repository on GitHub, at the commit this page was made from: the board is Schematics/CAE32_PCB/Hall_PCB/hall_pcb/hall_pcb.kicad_pcb and its schematic Schematics/CAE32_PCB/Hall_PCB/hall_pcb/hall_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hall pcb design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).