
ECE445L Lab7
AndrewYin04/VR-Goggles-Embedded-Lab
The typical explanation for the repo structure. Lab specific instructions can be found further below.

A from-scratch reimagining of the Wii game "Just Dance": custom motion controller hardware (TM4C ARM Cortex-M4, SPI IMU, DAC audio) running on-device ML for real-time dance recognition, with MQTT syncing multiple controllers over Wi-Fi.
Controller PCB is an open-source printed circuit board by jAnAnIshreee, from the jAnAnIshreee/Just-Dance- repository on GitHub. It is a 2-layer board of 103.5 × 35.7 mm with 40 parts on 68 nets, routed with 442 tracks and 36 vias.
It is built around the TM4C123GH6PMIR, ABM3-16.000MHZ-B2-T and ESP8266-12E. Its parts include 15 capacitors, 5 resistors, 2 diodes, 2 connectors and 1 IC. It belongs with the audio and music boards and the ESP8266 boards of this library.
For 319K/445L Lab 6 or 7, use the marked file. Otherwise use ECE445L_Starter.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | ECE445L:C_Axial_200mil | C3, C6, C7, C9 |
| 3 | ~ | ECE445L:MountingHole_4_40 | H1, H2, H4 |
| 2 | 0.01uF | ECE445L:C_Axial_200mil | C4, C10 |
| 2 | 10k | ECE445L:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3 |
| 2 | 10pF C0G | ECE445L:C_Axial_200mil | C1, C2 |
| 2 | 1uF | ECE445L:C_Axial_200mil | C8, C11 |
| 2 | 220 | ECE445L:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R5 |
| 2 | 4.7uF | ECE445L:CP_Radial_Tantal200mil | C12, C13 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | IMU_TP, J3 |
| 1 | ADAFRUIT_2.5MM | U$9 | |
| 1 | 1X09_ROUND_70 | JP1 | |
| 1 | 1X05_ROUND_70 | JP2 | |
| 1 | 0.1 uf | ECE445L:C_Axial_200mil | C15 |
| 1 | 1M | ECE445L:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 2.2uF | ECE445L:CP_Radial_Tantal200mil | C5 |
| 1 | 4.7 uf | ECE445L:CP_Radial_Tantal200mil | C14 |
| 1 | ABM3-16.000MHZ-B2-T | ECE445L:ABM3 | Y1 |
| 1 | Battery | ECE445L:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | ESP8266-1 | ECE445L:ESP8266_FemaleConnector | UCNT_ESP2 |
| 1 | HBLED | ECE445L:LED_D5.0mm | D1 |
| 1 | JTAG | ECE445L:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LM2937ET-3.3_NOPB | ECE445L:TO254P470X1028X1955-3P | IC2 |
| 1 | LOGO | MyImages:knucklesandpic | G*** |
| 1 | PWRLED | ECE445L:LED_D5.0mm | D2 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | RESET |
| 1 | TM4C123GH6PMIR | ECE445L:QFP50P1200X1200X160-64N | UTM4C1 |
| 1 | TP_BAT | TestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP1 |
| 1 | TP_GND | TestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP2 |

AndrewYin04/VR-Goggles-Embedded-Lab
The typical explanation for the repo structure. Lab specific instructions can be found further below.


DylanMeeks/ece445l-lab7-10
The typical explanation for the repo structure. Lab specific instructions can be found further below.

aidanaalund/ece-445l-final-project
My final mechatronics project from the Spring 2025 Embedded Systems Design Lab course. Taught by Dr. Jonathan Valvano. Team was Aidan Aalund, Alexa Aguilar Izquierdo, Paul Schnoebelen, Eric Zang, and Brian Ahn.

Andres-Wearden/Lab10
The typical explanation for the repo structure. Lab specific instructions can be found further below.

chengkun-yang/ece-445l-lab-6-chengkun-yang
The typical explanation for the repo structure. Lab specific instructions can be found further below.


Jesus61302/ECE445L-Lab1-jh69848
IMPORTANT (for those not using Github Classroom): To clone this repository, click the green "Use this template" button and create a PRIVATE repository.
It measures 103.5 × 35.7 mm and has 2 copper layers, 1.6 mm thick.
40 parts, built around the TM4C123GH6PMIR, ABM3-16.000MHZ-B2-T and ESP8266-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jAnAnIshreee/Just-Dance- repository on GitHub, at the commit this page was made from: the board is hw/Controller_PCB.kicad_pcb and its schematic hw/Controller_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jAnAnIshreee before reusing the design.