

ECE445L rvp425 fac969 ccl2396 mhb2275
RC Dragsters!
- Size
- 139.4 × 62.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 63
- Pads
- 175
- Tracks, vias
- 371, 23
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 May 2024
- Updated
- 1 May 2024
Overview
ECE445L rvp425 fac969 ccl2396 mhb2275 is an open-source printed circuit board by collebrusco, from the collebrusco/ECE-445L-final-project repository on GitHub. It is a 2-layer board of 139.4 × 62.7 mm with 50 parts on 63 nets, routed with 371 tracks and 23 vias.
It is built around the TM4C123GH6PMIR, ABM3-16.000MHZ-B2-T and IRLD024PBF. Its parts include 19 capacitors, 10 resistors, 7 diodes, 4 connectors and 3 ICs. It belongs with the ESP8266 boards of this library.
Main components
3TM4C123GH6PMIR
LQFP-64(10x10)-40℃~+85℃ 1.08V~3.63V 12bit 256KB 2KB 32 Bit 32KB 43 80MHz ARM Cortex-M4F Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)ABM3-16.000MHZ-B2-T
SMD5032-2P-20℃~+70℃ 16MHz 18pF 40Ω Crystal Oscillator ±20ppm ±50ppm SMD5032-2P Crystals ROHSAbraconCrystalsIRLD024PBF
HVMDIP-4-55℃~+175℃ 1 N-channel 1.3W 140mΩ@4V 18nC@5V 2.5A 2V 360pF 53pF 60V 870pF N-Channel ±10V HVMDIP-4 MOSFETs ROHSVishay IntertechnologyMOSFETs
README
README.mdECE445L Final Lab
Final project for Spring '24 ECE 445L (1st place winner!)
Frank Collebrusco, Rocco Perciavalle, Connor Leu, Sajid Bhuiyan
Remote-controlled drag racing! Players use two controllers to drive the dragsters. The controllers have a throttle and a gear shifter, and the players must time their gear shifts for the optimal power output. The controller software simulates engine operation and the resulting power output. Players are penalized for red-lining, shifting too early or too late. The better driver wins!



Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1.6k | ECE445L:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R7, R8, R9, R10 |
| 4 | 0.01uF | ECE445L:C_Axial_200mil | C3, C8, C11, C18 |
| 3 | 0.1uF | ECE445L:C_Axial_200mil | C2, C7, C10 |
| 2 | 0.1u | ECE445L:C_Axial_200mil | C13, C14 |
| 2 | 10k | ECE445L:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R5 |
| 2 | 10pF C0G | ECE445L:C_Axial_200mil | C4, C5 |
| 2 | 10u | ECE445L:C_Axial_200mil | C12, C15 |
| 2 | 1uF | ECE445L:C_Axial_200mil | C6, C9 |
| 2 | Conn_01x01 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J2, J3 |
| 1 | .1uF | ECE445L:C_Axial_200mil | C19 |
| 1 | 100k | ECE445L:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6 |
| 1 | 100nF | Capacitor_THT:C_Axial_L5.1mm_D3.1mm_P15.00mm_Horizontal | C16 |
| 1 | 1M | ECE445L:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D3 |
| 1 | 2.2uF | ECE445L:CP_Radial_Tantal200mil | C1 |
| 1 | 3.3k | ECE445L:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 3V3_LED | ECE445L:LED_D5.0mm | D1 |
| 1 | 4.7uF | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C17 |
| 1 | 5V_LED | ECE445L:LED_D5.0mm | D2 |
| 1 | ABM3-16.000MHZ-B2-T | ECE445L:ABM3 | Y1 |
| 1 | ESP8266-01/ESP-01 | footprints:ai_thinker_ESP8266_01 | U2 |
| 1 | HEARTBEAT | ECE445L:LED_D5.0mm | D4 |
| 1 | IRLD024PBF | ECE445L:DIP920W60P254L490H457Q4N | Q1 |
| 1 | JTAG HEADER | ECE445L:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LM2937xT | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | 5VREG1 |
| 1 | MotorOut | ECE445L:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | ORNGLED | ECE445L:LED_D5.0mm | D6 |
| 1 | REDLED | ECE445L:LED_D5.0mm | D5 |
| 1 | Reset | ECE445L:SW_PUSH_6mm | SW1 |
| 1 | TM4C123GH6PMIR | ECE445L:QFP50P1200X1200X160-64N | IC1 |
| 1 | TP_3V3 | ECE445L:Testpoint_1x02_P2.54mm | TP3 |
| 1 | TP_5V | ECE445L:Testpoint_1x02_P2.54mm | TP2 |
| 1 | TP_BATT | ECE445L:Testpoint_1x02_P2.54mm | TP1 |
| 1 | YLWLED | ECE445L:LED_D5.0mm | D7 |
More from collebrusco/ECE-445L-final-project
1- 2 layers137.4 × 101 mm

Similar boards
- 2 layers114.4 × 88.9 mm

ECE445L Lab7
aidanaalund/ece-445l-final-project
My final mechatronics project from the Spring 2025 Embedded Systems Design Lab course. Taught by Dr. Jonathan Valvano. Team was Aidan Aalund, Alexa Aguilar Izquierdo, Paul Schnoebelen, Eric Zang, and Brian Ahn.
56 parts - 2 layers150 × 90 mm

ECE445L Lab7Restart
Andres-Wearden/Lab10
The typical explanation for the repo structure. Lab specific instructions can be found further below.
87 parts - 2 layers132 × 78 mm

ECE445L Lab7
AndrewYin04/VR-Goggles-Embedded-Lab
The typical explanation for the repo structure. Lab specific instructions can be found further below.
124 parts - 2 layers134 × 58.5 mm

ECE445L Lab6
chengkun-yang/ece-445l-lab-6-chengkun-yang
The typical explanation for the repo structure. Lab specific instructions can be found further below.
48 parts - 2 layers103.5 × 35.7 mm

Controller PCB
jAnAnIshreee/Just-Dance-
A from-scratch reimagining of the Wii game "Just Dance": custom motion controller hardware (TM4C ARM Cortex-M4, SPI IMU, DAC audio) running on-device ML for real-time dance recognition, with MQTT syncing multiple…
40 parts - 2 layers114.4 × 88.9 mm

Lab6
Jesus61302/ECE445L-Lab1-jh69848
IMPORTANT (for those not using Github Classroom): To clone this repository, click the green "Use this template" button and create a PRIVATE repository.
32 parts - 2 layers86.4 × 61 mm

Cjh4858 gam3769 project
K0-p/Garfield-Wheel
HID-compliant game controller with embedded button mapping firmware and gyroscope controls
40 parts - 2 layers152 × 110.6 mm

Baseline project
maanavkoladia/DigiPiano
The DigiPiano is a velocity-sensitive digital piano designed using STM32 and ESP32 microcontrollers. It combines advanced sensor technology, high-quality audio playback, and Bluetooth connectivity to deliver a realistic…
44 parts
Questions
How big is the ECE445L rvp425 fac969 ccl2396 mhb2275 PCB?
It measures 139.4 × 62.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ECE445L rvp425 fac969 ccl2396 mhb2275 use?
50 parts, built around the TM4C123GH6PMIR, ABM3-16.000MHZ-B2-T and IRLD024PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ECE445L rvp425 fac969 ccl2396 mhb2275 KiCad files?
From the collebrusco/ECE-445L-final-project repository on GitHub, at the commit this page was made from: the board is hw/baseline_project/CAR BOARD/ECE445L_rvp425_fac969_ccl2396_mhb2275.kicad_pcb and its schematic hw/baseline_project/CAR BOARD/ECE445L_rvp425_fac969_ccl2396_mhb2275.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ECE445L rvp425 fac969 ccl2396 mhb2275 design in my own project?
Its repository states no licence, so its author keeps all rights: ask collebrusco before reusing the design.