Skip to the content
4 layers40.6 × 49.3 mmLedkiv4, the printed circuit board in 3D

A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

Size
40.6 × 49.3 mm
Copper layers
4
Thickness
1.6 mm
Parts
125
Nets
70
Pads
355
Tracks, vias
1,475, 231
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
11 Oct 2025
Updated
18 Oct 2026

Overview

Ledkiv4 is an open-source printed circuit board by JamPsym, from the JamPsym/letki repository on GitHub. It is a 4-layer board of 40.6 × 49.3 mm with 125 parts on 70 nets, routed with 1,475 tracks and 231 vias.

It is built around the CH32V003F4P6, ME6206A33M3G and TPS2553DBVR-1, with the XL-2012UOC, BSS138BK and CC0603KRX7R9BB104 among its other parts. Its parts include 64 diodes, 30 resistors, 8 transistors, 7 capacitors and 6 ICs. It belongs with the RISC-V boards of this library.

Main components

10

README

archive/hw/ledkiv3.1-checked-34R-20261015/README.md

Letki v3.1 — checked prototype tile

A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no synchronized PCB yet.

Open ledkiv3_1.kicad_pro. This is the completed Study C tile promoted into the main repository on 2026-10-15. The original seed, electrical studies, archived v3 and initial unrouted integration are preserved. ESP-12F and the custom power head are explicitly deferred until hardware verification.

The tile retains stocked CH32V003F4P6 and SN74HC138PWR, with eight AO3415A column sources and eight DMN2056U-7 row sinks. Each row has two 68Ω resistors in parallel (34Ω). Supply is externally regulated 3.3V ±5%. All LEDs reverse relative to v3. Use make VARIANT=v3_1-pulse; original v3 and repetitive MOSFET-study firmware are incompatible. make v3_1-interface-demos builds separate communication images that hold LED rows LOW.

The 40.64×49.27mm four-layer board is fully routed. Native ERC/DRC/open nets/ schematic parity/ignored checks are zero. Independent checks cover 369 retained core pins, 390 pads, ordinary tented vias, power geometry, fastener clearance and assembly markings. In1 crossovers are individually whitelisted; the ground plane remains connected. This establishes CAD intent, not pulse/current, thermal, optical, supply or production qualification.

Contacts are symmetric ordinary PTH wire holes: top-to-bottom 3V3/3V3/SDA/ SCL/UART/GND/GND. RX is on the left, TX on the right. Enable JP1/JP2 and fit R11/R12 on only one selected I²C pull-up tile. Rear PicoBlade 53047-0310 and bare pads share J2: 1 REF3V3, 2 SWIO, 3 GND. The current LinkE cable uses only pins2/3 with independent board power.

R4 is on the front at (16.45,27.7), beneath a closed pocket in the matching optical grid. JP2 is on the lower front at (33.5,45.3); remove optics for access. Silk numbers identify resistors, P1/P2 identify jumpers, C1–C5 retain prefixes. Full references remain in CAD/Fab/BOM. Six displaced marks have silk leaders.

First provisioning: leave R49 open and fit R38. Program/readback the matching image, then separately authorize/set/readback PD7 GPIO configuration. Power OFF before fitting R49. Verify debug timer-freeze behavior before powered breakpoint work. Read docs/v3_1-assembly-test.txt from the repository root.

Generate the checked package from the repository root:

sh
PCB_GEOMETRY_PYTHON=/path/to/python-with-pcbnew-and-shapely python3 scripts/v3_1_package.py

Requires KiCad10 CLI/Python, Shapely2, FreeCAD/Pillow host dependencies and WCH GCC configured as documented in docs/arch-setup.md. Current installed geometry Python is in this repository's ignored .tools/kicad-routing-env/. The exporter checks frozen sources and produces exports/prototype/ with Gerbers/drills, schematic, assembly/BOM, matched firmware, populated STEP, printable 1/4-tile mechanics, source/artifact hashes and qualification worksheet. Every physical qualification row remains pending. Confirm actual fabricator preview/process and fresh parts/PCB/assembly prices before an authorized order. No ordering, inventory changes or hardware access occur during packaging.

The existing exports/prototype package is the byte-identical session handoff; its manifest/source ZIP records the original session context. Do not interpret that frozen manifest as hashes of every current main-repository file. See docs/v3_1-handoff.txt and build/hardware/v3_1-migration/ for migration checks. The JLCONE quote currently forces Plugged instead of Tented: fabrication remains on hold until treatment of vias and open solder holes is reconciled.

Repository layout: this directory contains the active KiCad project directly, its project-local libraries/models and exports/. Superseded circuit study CAD is in archive/hw/ledkiv3.1-studies-20261015/. The pulse schematic there remains the checker's immutable electrical reference. General lessons are summarized in /home/pies/electronics/notes/circuits/2026-10-15-led-matrix-drive-studies.txt. See ../../docs/v3_1-handoff.txt for firmware, qualification and sourcing links.

Parts

125
QtyValueFootprintReferences
64XL-2012UOCLetki:LED_0805_2012Metric_LetkiFabD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +48
13100kLetki:R_0603_1608Metric_LetkiFabR15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R28, R29
81.2k 1%Letki:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder_LetkiFabR1, R2, R3, R4, R5, R6, R7, R8
8BSS138BKLetki:SOT-23_LetkiFabQ1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
5100nLetki:C_0603_1608Metric_LetkiFabC1, C3, C6, C7, C10
2100kLetki:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder_LetkiFabR9, R14
22.2kLetki:R_0603_1608Metric_LetkiFabR26, R27
22.2kLetki:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder_LetkiFabR11, R12
24.7u 25V X7RLetki:C_0805_2012Metric_LetkiFabC8, C9
25.1k 1%Letki:R_0603_1608Metric_LetkiFabR30, R31
2HEAD ONLYLetki:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm_LetkiFabJP1, JP2
2M2Letki:MountingHole_2.2mm_M2_LetkiFabH1, H2
2TS-1089S-AR02516Letki:SW_tactile_TS-1089SSW1, SW2
133k 1%Letki:R_0603_1608Metric_LetkiFabR32
153047-0310Letki:Molex_PicoBlade_53047-0310_1x03_P1.25mm_Vertical_SWIO_LetkiFabJ2
174HCT238PW,118Letki:TSSOP-16_4.4x5mm_P0.65mm_LetkiFabU2
1CH32V003F4P6Letki:TSSOP-20_4.4x6.5mm_P0.65mm_LetkiFabU1
1Left ConnLetki:EdgeBridge_1x07_P2.54mmJ3
1ME6206A33M3GLetki:SOT-23_LetkiFabU6
1Right ConnLetki:EdgeBridge_1x07_P2.54mmJ1
1SN74HCT244PWRLetki:TSSOP-20_4.4x6.5mm_P0.65mm_LetkiFabU3
1SN74LVC2G125DCURLetki:VSSOP-8_2.3x2mm_P0.5mm_LetkiFabU4
1TPS2553DBVRLetki:SOT-23-6_LetkiFabU5
1TYPE-C-31-M-12Letki:USB_C_Receptacle_HRO_TYPE-C-31-M-12_HeadJ4

More from JamPsym/letki

8
  • 4 layers40.6 × 49.3 mmLedkiv3 1, the printed circuit board in 3D

    Ledkiv3 1

    JamPsym/letki

    A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

    164 parts
  • 4 layers49.6 × 49.6 mmLedkiv3 2, the printed circuit board in 3D

    Ledkiv3 2

    JamPsym/letki

    A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

    159 parts
  • 4 layers40.6 × 49.3 mmLedkiv3 1, the printed circuit board in 3D

    Ledkiv3 1

    JamPsym/letki

    A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

    154 parts
  • 4 layers40.6 × 49.3 mmLedkiv4 1, the printed circuit board in 3D

    Ledkiv4 1

    JamPsym/letki

    A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

    135 parts
  • 4 layers40.6 × 49.3 mmLedkiv4, the printed circuit board in 3D

    Ledkiv4

    JamPsym/letki

    A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

    135 parts
  • 4 layers40.6 × 44.4 mmLedkiv3 1, the printed circuit board in 3D

    Ledkiv3 1

    JamPsym/letki

    A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

    94 parts
  • 2 layers39 × 41.4 mmLedkiv2, the printed circuit board in 3D

    Ledkiv2

    JamPsym/letki

    A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

    78 parts
  • 2 layers44.7 × 50.8 mmLedki8x8, the printed circuit board in 3D

    Ledki8x8

    JamPsym/letki

    A new schematic simplification is in progress. See the next-iteration note for the checked 33 Ω candidate. This directory and its frozen exports still represent the previous 34 Ω circuit; the candidate has no…

    74 parts

Similar boards

  • 2 layers43.6 × 25.5 mmBikeUSBv2, the printed circuit board in 3D

    BikeUSBv2

    H3wastooshort/BikeUSBv2

    Charge your Phone off of your Bike while adapting charging power to available power / riding speed.

    63 parts1GPL-3.0
  • 4 layers40 × 30 mmPixie device, the printed circuit board in 3D

    Pixie device

    firefly/pixie-device

    Firefly Pixie hardware wallet design, schematics and PCB

    64 parts18
  • 4 layers50 × 60 mmDRV835FSV2, the printed circuit board in 3D

    DRV835FSV2

    kavin-x/Quadruped

    afd

    78 parts1
  • 2 layers53.9 × 62.6 mmMoon light, the printed circuit board in 3D

    Moon light

    HeyPCB/moon-light

    Luna, the night-light moon: A sleepy moon that turns on at dusk and tucks itself in after you fall asleep. KiCad 10, heypcb.ai merch.

    36 parts1CERN-OHL-S-2.0
  • 2 layers50.6 × 62.2 mmAir ghost, the printed circuit board in 3D

    Air ghost

    HeyPCB/air-ghost

    Air Ghost: A little ghost that blushes red when your room needs fresh air. KiCad 10, heypcb.ai merch.

    19 partsCERN-OHL-S-2.0
  • 2 layers80 × 125.3 mmPhone robot, the printed circuit board in 3D

    Phone robot

    HeyPCB/phone-robot

    Bolt, the phone stand robot: A little robot that holds your phone, charges it, and peeks over the top to tell you how it's eating. KiCad 10, heypcb.ai merch.

    35 partsCERN-OHL-S-2.0
  • 2 layers69.6 × 66.4 mmPomodoro pal, the printed circuit board in 3D

    Pomodoro pal

    HeyPCB/pomodoro-pal

    Pomodoro Pal: A tomato on your desk that keeps you focused for 25 minutes, without your phone. KiCad 10, heypcb.ai merch.

    41 partsCERN-OHL-S-2.0
  • 4 layers120 × 50 mmIsolator, the printed circuit board in 3D

    Isolator

    alxgmpr/adum4165-isolator

    73 parts

Questions

How big is the Ledkiv4 PCB?

It measures 40.6 × 49.3 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Ledkiv4 use?

125 parts, built around the CH32V003F4P6, ME6206A33M3G, TPS2553DBVR-1 and XL-2012UOC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ledkiv4 KiCad files?

From the JamPsym/letki repository on GitHub, at the commit this page was made from: the board is archive/hw/ledkiv4-flat-pads-20261012/ledkiv4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ledkiv4 design in my own project?

Its repository states no licence, so its author keeps all rights: ask JamPsym before reusing the design.