Skip to the content
2 layers106.6 × 63.3 mmDigitsbest, the printed circuit board in 3D

A chorded keyboard roughly based on the ginny.

Size
106.6 × 63.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
23
Pads
373
Tracks, vias
303, 1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
3 Dec 2023
Updated
4 Dec 2023

Overview

Digitsbest is an open-source printed circuit board by jamiedsmith95, from the jamiedsmith95/TheDigit repository on GitHub. It is a 2-layer board of 106.6 × 63.3 mm with 26 parts on 23 nets, routed with 303 tracks and 1 via.

README

README.md

TheDigit

A chorded keyboard, roughly based on the ginny, the Digit has 5 keys on each side for a total of 10. Inputs not found directly on the keys are accessed with a mixture of layering and chording.

The Digit

Firmware

Zephyr Mechanical Keyboards or ZMK is an open source firmware for keyboards. Within ZMK are a number of useful functionalities that make such a keyboard usable.

  • Layering
  • Chording
  • Tap-dance
  • Tap-hold
  • Macros

Layers

Layers allow the user to change the function of the keys they have access to as well as the ability to change the chords they have access to. For example, a number layer could change the main 8 keys to the numbers 1 to 8, with 9 and 0 put as an easy to reach chord. Additional layers can then be added for virtually unlimited functionality. Layers can be activated in multiple ways allowing for enhanced customisation.

  1. They can be toggled on or off.
  2. They can be turned momentarily on, this means that the layer is deactivated if the key or chord is released.
  3. They can be turned on while all other layers are deactivated.

Chords

Chords are triggered by pressing two or more keys down at the same time (within a small tolerance). With the available combinations of two keys the user now has more than enough inputs available for the alphabet and the more common punctuation.

Tap-dance

Tap dancing is the name given to the keyboard behaviour that allows the user to have a key (or chord) behave differently depending on how many times it is pressed within a short window. For example, pressing shift once could give you shift and twice for CAPSLOCK.

Tap-hold

Similarly to tap-dance, tap-hold allows the user to trigger different behaviours when they tap a key and when they hold it. For example, pressing ESC for escape and hold it down to activate a layer.

Macros

Macros are one of the features that really speed up typing and allow the user to properly customise the firmware. A macro can be configured to input sequences of keys, whether they form words or are combinations of modifiers that trigger a frequently used shortcut. This allows typing words or even frequently used phrases with a single chord.

The keymap

The keymap is a file that holds all the information specifying these behaviours. The keymap and other ZMK files I use can be found in zmk_keymap.

Parts

26
QtyValueFootprintReferences
10PG1350S1, S2, S3, S4, S5, S6, S7, S8, S9, S10
4LOGOgraphics:newhandG***, G***, G***, G***
3, ,
1lib:bat
1ProMicroMCU1
1Button_Switch_SMD:SW_SPST_B3U-1000P
1Button_Switch_SMD:SW_SPDT_PCM12

The 21 most common of 26 parts.

More from jamiedsmith95/TheDigit

1
  • 2 layers115 × 78.3 mmDigits, the printed circuit board in 3D

    Digits

    jamiedsmith95/TheDigit

    A chorded keyboard roughly based on the ginny.

    19 parts4

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the Digitsbest PCB?

It measures 106.6 × 63.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Digitsbest use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Digitsbest KiCad files?

From the jamiedsmith95/TheDigit repository on GitHub, at the commit this page was made from: the board is pcb/digitsbest-2022-09-03_060027/digitsbest.kicad_pcb and its schematic pcb/digitsbest-2022-09-03_060027/digitsmoved.kicad_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Digitsbest design in my own project?

Its repository states no licence, so its author keeps all rights: ask jamiedsmith95 before reusing the design.