4 layers33.8 × 46 mm
MorphWatch STM32
deebot/MorphWatch-STM32
The Repo contains KiCAD hardware files and software for Morph Watch
64 parts12
4 layers84.4 × 56.1 mm
ScareBanger PCB
JamesM92/ScareBangerPCB for controlling relay baords and workign with octobanger software
- Size
- 84.4 × 56.1 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 27
- Nets
- 47
- Pads
- 144
- Tracks, vias
- 350, 18
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Oct 2022
- Updated
- 11 Feb 2023
Overview
ScareBanger PCB is an open-source printed circuit board by JamesM92, from the JamesM92/ScareBanger repository on GitHub. It is a 4-layer board of 84.4 × 56.1 mm with 27 parts on 47 nets, routed with 350 tracks and 18 vias.
It is built around the DFR0299, GPTS203211B and RJ45. Its parts include 10 connectors, 8 resistors, 3 capacitors, 2 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3README
PCB/readme.md
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R3, R4, R5, R6, R7 |
| 3 | Screw_Terminal_01x06 | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | J3, J6, J7 |
| 2 | 1uF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1, C2 |
| 2 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP1, JP2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
| 1 | 1757271 | SamacSys_Parts:691311500105 | J2 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 470uF 50V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | Arduino_Nano_v3.x | SamacSys_Parts:ARDNANO30NP | A1 |
| 1 | AudioJack2_Ground | custom:PJ-301C HeadPhoneJack | J5 |
| 1 | Barrel_Jack_Switch | custom:Vertical-BarrelJack_54-00287 | J4 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Conn_01x10_Female - SAINSMART CONNECTOR | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J16 |
| 1 | DFR0299 | SamacSys_Parts:DIPS1778W50P254L2100H170Q16N | U1 |
| 1 | GPTS203211B | Button_Switch_THT:SW_PUSH_6mm | S1 |
| 1 | RJ45 | SamacSys_Parts:54602908LF | J1 |
| 1 | SW_SPDT | custom:SpDt SlideSwitch | SW2 |
| 1 | Screw_Terminal_01x10 - HILETGO RLEAY BOARD | custom:PinHeader_1x10_P5.0mm_Horizontal | J17 |
Questions
How big is the ScareBanger PCB PCB?
It measures 84.4 × 56.1 mm and has 4 copper layers, 4.69 mm thick.
What parts does the ScareBanger PCB use?
27 parts, built around the DFR0299, GPTS203211B and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ScareBanger PCB KiCad files?
From the JamesM92/ScareBanger repository on GitHub, at the commit this page was made from: the board is PCB/ScareBanger_PCB.kicad_pcb and its schematic PCB/ScareBanger_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ScareBanger PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask JamesM92 before reusing the design.
Similar boards
- 6 layers209.6 × 139.7 mm
Tdt4295
halworsen/tdt4295-grafikk
Bugge is an embedded system designed from absolute scratch, and is capable of drawing arbitrarily complex 3D wireframe models with VGA output.
170 parts5 - 2 layers84.9 × 68.8 mm
Mouse v2
micromouseuci/micromouse-kit
This is the official GitHub of Micromouse @ UCI. This repository is here to allow you to build your own mouse for competition.
67 parts5 - 2 layers115.7 × 107.6 mm
- 2 layers
- 2 layers84 × 52.5 mm
- 4 layers85 × 85 mm
Pcb version2
constancegdl/RP2350-FI-Attack-PCB
PCB designed for fault injection on the RP2350.
69 parts - 2 layers30 × 80 mm
STM32-DEVLOPMENT BOARD
harshsahu32672/STM32-DEVLOPMENT-BOARD
A fully custom-designed STM32L433CBT6 development board built using KiCad, featuring USB connectivity, debugging support, and optimized PCB layout for embedded applications.
61 partsMIT