deebot/MorphWatch-STM3212The Repo contains KiCAD hardware files and software for Morph Watch
MorphWatch STM32 is an open-source printed circuit board by deebot, from the deebot/MorphWatch-STM32 repository on GitHub. It is a 4-layer board of 33.8 × 46 mm with 64 parts on 52 nets, routed with 690 tracks and 75 vias.
It is built around the JDY-08, TP4054 and ME6211C33M5G-N, with the MPU-6050, MBR0530 and GPTS203211B among its other parts. Its parts include 25 capacitors, 12 resistors, 6 diodes, 5 ICs and 5 connectors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | C | Capacitor_SMD:C_0402_1005Metric | C11, C12, C14, C15, C16, C17, C18, C19, C20, C21, C22, C24 |
| 7 | 1uf/50v | Capacitor_SMD:C_0402_1005Metric | C3, C5, C6, C7, C8, C9, C23 |
| 4 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D2, D3, D4 |
| 4 | R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R7, R8, R9 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R4 |
| 2 | 1uf | Capacitor_SMD:C_0402_1005Metric | C4, C13 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R11 |
| 2 | 4.7uf/50v | Capacitor_SMD:C_0402_1005Metric | C2, C10 |
| 2 | GPTS203211B | watchcomponents:K2-1114SA-A4SW-06 | S1, S2 |
| 1 | TP4054 | Package_TO_SOT_SMD:TSOT-23-5 | U1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5 |
| 1 | 27n | Inductor_SMD:L_1008_2520Metric | L2 |
| 1 | 27uH | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 3 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 4.7uF/50v | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 4.7uf | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 5 | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | CJ2301_S1 | CJ2301_S1:SOT95P240X115-3N | Q1 |
| 1 | Conn_01x02 | watchcomponents:Motor_Header | J4 |
| 1 | Conn_01x04 | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Horizontal | J3 |
| 1 | Conn_01x05 | Connector_PinSocket_2.00mm:PinSocket_1x05_P2.00mm_Vertical | J5 |
| 1 | Conn_01x24 | watchcomponents:24_Pins_0.5mm_Pitch_ZIF_Connector_UP | J2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DMN3042L | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Diode | DiodeU-DFN1608-2:U-DFN1608-2_L1.6-W0.8-RD | D6 |
| 1 | JDY-08 | JDY-08:JDY-08_HandSoldering | U3 |
| 1 | LED | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | D5 |
| 1 | ME6211C33M5G-N | ME6211C33M5G-N:SOT95P270X145-5N | IC1 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U4 |
| 1 | Motor_DC_ALT | watchcomponents:Motor_Header | M1 |
| 1 | S8050 | S8050:SOT95P240X115-3N | Q3 |
| 1 | STM32L476RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SolderJumper_2_Open | Diode_SMD:D_0603_1608Metric | JP1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | USB | USBLCSC:MICRO-USB-SMD_MICROXNJ | J1 |
It measures 33.8 × 46 mm and has 4 copper layers, 1.6 mm thick.
64 parts, built around the JDY-08, TP4054, ME6211C33M5G-N and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the deebot/MorphWatch-STM32 repository on GitHub, at the commit this page was made from: the board is MorphWatch-Hardware/MorphWatch-STM32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask deebot before reusing the design.
Yang-xy-svg/ESP_OpenMic
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
ccadic/The603-200
One of the most strange Vintage Connected Watch project - 192 LED and ESP32
MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".
benlhy/wireless_measurements
A simple, compact wireless tool to measure low power circuits