2 layers78.7 × 72.6 mm
2 layers78.7 × 72.6 mm
AWG for ECE492
- Size
- 78.7 × 72.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 110
- Pads
- 285
- Tracks, vias
- 424, 139
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Feb 2023
- Updated
- 27 Nov 2023
Overview
Awg is an open-source printed circuit board by jamesfs912, from the jamesfs912/AWG repository on GitHub. It is a 2-layer board of 78.7 × 72.6 mm with 79 parts on 110 nets, routed with 424 tracks and 139 vias.
It is built around the LM2904 and S14. Its parts include 30 resistors, 18 capacitors, 7 connectors, 6 ICs and 3 diodes.
Main components
2Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R5, R6, R7, R9, R10, R11, R12, R15, R16, R17, R19, R20, R26, R29 |
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 6 | JP | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP3, JP4, JP5, JP6, JP7, JP8 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C7, C8 |
| 5 | 1K | Resistor_SMD:R_0603_1608Metric | R4, R14, R27, R28, R30 |
| 5 | TestPoint | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 3K3 | Resistor_SMD:R_0603_1608Metric | R3, R8, R13, R18 |
| 4 | LM2904 | Package_TO_SOT_SMD:SOT-23-8_Handsoldering | U1, U2, U3, U4 |
| 2 | 120p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | 4.7u | awg_fp_lib:NRH2410 | L1, L2 |
| 2 | BNC | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J3, J4 |
| 2 | S14 | Diode_SMD:D_SOD-323_HandSoldering | D1, D2 |
| 2 | SJ | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 1 | 02x02 | awg_fp_lib:2x02 | J2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 110k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 1K5 | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 2x01 | awg_fp_lib:1x02 | J5 |
| 1 | DG403 | Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm | U5 |
| 1 | LM4040-5 | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J1 |
| 1 | nuc303_LEFT | Connector_PinHeader_2.54mm:PinHeader_2x19_P2.54mm_Vertical | J6 |
| 1 | nuc303_RIGHT | Connector_PinHeader_2.54mm:PinHeader_2x19_P2.54mm_Vertical | J7 |
| 1 | r1283 | awg_fp_lib:DFN-12 | U6 |
More from jamesfs912/AWG
2- 2 layers44.7 × 42.9 mm
Similar boards
- 2 layers104 × 18.1 mm
Conector pciex4 pcb up alt 2
MateoCignetti/ProyectoFinal
Esta obra está bajo una [Licencia Creative Commons Atribución-NoComercial-CompartirIgual 4.0 Internacional][cc-by-nc-sa].
56 parts2 - 2 layers223.5 × 76 mm
- 2 layers89.1 × 104.6 mm
- 2 layers167.1 × 363.5 mm
- 4 layers60 × 60 mm
WeatherStation
LStranc/WeatherStation
A Wifi Weather Station for personal use at home. Contains Gerber files, microcontroller code, and server code.
84 parts - 2 layers63.5 × 63.5 mm
Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 4 layers100 × 100 mm
DAC ADC PWM IO
DanielMartensson/STM32-PLC
STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, CAN-bus + Alarm etc.
270 parts183MIT - 2 layers133 × 98 mm
Precharge
michaelruppe/FSAE
Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)
121 parts59MIT
Questions
How big is the Awg PCB?
It measures 78.7 × 72.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Awg use?
79 parts, built around the LM2904 and S14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Awg KiCad files?
From the jamesfs912/AWG repository on GitHub, at the commit this page was made from: the board is PCB/PCB_Rev2B/awg.kicad_pcb and its schematic PCB/PCB_Rev1/awg.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Awg design in my own project?
Its repository states no licence, so its author keeps all rights: ask jamesfs912 before reusing the design.