Skip to the content
2 layers95 × 45.2 mmChamberlain banner adapter, the printed circuit board in 3D

Chamberlain banner adapter

jamesbeldock/electronics-projects

Various electronics projects, mostly for home automation. I am not a professional electrical engineer. See Disclaimer :)

Size
95 × 45.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
7
Pads
31
Tracks, vias
43, 2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
8 Feb 2021
Updated
14 Jun 2026

Overview

Chamberlain banner adapter is an open-source printed circuit board by jamesbeldock, from the jamesbeldock/electronics-projects repository on GitHub, published under the MIT licence. It is a 2-layer board of 95 × 45.2 mm with 12 parts on 7 nets, routed with 43 tracks and 2 vias.

Its parts include 3 switches, 2 diodes and 2 connectors. It belongs with the interfaces and adapters boards of this library.

README

README.md

Electronics Projects

Various electronics projects, mostly for home automation. I am not a professional electrical engineer. See Disclaimer :)

LED Control Board XC-0001 Rev 2

Originally designed to power 12V lighted house numerals from Luxello and constant-current LEDs using an off-board part. pcb_hero

3d_hero

Disclaimer

This repository contains electronics designs, schematics, board layouts, firmware, and related materials (the "Materials") provided for educational and informational purposes only. The Materials are distributed under the MIT License (see LICENSE).

No warranty. The Materials are provided "AS IS", without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose, correctness, and non-infringement. No representation is made that any design is safe, functional, complete, accurate, or suitable for any purpose. Assumption of risk. Working with electronics involves inherent risks, including but not limited to electric shock, fire, burns, exposure to hazardous materials, damage to property, and bodily injury or death — particularly where mains voltage, lithium chemistries, high currents, RF emissions, or stored energy (capacitors, inductors) are involved. You assume all risk arising from any use, construction, modification, or operation of the Materials.

No liability. In no event shall the author(s) or copyright holder(s) be liable for any claim, damages, or other liability — whether in an action of contract, tort (including negligence), or otherwise — arising from, out of, or in connection with the Materials or their use, including any direct, indirect, incidental, special, exemplary, consequential, or punitive damages, regardless of the theory of liability and even if advised of the possibility of such damages.

Your responsibility. You are solely responsible for verifying every design before use; for ensuring compliance with all applicable codes, standards, and regulations (including but not limited to electrical, building, fire, and RF/EMC regulations such as those of the FCC, IEC, UL, and CE); for obtaining any required certifications or inspections; and for the safe construction, testing, and operation of anything derived from the Materials. Designs are not certified, have not necessarily been tested, and may contain errors, omissions, or latent defects.

Not professional advice. Nothing herein constitutes engineering, legal, or safety advice. Consult a qualified licensed professional before relying on any design.

Parts

12
QtyValueFootprintReferences
5TestPointTestPoint:TestPoint_Pad_D2.0mmTP1, TP2, TP3, TP4, TP5
3SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx43SMTRSW1, SW2, SW3
21N914Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2
2Conn_01x05_SocketTerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01605HBWC_1x05_P5.08mm_HorizontalJ1, J2

More from jamesbeldock/electronics-projects

2
  • 2 layers146.1 × 71 mmXC-0001-Gate LEDs, the printed circuit board in 3D

    XC-0001-Gate LEDs

    jamesbeldock/electronics-projects

    Various electronics projects, mostly for home automation. I am not a professional electrical engineer. See Disclaimer :)

    33 partsMIT
  • 2 layers76 × 60 mmXC-0001-Gate LEDs, the printed circuit board in 3D

    XC-0001-Gate LEDs

    jamesbeldock/electronics-projects

    Various electronics projects, mostly for home automation. I am not a professional electrical engineer. See Disclaimer :)

    16 partsMIT

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Chamberlain banner adapter PCB?

It measures 95 × 45.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Chamberlain banner adapter use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Chamberlain banner adapter KiCad files?

From the jamesbeldock/electronics-projects repository on GitHub, at the commit this page was made from: the board is Electronics/XC-0002-Chamberlain-Banner-Adapter/chamberlain-banner-adapter.kicad_pcb and its schematic Electronics/XC-0001-Gate_LEDs Rev 2/LineVoltage.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Chamberlain banner adapter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).