
XC-0001-Gate LEDs
jamesbeldock/electronics-projects
Various electronics projects, mostly for home automation. I am not a professional electrical engineer. See Disclaimer :)

Various electronics projects, mostly for home automation. I am not a professional electrical engineer. See Disclaimer :)
XC-0001-Gate LEDs is an open-source printed circuit board by jamesbeldock, from the jamesbeldock/electronics-projects repository on GitHub, published under the MIT licence. It is a 2-layer board of 146.1 × 71 mm with 33 parts on 17 nets, routed with 98 tracks and 1 via.
It is built around the RAC01-12SGB, LDU1416S1000 and TXD2-12V-3. Its parts include 15 connectors, 3 capacitors, 2 ICs, 1 switch and 1 inductor.
Various electronics projects, mostly for home automation. I am not a professional electrical engineer. See Disclaimer :)
XC-0001 Rev 2Originally designed to power 12V lighted house numerals from Luxello and constant-current LEDs using an off-board part.
This repository contains electronics designs, schematics, board layouts, firmware, and related materials (the "Materials") provided for educational and informational purposes only. The Materials are distributed under the MIT License (see LICENSE).
No warranty. The Materials are provided "AS IS", without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose, correctness, and non-infringement. No representation is made that any design is safe, functional, complete, accurate, or suitable for any purpose. Assumption of risk. Working with electronics involves inherent risks, including but not limited to electric shock, fire, burns, exposure to hazardous materials, damage to property, and bodily injury or death — particularly where mains voltage, lithium chemistries, high currents, RF emissions, or stored energy (capacitors, inductors) are involved. You assume all risk arising from any use, construction, modification, or operation of the Materials.
No liability. In no event shall the author(s) or copyright holder(s) be liable for any claim, damages, or other liability — whether in an action of contract, tort (including negligence), or otherwise — arising from, out of, or in connection with the Materials or their use, including any direct, indirect, incidental, special, exemplary, consequential, or punitive damages, regardless of the theory of liability and even if advised of the possibility of such damages.
Your responsibility. You are solely responsible for verifying every design before use; for ensuring compliance with all applicable codes, standards, and regulations (including but not limited to electrical, building, fire, and RF/EMC regulations such as those of the FCC, IEC, UL, and CE); for obtaining any required certifications or inspections; and for the safe construction, testing, and operation of anything derived from the Materials. Designs are not certified, have not necessarily been tested, and may contain errors, omissions, or latent defects.
Not professional advice. Nothing herein constitutes engineering, legal, or safety advice. Consult a qualified licensed professional before relying on any design.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 1 | 10µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 22µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 4.8µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 68µH | Inductor_THT:L_Radial_D9.5mm_P5.00mm_Fastron_07HVP | L1 |
| 1 | AC_IN | XC-footprint-lib:6160.0015 C8 Inlet (panel mount, PCB pins) | J5 |
| 1 | AC_OUT | Connector_Wire:SolderWire-2sqmm_1x02_P7.8mm_D2mm_OD3.9mm_Relief | J6 |
| 1 | AC_Test | XC-footprint-lib:Test Holes | J9 |
| 1 | DC12V_IN | Connector_Wire:SolderWire-1.5sqmm_1x02_P7.8mm_D1.7mm_OD3.9mm | J1 |
| 1 | DC12V_Test | XC-footprint-lib:Test Holes | J8 |
| 1 | Day_Dim | Potentiometer_THT:Potentiometer_Piher_PC-16_Single_Horizontal | RV2 |
| 1 | Dim_Select | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Driver_Ext | XC-footprint-lib:SolderWire-1.5sqmm_1x06_Grouped2x3_P6mm_D1.7mm_OD3mm | J2 |
| 1 | LDU1416S1000 | XC-footprint-lib:LDU1416S1000 | U1 |
| 1 | LED_DIM | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J3 |
| 1 | LED_Dim_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | LED_NoDim | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J4 |
| 1 | LED_NoDim_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Main PCB V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | Night_Dim | Potentiometer_THT:Potentiometer_Piher_PC-16_Single_Horizontal | RV1 |
| 1 | Photocell | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J10 |
| 1 | Photocell_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | Pot PCB H | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | RAC01-12SGB | Converter_ACDC:Converter_ACDC_RECOM_RAC01-xxSGB_THT | PS1 |
| 1 | SW_SPST_LED | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_3-G-5,08_1x03_P5.08mm_Vertical | SW1 |
| 1 | TXD2-12V | XC-footprint-lib:TXD2-12V | U2 |

jamesbeldock/electronics-projects
Various electronics projects, mostly for home automation. I am not a professional electrical engineer. See Disclaimer :)

jamesbeldock/electronics-projects
Various electronics projects, mostly for home automation. I am not a professional electrical engineer. See Disclaimer :)

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository

It measures 146.1 × 71 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the RAC01-12SGB, LDU1416S1000 and TXD2-12V-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jamesbeldock/electronics-projects repository on GitHub, at the commit this page was made from: the board is Electronics/XC-0001-Gate_LEDs Rev 3/XC-0001-Gate_LEDs.kicad_pcb and its schematic Electronics/XC-0001-Gate_LEDs Rev 2/LineVoltage.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).