4 layers100 × 83 mm
Module17-Mainboard
M17-Project/Module_17
M17 modem board for 9600-baud capable radios
209 parts129CERN-OHL-W-2.0
2 layers51.8 × 71.7 mm
Altera Vector adapter V2
james10952001/FPGA-mini-vector-arcade4Vector game daughter board for the Altera EP2C5T144 Cyclone II "mini board"
- Size
- 51.8 × 71.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 104
- Pads
- 355
- Tracks, vias
- 1,114, 62
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 10 Nov 2018
- Updated
- 10 Nov 2018
Overview
Altera Vector adapter V2 is an open-source printed circuit board by james10952001, from the james10952001/FPGA-mini-vector-arcade repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 51.8 × 71.7 mm with 57 parts on 104 nets, routed with 1,114 tracks and 62 vias.
It is built around the TL082, LM4991MA and 24C16, with the CIC10J601NC among its other parts. Its parts include 21 resistors, 18 capacitors, 8 ICs, 6 connectors and 2 inductors. It belongs with the interfaces and adapters boards of this library.
Main components
4
TL082
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 13V/us 2 2.5nA 36V 3MHz 3mV 85dB Short-Circuit Protection SOP-8 FET Input Amplifiers ROHSGcoreOperational Amplifier
LM4991MA
SOIC-8-40℃~+85℃ 0.2% 1-Channel 1.5Wx1@8Ω 2.2V~5.5V 3mA 64dB Automatic mute/no-noise switch、Enable/shutdown function Class AB SOIC-8 Audio Amplifiers ROHSTexas InstrumentsAudio Amplifiers24C16
SOP-8SOP-8 EEPROM ROHSGAOGE MICROCHIPEEPROMCIC10J601NC
-Ferrite BeadsSamsung Electro-Mechanics
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | SM0603 | C2, C3, C4, C5, C6, C11, C14, C15, C18, C19 |
| 4 | 20k | SM0603 | R7, R8, R9, R11 |
| 3 | 10uF | SM0603 | C16, C17, C20 |
| 3 | 50k | Bourns_3362H | R6, R16, R17 |
| 3 | 75R | SM0603 | R1, R2, R3 |
| 2 | 10k | Bourns_3362H | R10, R12 |
| 2 | 2k | SM0603 | R13, R14 |
| 2 | 4.7k | SM0603 | R20, R21 |
| 2 | TL082 | SO8E | U5, U6 |
| 1 | 100uF | SM1206POL | C1 |
| 1 | 10k | SM0603 | R15 |
| 1 | 1k | SM0603 | R19 |
| 1 | 1uF | SM0603 | C9 |
| 1 | 24C16 | SO8E | U8 |
| 1 | 3.3k | SM0603 | R5 |
| 1 | 33k | SM0603 | R18 |
| 1 | 39LF010_PLCC | PLCC32MS | U3 |
| 1 | 4.7n | SM0603 | C7 |
| 1 | 4.7uF | SM0603 | C10 |
| 1 | 470n | SM0603 | C8 |
| 1 | 560R | SM0603 | R4 |
| 1 | 6.8uH | SM0806 | L2 |
| 1 | ADV7123 | LQFP48-M05 | U2 |
| 1 | CIC10J601NC | SM0603 | L1 |
| 1 | CONN_ALTERA_MIN_BRD_128 | Altera_FPGA_mini_brd | J1 |
| 1 | DC_DC_ISA | DC-DC_ISA | U4 |
| 1 | I2C | Header_Friction_Lock-4_Vert | P5 |
| 1 | LM4040 | sot23 | U7 |
| 1 | LM4991 | SO8E | U1 |
| 1 | Monitor | Header_Friction_Lock-6_Vert | P3 |
| 1 | Player 1 | Header_Friction_Lock-10_Vert | P1 |
| 1 | Player 2 | Header_Friction_Lock-10_Vert | P2 |
| 1 | REF | cat_300 | VAL |
| 1 | Speaker | Header_Friction_Lock-2_Vert | P4 |
| 1 | VAL** | Bourns_3362P | 3362P |
Similar boards
- 2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70 - 2 layers104.7 × 55.6 mm
Lab1
jsjolund/dmx512-controller-board
Controller board for DMX512 compatible devices, built around the STM32F4 processor
96 parts26 - 4 layers100 × 80 mm
- 2 layers
- 2 layers65 × 56.5 mm
- 4 layers65 × 56 mm
Radio
hedj/radio
A minimal software-defined radio, based on the GreenArrays GA144A12 microprocessor. Provision is made for connection to a Raspberry Pi B+ and shields.
90 parts2GPL-2.0 - 2 layers49 × 27.5 mm
Questions
How big is the Altera Vector adapter V2 PCB?
It measures 51.8 × 71.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Altera Vector adapter V2 use?
57 parts, built around the TL082, LM4991MA, 24C16 and CIC10J601NC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Altera Vector adapter V2 KiCad files?
From the james10952001/FPGA-mini-vector-arcade repository on GitHub, at the commit this page was made from: the board is Altera Vector adapter V2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Altera Vector adapter V2 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).