Skip to the content
4 layers165 × 119.5 mmEsp32 patch bay circuit, the printed circuit board in 3D

Circuit and PCB for Esp32_patch_bay

Size
165 × 119.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
189
Nets
183
Pads
698
Tracks, vias
1,650, 3
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Jun 2025
Updated
22 Jun 2025

Overview

Esp32 patch bay circuit is an open-source printed circuit board by james-l-key, from the james-l-key/Esp32_patch_bay_circuit repository on GitHub. It is a 4-layer board of 165 × 119.5 mm with 189 parts on 183 nets, routed with 1,650 tracks and 3 vias.

It is built around the ESP32-S3-DEVKITC-1-N8, TL072 and LM2576HVT-5.0, with the MC34063AP, CD4051BE and 74HC595 among its other parts. Its parts include 82 capacitors, 29 resistors, 29 ICs, 20 connectors and 10 switches. It belongs with the ESP32 boards of this library.

Main components

7

README

README.md

ESP32 Patch Bay - Hardware

This repository contains the hardware design files for the ESP32 Patch Bay, a project for dynamically reconfiguring guitar pedal signal chains. The main firmware repository can be found here.

Features

  • Schematic: Designed in KiCad 9.0 (circuit.kicad_sch).
  • 8-Pedal Support: The design supports routing for up to 8 mono guitar pedals.
  • Audio Buffering: Utilizes TL072 op-amps for input and output buffering to maintain signal integrity.
  • Power Isolation: A TMA-1215D DC/DC converter generates isolated ±15V rails for the analog audio circuitry, ensuring low-noise operation.

Hardware

The patch bay is built around the following key components:

  • Microcontroller: ESP32-S3 (e.g., ESP32-S3-WROOM-1 module).
  • Audio Routing:
    • CD4051B 8-channel analog multiplexers.
    • 3x TL072 dual op-amps for buffering.
  • Control:
    • 74HC595 8-bit shift registers to control the multiplexers.
  • Power:
    • The system is powered by a 12V DC input.
    • Onboard regulators provide ±15V, +5V, -5V, and +3.3V for all components.

For a complete list of components, please see the Bill of Materials (BOM) in the docs folder or the HARDWARE.md file.

Power Requirements

  • Input Power: The system uses an external 24V DC power supply.
  • Isolated Dual Rails (±15V): Supplied by an LM7815 (+15V) and an inverting MC34063AP (-15V)
  • Regulated Rails: Onboard linear regulators provide stable +5V, -5V, and +3.3V is supplied by the ESP32-s3-Devkit-C for the digital components and ESP32-S3.

License

This project is licensed under the MIT License. See the LICENSE file for details.

Parts

189
QtyValueFootprintReferences
560.1uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C201, C206, C319, C320, C321, C322 +40
2510kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR301, R302, R303, R304, R305, R306, R307, R308, R309, R310, R311, R312, R313, R314, R315, R316 +9
211uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC202, C205, C301, C302, C303, C304, C305, C306, C307, C308, C309, C310, C311, C312, C313, C314 +5
9CD4051BPackage_DIP:DIP-16_W7.62mmU402, U501, U502, U503, U504, U601, U602, U603, U604
9TL072Package_DIP:DIP-8_W7.62mmU301, U302, U303, U304, U305, U306, U307, U308, U309
8600R@100MhzWE-UKW:WE-UKW_74275010L301, L302, L303, L304, L501, L502, L601, L602
574HC595Package_DIP:DIP-16_W7.62mmU701, U702, U703, U704, U901
3100uF 50vCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC204, C209, C211
21N5822Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD201, D202
11.5Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR201
1100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR101
111kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR203
1150uHInductor_THT:L_Radial_D10.0mm_P5.00mm_Fastron_07ML201
11N5819Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD203
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR202
1220uF 16vCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC208
1220uHInductor_THT:L_Radial_D10.0mm_P5.00mm_Fastron_07ML202
1470pFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC210
1500Potentiometer_THT:Potentiometer_Bourns_3339P_VerticalRV101
1ADG419BNPackage_DIP:DIP-8_W7.62mmU401
1Amp_OutLibrary:JackJ318
1Barrel_JackConnector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal_CircularHolesJ201
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ801
1ESP32-S3-DevKitCESP:ESP32-S3-DevKitCU101
1FX_R_1Library:JackJ301
1FX_R_2Library:JackJ302
1FX_R_3Library:JackJ303
1FX_R_4Library:JackJ304
1FX_R_5Library:JackJ305
1FX_R_6Library:JackJ306
1FX_R_7Library:JackJ307
1FX_R_8Library:JackJ308
1FX_S_1Library:JackJ309
1FX_S_2Library:JackJ310
1FX_S_3Library:JackJ311
1FX_S_4Library:JackJ312
1FX_S_5Library:JackJ313
1FX_S_6Library:JackJ314
1FX_S_7Library:JackJ315
1FX_S_8Library:JackJ316
1Guitar_InLibrary:JackJ317
1Jumper_3_OpenConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJP101
1LED_PWRConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalD101
1LM2576HVT-5Package_TO_SOT_THT:TO-220-5_VerticalU205
1LM7815_TO220Package_TO_SOT_THT:TO-220-3_VerticalU202
1LM7905_TO220Package_TO_SOT_THT:TO-220-3_VerticalU203
1MC34063APPackage_DIP:DIP-8_W7.62mmU201
1NetTie_2NetTie:NetTie-2_THT_Pad1.0mmNT101
1Pedal_1Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW101
1Pedal_2Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW103
1Pedal_3Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW105
1Pedal_4Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW107
1Pedal_5Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW109
1Pedal_6Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW102
1Pedal_7Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW104
1Pedal_8Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW106
1Polyfuse_SmallFuse:Fuse_Bourns_MF-RG500F201
1PresetConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW110
1ProgramConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW108
1~Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalDisp101

Similar boards

  • 2 layers98 × 57 mmPC driver, the printed circuit board in 3D

    PC driver

    Open-2-Photon-Microscope/pockel-cell-controller

    An open source electronic circuit to drive pockel cells.

    28 parts2GPL-3.0
  • 4 layers100 × 100 mmTouchSynth, the printed circuit board in 3D

    TouchSynth

    cpldcpu/TouchSynth

    Analog Monophonic Synthesizer with a touch keyboard. Controller by CH32V00x

    246 partsMIT
  • 2 layers201.3 × 152.1 mmDC DC CONVERTER, the printed circuit board in 3D

    DC DC CONVERTER

    William-Souza-Santos/ADAPTIVE_FUZZY_LOGIC_CONTROL_FOUR_SWITCH_BIDIRECTIONAL_BUCK_BOOST_DC_DC_CONVERTER

    Final Year Project by Electronic Engineering

    95 parts6
  • 4 layers45.7 × 88.9 mmTermostat pcb, the printed circuit board in 3D

    Termostat pcb

    jmX86/TempSync-hardware

    Električne sheme i software za termostat

    95 parts
  • 2 layers110 × 103.3 mmVoiture, the printed circuit board in 3D

    Voiture

    KimotoHoitsu/Voiture-guidee-par-main

    Ce projet consiste à développer une voiture télécommandée via un contrôleur personnalisé utilisant la communication Bluetooth Low Energy (BLE) et un accéléromètre ADXL.

    74 parts
  • 2 layers85 × 55 mmBadge, the printed circuit board in 3D

    Badge

    cookiemonsternz/fallout-badge

    A badge with holes for mounting to a lanyard, containing within a full miniature analogue synthesizer / sequencer.

    50 parts
  • 4 layers240 × 70 mmNixie, the printed circuit board in 3D

    Nixie

    Synthron/Nixie

    A Nixie Clock with Z5600M and ESP32

    324 parts1

Questions

How big is the Esp32 patch bay circuit PCB?

It measures 165 × 119.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Esp32 patch bay circuit use?

189 parts, built around the ESP32-S3-DEVKITC-1-N8, TL072, LM2576HVT-5.0 and MC34063AP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32 patch bay circuit KiCad files?

From the james-l-key/Esp32_patch_bay_circuit repository on GitHub, at the commit this page was made from: the board is circuit.kicad_pcb and its schematic Adafruit PCA9685 rev C.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32 patch bay circuit design in my own project?

Its repository states no licence, so its author keeps all rights: ask james-l-key before reusing the design.