

DC Electronic Load
Digitally controlled dc electronic load.
- Size
- 160 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 60
- Pads
- 249
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Jul 2023
- Updated
- 13 Jul 2023
Overview
DC Electronic Load is an open-source printed circuit board by Jajaho, from the Jajaho/DC-Electronic-Load repository on GitHub. It is a 2-layer board of 160 × 100 mm with 88 parts on 60 nets.
It is built around the OPA196ID, AD8628AR and LM393D, with the SN74AHC08D and IRFP240 among its other parts. Its parts include 48 resistors, 15 capacitors, 15 transistors, 8 ICs and 1 diode. It belongs with the power boards of this library.
Main components
5OPA196ID
SOIC-8-18V~-2.25V、2.25V~18V -40℃~+125℃ 1 100uV 140dB 140uA 15nV/√Hz@1kHz 2.5MHz 20pA 4.5V~36V 500nV/℃ 5pA 65mA 7.5V/us EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierAD8628AR
SOIC-8-40℃~+125℃ 140dB 1V/us 1uV 2.5MHz 2.7V~5V 22nV/√Hz@1kHz 2nV/℃ 30mA 30pA 50pA Rail-to-Rail Input, Rail-to-Rail Output Single-channel Zero drift / auto-zero、Overvoltage Protection、Reverse-phase input protection SOIC-8 Precision Op Amps ROHSAnalog DevicesPrecision Op AmpsLM393D
SOIC-8-18V~-1V、1V~18V 0℃~+70℃ 1.3us 2 25nA 2V~36V 300ns 36V 400uA 5mV 5nA ESD protection TTL、CMOS SOIC-8 Comparators ROHSonsemiComparatorsSN74AHC08D
SOIC-14-40℃~+125℃ 1.5V~3.85V 1.9V、2.9V、4.4V 100mV、500mV 2 2V~5.5V 2uA 4 500mV~1.65V 7.9ns@5V,50pF 74AHC Series 8mA 8mA AND Gate SOIC-14 Logic Gates ROHSTexas InstrumentsLogic GatesIRFP240
TO-247MOSFETsMinos
README
README.mdDC-Electronic-Load
Digitally controlled dc electronic load.
To cut costs, the core idea is to use multiple smaller low-cost MOSFETs in parallel instead of a single higher-power device. Since the current through a semiconductor has a positive temperature coefficient this presents a novel engineering challenge. An unsuitable design could risk a thermal runaway event where a single transistor would handle increasingly larger currents until failure. To prevent such a catastrophic event a circuit to ensure equal current distribution is implemented.
The instrument should feature constant current, voltage and power modes. Over-voltage and current protection is also desired.
This project was initially started in Eagle ECAD on 28.05.2019 but was never implemented.
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | DC Electronic Load:R1206 | R1, R2, R3, R11, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R30, R31 +4 | |
| 9 | 1R | DC Electronic Load:VTA53 | R7, R8, R9, R10, R42, R45, R46, R47, R48 |
| 9 | IRFP240 | DC Electronic Load:TO247BV | Q1, Q2, Q3, Q4, Q10, Q12, Q13, Q14, Q15 |
| 6 | NPN | DC Electronic Load:SOT23 | Q5, Q6, Q7, Q8, Q9, Q11 |
| 5 | 100R | DC Electronic Load:R1206 | R38, R39, R40, R41, R44 |
| 5 | 100n | DC Electronic Load:C1206 | C4, C5, C6, C8, C9 |
| 5 | 10k | DC Electronic Load:R1206 | R26, R27, R28, R29, R33 |
| 5 | 10nF | DC Electronic Load:C1206 | C11, C12, C13, C14, C15 |
| 5 | 2K2 | DC Electronic Load:R1206 | R12, R13, R14, R15, R43 |
| 4 | DC Electronic Load:C1206 | C1, C2, C3, C10 | |
| 3 | OPA196 | DC Electronic Load:SOIC-8 | U3, U5, U6 |
| 2 | 3k | DC Electronic Load:R1206 | R32, R35 |
| 2 | AD8628 | DC Electronic Load:SOIC-8 | U1, U2 |
| 1 | DC Electronic Load:RTRIM64W | R36 | |
| 1 | 1M | DC Electronic Load:R1206 | R34 |
| 1 | 1N4001 | DC Electronic Load:MELF-MLL41 | D3 |
| 1 | 1oon | DC Electronic Load:C1206 | C7 |
| 1 | AZ8-FORM-C | DC Electronic Load:AZ8 | K1 |
| 1 | LM393D | DC Electronic Load:SO08 | IC1 |
| 1 | SN74AHC08 | DC Electronic Load:SOIC−14 | U4 |
| 1 | TL072D | DC Electronic Load:SO08 | IC2 |
Similar boards
- 4 layers129 × 104.6 mm

- 2 layers84.5 × 82.6 mm

- 2 layers81.5 × 60.6 mm

- 2 layers113.5 × 152.5 mm

- 2 layers100.6 × 66.6 mm

- 2 layers

IR2110
M-K-O-Hybrid-open-source/BUCK_manual_Process
the main aim of this design is the ease of the manual manufacturing process of this PCB and the availability of the component
43 parts - 4 layers29 × 20.9 mm

Wideband controller
mck1117/wideband
The firmware/boards directory contains configuration for each board this firmware supports.
60 parts81MIT - 4 layers29 × 20.9 mm

Questions
How big is the DC Electronic Load PCB?
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DC Electronic Load use?
88 parts, built around the OPA196ID, AD8628AR, LM393D and SN74AHC08D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DC Electronic Load KiCad files?
From the Jajaho/DC-Electronic-Load repository on GitHub, at the commit this page was made from: the board is src/kicad/DC Electronic Load.kicad_pcb and its schematic src/kicad/DC Electronic Load.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DC Electronic Load design in my own project?
Its repository states no licence, so its author keeps all rights: ask Jajaho before reusing the design.