

Inverter IPM
Graduation Project making Battery Electric Vehicle. Dept. of Electrical and Computer Engineering at SNU.
- Size
- 197.7 × 187.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 144
- Nets
- 167
- Pads
- 562
- Tracks, vias
- 975, 160
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Feb 2021
- Updated
- 20 Aug 2021
Overview
Inverter IPM is an open-source printed circuit board by jaeyeon302, from the jaeyeon302/2021BEV repository on GitHub. It is a 2-layer board of 197.7 × 187.7 mm with 144 parts on 167 nets, routed with 975 tracks and 160 vias.
It is built around the PDQE10-Q48-S5-D, LM358 and TPS54560BDDA, with the TLP2748(TP,E, SMAZ22-TP and 100UF/16V among its other parts. Its parts include 64 capacitors, 39 resistors, 18 ICs, 13 connectors and 5 diodes. It belongs with the power boards of this library.
Main components
8PDQE10-Q48-S5-D
DIP-5DIP-5 Isolated Power Modules ROHSCUIIsolated Power ModulesLM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierTPS54560BDDA
ESOP-8-40℃~+150℃@(TJ) 1 146uA 4.5V~60V 500kHz 5A 800mV~58.8V Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTLP2748(TP,E
SOP-6-40℃~+110℃ 1 1.55V 1.6mA 100mW 10mA 120ns 120ns 30kV/us 4.5V~30V 50mA 5V 5kV DC SOP-6 Logic Output Optoisolators ROHSToshibaLogic Output OptoisolatorsSMAZ22-TP
SMAUncategorisedTECH PUBLIC100UF/16V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorisedADJH21012
插件-40℃~+85℃ 1 Set Normally Open: 1A (SPST NO) 12V 20ms 20ms 480V@AC 50A AgSnO2 Single Coil 插件 Magnetic Latching Relays ROHSPanasonicMagnetic Latching RelaysEG2219
插件-20℃~+70℃ 15V 500mA DPDT PC Pin Rectangular Columnar Through Hole 插件 Slide Switches ROHSE-SwitchSlide Switches
README
README.md2021BEV
2021 Bachelor's degree Graduation Project, Battery Electric Vehicle
Department of Electrical and Conputer Engineering, Seoul National University
- Advisor : Professor Seung-ki Sul
Demo Video
Test driving 1 : Seoul National University Campus Road (youtube video)
- Path length : 4.06Km
- Maximum slope : 7%
- Maximum speed : 30.5km/h
Test driving 2 : Cooling Performance test (youtube video)
- place : Seoul National University Electric Power Research Institute Parking Lot
- settled down at 44 celcius degree
- continuous maximum q-axis current (30A)
What I made
Inverter
- 4 layer PCB artwork (1oz 2oz 2oz 1oz)
- Used IPM(NFAL5065L4B) as the power IGBT switch
- Electrically isolated control board area from the High Power Area including IPM and DC link
DSP - controller
- TMS320F2839D Launchpad
- Built the q-axis current regulator(PI controller with feedforward) from the scratch including resgister setting(ePWM, eCAP, GPIO, Clock, Timer)
- Implemented rotor position and speed observer to estimate right position of rotor for DQ transformation and feedforward control
Future work
- Robust control algorithm to prevent sudden current peak from the disturbance.
Since there is no mechanical damper between ground and motor wheel, Bumpy road surface directly affects the controller's performance - Hall sensor type curernt sensor removal. because the IPM already provides extra ports to measure the phase current using small register.
Photos
Parts
144| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16, C18, C19, C20, C21, C23, C25, C27, C28, C29, C30, C32, C34, C36, C40, C43 +4 |
| 15 | 1nF/2KV | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C5, C17, C24, C33, C37, C38, C41, C44, C47, C48, C51, C53, C56, C61 |
| 13 | 1k | Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R8, R9, R10, R12, R13, R14, R19, R34, R35, R36, R37, R38, R39 |
| 7 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R11, R15, R17, R20, R22, R23 |
| 7 | TLP2748 | Package_SO:SO-6L_10x3.84mm_P1.27mm | U6, U7, U8, U10, U11, U12, U13 |
| 5 | 10uF/100V | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C22, C31, C35, C57, C60 |
| 4 | 10uF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C49, C62, C64 |
| 4 | 12k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R25, R26, R29, R30 |
| 4 | 24k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R24, R27, R28, R31 |
| 4 | SMAZ22-TP | Diode_SMD:D_SMA_Handsoldering | D2, D3, D4, D5 |
| 3 | 2.2pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C46, C50, C55 |
| 3 | 2.2uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C12, C13, C14 |
| 3 | SMA | Connector_Coaxial:SMA_Amphenol_132203-12_Horizontal | J6, J8, J9 |
| 3 | wcs1800 | j_current_sensor:wcs1x00-xxxx | U15, U17, U18 |
| 2 | 100uF/100V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C26, C42 |
| 2 | 100uF/16V | Capacitor_Tantalum_SMD:CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C7, C8 |
| 2 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C59 |
| 2 | 330uF/100V | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C2, C58 |
| 2 | 4.7uH | Inductor_SMD:L_Taiyo-Yuden_NR-50xx | L1, L3 |
| 2 | BR-1300C-6P | j_terminal:BR-1300C-6P | J2, J3 |
| 2 | LM358 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U14, U16 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C45 |
| 1 | 12.1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 15uH, Irms>5A | Inductor_SMD:L_Vishay_IHLP-6767 | L2 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R32 |
| 1 | 1nF/2kV | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C39 |
| 1 | 2.2mF | Capacitor_THT:CP_Radial_D30.0mm_P10.00mm_SnapIn | C6 |
| 1 | 205k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 215k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 24 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 249 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 44.2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 442k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_8x11.9 | C11 |
| 1 | 5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 68k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R33 |
| 1 | 750pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 1 | 8.2pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10 |
| 1 | 90.9k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R2 |
| 1 | ADJH21012 | j_power_switch:Panasonic-ADJH21012-MFG | K1 |
| 1 | EG2219 | j_switch:SW_EG2219 | S1 |
| 1 | HIF3 2X5 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J13 |
| 1 | Hirose_HIF3BA_30PA_2.54DSA | Connector_PinSocket_2.54mm:PinSocket_2x15_P2.54mm_Vertical | J11 |
| 1 | JST8P | Connector_JST:JST_VH_B8P-VH-B_1x08_P3.96mm_Vertical | J7 |
| 1 | LAUNCHXL_F28379D | j_modules:LAUNCHXL_F28379D | U3 |
| 1 | MOLEX01x03 | Connector_Molex:Molex_SPOX_5267-03A_1x03_P2.50mm_Vertical | J4 |
| 1 | MOLEX01x05 | Connector_Molex:Molex_SPOX_5267-05A_1x05_P2.50mm_Vertical | J5 |
| 1 | MOLEX_01X05 | Connector_Molex:Molex_SPOX_5267-05A_1x05_P2.50mm_Vertical | J10 |
| 1 | NFAL5065L4B-New_Library-J_ipm | j_IPM:NFAL5065L4B | U5 |
| 1 | PDQE10-Q48-D15-D | PDQE10:CONV_PDQE10-Q48-D15-D | U9 |
| 1 | PDQE10-Q48-S5-D | PDQE10:CONV_PDQE10-Q48-S5-D | U1 |
| 1 | PinHeader01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | PinHeader01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | SPX1587AT-3.3 | Package_TO_SOT_SMD:TO-263-3_TabPin4 | U2 |
| 1 | TPS54560BDDA | j_regulator_switching:NOPB | U4 |
| 1 | V26PN60 | Package_TO_SOT_SMD:TO-277A | D1 |
Similar boards
- 2 layers63.5 × 99.1 mm

- 2 layers100 × 100 mm

- 4 layers310.8 × 129.6 mm

- 2 layers

- 2 layers28 × 35 mm

Driver
terjeio/PCBLaserMkII
Mechanical and electrical design files for revised version of my PCB Laser exposer
22 parts18 - 2 layers55 × 40 mm

- 8 layers34 × 34 mm

OpenDrone AIO FC F405 HW
phonght32/OpenDrone_HW_AIO_FC_F405
OpenDrone Project - AIO Brushless FC F405.
211 parts53MIT - 4 layers65 × 30 mm

Elec gripette hub and dyn
pollen-robotics/elec_grabette
Set of electronic boards for Grabette/Gripette
122 parts11Apache-2.0
Questions
How big is the Inverter IPM PCB?
It measures 197.7 × 187.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Inverter IPM use?
144 parts, built around the PDQE10-Q48-S5-D, LM358, TPS54560BDDA and TLP2748(TP,E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Inverter IPM KiCad files?
From the jaeyeon302/2021BEV repository on GitHub, at the commit this page was made from: the board is inverter_IPM/inverter_IPM - 2layer/inverter_IPM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Inverter IPM design in my own project?
Its repository states no licence, so its author keeps all rights: ask jaeyeon302 before reusing the design.