2 layers69.1 × 53.8 mm
CybdoDuino
Cybdo/CybdoDuino
I have so many old Arduino-based projects, including a CNC plotter I made with old CD drives (see here), that could do with a refresh.
71 parts2MIT
2 layers55 × 31 mm
BMP clone
jadranm/BMP-cloneblack magic probe clone
- Size
- 55 × 31 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 76
- Pads
- 190
- Tracks, vias
- 386, 69
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Apr 2024
- Updated
- 24 Jul 2024
Overview
BMP clone is an open-source printed circuit board by jadranm, from the jadranm/BMP-clone repository on GitHub. It is a 2-layer board of 55 × 31 mm with 41 parts on 76 nets, routed with 386 tracks and 69 vias.
It is built around the AMS1117-3.3, TXS0108EPW and USBLC6-2P6, with the BC846 among its other parts. Its parts include 14 resistors, 10 capacitors, 4 ICs, 3 diodes and 3 connectors. It belongs with the STM32 boards of this library.
Main components
4
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
BC846
SOT-23-65℃~+150℃ 1 NPN 100mA 110 15nA 250mW 400mV 65V 6V 770MHz NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
README
README.mdBMP-clone
black magic probe clone v1.0
PCB je gotov checkiraj prezentaciju za više informacija
TVZ diplomski elektrotehnika / Elektrotehničke tehnologije
[ET] 2023/2024 2. semestarParts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric | C2, C7, C8, C9, C10 |
| 4 | 390E | Resistor_SMD:R_0805_2012Metric | R8, R9, R10, R11 |
| 4 | TestPoint_Alt | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 18p | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R12 |
| 2 | 22E | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | YELLOW | LED_SMD:LED_1206_3216Metric | D3, D4 |
| 1 | 100E | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 100u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 10M | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1K5 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 330E | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U4 |
| 1 | BC846 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_02x10_Odd_Even | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J1 |
| 1 | GREEN | LED_SMD:LED_1206_3216Metric | LED |
| 1 | Jumper_2_Open | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J3 |
| 1 | RED | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | STM32F103RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U2 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J2 |
Questions
How big is the BMP clone PCB?
It measures 55 × 31 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BMP clone use?
41 parts, built around the AMS1117-3.3, TXS0108EPW, USBLC6-2P6 and BC846. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BMP clone KiCad files?
From the jadranm/BMP-clone repository on GitHub, at the commit this page was made from: the board is bmp clone.kicad_pcb and its schematic bmp clone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BMP clone design in my own project?
Its repository states no licence, so its author keeps all rights: ask jadranm before reusing the design.
Similar boards
- 2 layers52.3 × 64 mm
- 6 layers100 × 90 mm
- 2 layers100 × 100 mm
CYC10 Board
theexperimentgroup/Atlas-FPGA
La placa ATLAS se diseña con el objetivo de crear un multicore basado en SBC (SINGLE BOARD COMPUTER).
68 parts17 - 2 layers99.1 × 99.1 mm
Calypso
teiram/calypso-cyc1000-board
DIY FPGA board based on Trenz Cyc1000 and Raspberry RP2040 MCU
91 parts11GPL-3.0 - 2 layers65 × 56 mm
- 2 layers100 × 60 mm
- 2 layers
