

SBC3.2
A Z80 computer system
- Size
- 127 × 96.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 132
- Pads
- 456
- Tracks, vias
- 1,562, 80
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 1 Aug 2020
- Updated
- 27 Feb 2023
Overview
SBC3.2 is an open-source printed circuit board by jacobtohahn, from the jacobtohahn/ZTO-80 repository on GitHub. It is a 2-layer board of 127 × 96.5 mm with 73 parts on 132 nets, routed with 1,562 tracks and 80 vias.
It is built around the 74HC138, 74HC139D and ULN2803A. Its parts include 24 resistors, 12 capacitors, 11 connectors, 9 ICs and 2 diodes. It belongs with the retro computing and games boards of this library.
Main components
374HC138
SOP-160℃~+70℃ 24ns@5.0V,16pF 2V~6V 3/8 5.2mA 5.2mA 5uA 74HC Decoder Reverse function Single Supply SOP-16 Signal Switches, Multiplexers, Decoders ROHSGRSignal Switches, Multiplexers, Decoders74HC139D
SO-16-40℃~+125℃ 11ns@6.0V,50pF 160uA 2/4 2V~6V 74HC Decoder Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / MultiplexersULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
README
PCB/Modular System/ZTO-80 CPU/README.mdZTO-80 CPU
This is the CPU module for the ZTO-80 Modular System, containing the Z80 CPU, system clock, reset button, address and data buffers, and a header for CPU signals.
Additional Files
- PDF: A subdirectory containing PDF files of the schematic and PCB.
Component Notes
It is recommended to use a CMOS Z80 and 74HCT logic ICs on this board.
While Z80s overclock well, it is recommended that the max clock speed matches the CPU's rated speed.
Use two pin headers as jumpers on this board.
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 10 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R4, R11, R12, R13, R14, R15, R23, R24 |
| 8 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R8, R9, R10, R17, R19, R20, R21 |
| 6 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP4, JP5, JP6 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R16, R18, R22 |
| 4 | MountingHole_3.2mm_M3_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | Mount1, Mount2, Mount3, Mount4 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J10, J11 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R5 |
| 2 | PIOHDR | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J7, J8 |
| 2 | SIOHDR | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6, J9 |
| 1 | 1.8432MHz | Oscillator:Oscillator_DIP-8 | X2 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12 |
| 1 | 28C256 | Package_DIP:DIP-28_W15.24mm | U3 |
| 1 | 5V_IN | BarrelJack:BarrelJack_CUI_PJ-102A_Horizontal | J3 |
| 1 | 74HC138 | Package_DIP:DIP-16_W7.62mm | U9 |
| 1 | 74HC139 | Package_DIP:DIP-16_W7.62mm | U7 |
| 1 | AS6C62256 | Package_DIP:DIP-28_W15.24mm | U5 |
| 1 | CPUHDR | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J4 |
| 1 | CTCHDR | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | LOGO | Logo:Z80_inside | G*** |
| 1 | PWR_LED | LED_THT:LED_D3.0mm | D1 |
| 1 | RUN_LED | LED_THT:LED_D3.0mm | D2 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SYS_CLK | Oscillator:Oscillator_DIP-8 | X1 |
| 1 | ULN2803A | Package_DIP:DIP-18_W7.62mm | U8 |
| 1 | Z80CPU | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | Z80CTC | Package_DIP:DIP-28_W15.24mm | U6 |
| 1 | Z80PIO | Package_DIP:DIP-40_W15.24mm | U4 |
| 1 | Z80SIO0 | Package_DIP:DIP-40_W15.24mm | U2 |
| 1 | ZTO-80 Bus | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
The 72 most common of 73 parts.
More from jacobtohahn/ZTO-80
6- 2 layers99.1 × 91.4 mm

- 2 layers99.1 × 57.2 mm

- 2 layers99.1 × 57.2 mm

- 2 layers99.1 × 57.2 mm

- 2 layers99.1 × 57.2 mm

- 2 layers99.1 × 57.2 mm

Similar boards
- 2 layers216 × 150 mm

Motherboard-101
artemisamsx/artemisa
Schematics, PCB designs and HDL simulations to build a 8-bits MSX computer
124 parts67 - 2 layers335 × 218.6 mm

- 2 layers

- 2 layers124.5 × 87.5 mm

S1VirtualFloppy
bml3mk5/L3S1VirtualFloppy
Virtual Floppy Card for HITACHI Basic Master Level3 / MB-S1
71 parts - 2 layers209 × 175 mm

Excalibur64
Cptscorcher/Excallibur-64
A reimagining of the seminal Excalibur 64 Computer
126 partsGPL-3.0 - 2 layers234 × 100 mm

V2b
KITTY-6502/hardware
the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.
147 parts - 4 layers160 × 100 mm

Single board
PrinceYadav78/Single-Board-Computer
A single board computer which can run OS written in C
87 partsMIT - 2 layers

Questions
How big is the SBC3.2 PCB?
It measures 127 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SBC3.2 use?
73 parts, built around the 74HC138, 74HC139D and ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SBC3.2 KiCad files?
From the jacobtohahn/ZTO-80 repository on GitHub, at the commit this page was made from: the board is PCB/SBC/v3.2/SBC3.2.kicad_pcb and its schematic PCB/SBC/SBC Backplane 5/ZTO-80 SBC Backplane 5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SBC3.2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jacobtohahn before reusing the design.