Skip to the content
4 layersLego Measurement, the printed circuit board in 3D
Copper layers
4
Thickness
1.6 mm
Parts
12
Nets
28
Pads
67
Tracks, vias
76, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
1 Nov 2026
Updated
1 Nov 2026

Overview

Lego Measurement is an open-source printed circuit board by jacksterb1234, from the jacksterb1234/Lego_Measurement repository on GitHub. It is a 4-layer board with 12 parts on 28 nets, routed with 76 tracks and 0 vias.

It is built around the EC10E1220501. Its parts include 3 capacitors, 3 resistors, 3 connectors, 1 IC and 1 switch. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

"# Lego_Measurement"

Parts

12
QtyValueFootprintReferences
310KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3
20.1uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC1, C2
1100uFCapacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mmC3
1EC10E1220501Lib:CONN03_EC10E_9P8X6P1_ALPSJ1
1I2C_LCDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Limit_SwitchConnector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_VerticalSW1
1NEMA17Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Pololu_Breakout_A4988Module:Pololu_Breakout-16_15.2x20.3mmA1
1ProMicroLib:ProMicro-EnforcedTopU1

Similar boards

  • 2 layers34 × 107.5 mmEnvOpenMouse, the printed circuit board in 3D

    EnvOpenMouse

    Envious-Data/EnvOpenMouse

    An Open-source mouse for the UK market.

    74 parts6MIT
  • 2 layers58 × 49.5 mmGary the mouse, the printed circuit board in 3D

    Gary the mouse

    Small-doge128/Gary-the-mouse

    A custom mouse with TTC wheel encoder (8mm), lipo battery 1 200mAh, 4x kailh gm 8.0 micro switch and seeed studio nrf52840 all on my custom pcb, but sensor PAW3395 LM19 on badjeffs pcb.

    11 parts1
  • 2 layers57.2 × 78.7 mmMouse Micro, the printed circuit board in 3D

    Mouse Micro

    jacksterb1234/Mouse-Micro

    A fully custom gaming mouse built from scratch — from clay hand modeling and photogrammetry all the way to a custom KiCad PCB.

    22 parts
  • 2 layers45.1 × 74.3 mmCobalt X Zero, the printed circuit board in 3D

    Cobalt X Zero

    RealSynarix/Cobalt-X-Zero

    Custom Gaming Mouse

    49 partsGPL-3.0
  • 4 layers68 × 40 mmSmc-4, the printed circuit board in 3D

    Smc-4

    TommyPersson/modular-keypads

    26 parts
  • 4 layers52.1 × 22.6 mmDisplay eval, the printed circuit board in 3D

    Display eval

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    12 parts4.3kMIT
  • 4 layers140.8 × 53.7 mmEecv breakout, the printed circuit board in 3D

    Eecv breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k

Questions

What parts does the Lego Measurement use?

12 parts, built around the EC10E1220501. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lego Measurement KiCad files?

From the jacksterb1234/Lego_Measurement repository on GitHub, at the commit this page was made from: the board is Lego_Measurement/Lego_Measurement.kicad_pcb and its schematic Lego_Measurement/Lego_Measurement.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lego Measurement design in my own project?

Its repository states no licence, so its author keeps all rights: ask jacksterb1234 before reusing the design.