

Keyboard1
pcb and firmware for a keyboard
- Size
- 298 × 120.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 165
- Nets
- 102
- Pads
- 568
- Tracks, vias
- 927, 31
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Oct 2018
- Updated
- 17 Apr 2019
Overview
Keyboard1 is an open-source printed circuit board by j4cobgarby, from the j4cobgarby/keyboard repository on GitHub. It is a 2-layer board of 298 × 120.6 mm with 165 parts on 102 nets, routed with 927 tracks and 31 vias.
It is built around the ATMEGA32U4-AU. Its parts include 64 diodes, 64 switches, 10 resistors, 7 connectors and 4 capacitors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdMy keyboard
Here's the CAD files and the firmware (which isn't yet written) for a keyboard I'm making.
I'm using KiCAD to create the schematic and PCB design.
I'm using an ATmega32u4 microcontroller to send data to the computer.
Schematic:

Renders

Parts
165| Qty | Value | Footprint | References |
|---|---|---|---|
| 62 | DIODE | Diode_SMD:D_SOD-323_HandSoldering | D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +46 |
| 50 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX1A_1.00u_PCB | K0, K1, K2, K10, K11, K12, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24 +34 |
| 4 | 1k | Resistor_SMD:R_1206_3216Metric | R2, R3, R9, R10 |
| 4 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX1A_1.25u_PCB | K54, K55, K56, K58 |
| 3 | TestPoint_Probe | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric | R6, R7 |
| 2 | 22 | Resistor_SMD:R_1206_3216Metric | R4, R5 |
| 2 | 22p | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C3 |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX1A_1.50u_PCB | K14, K27 |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX1A_2.25u_PCB | K40, K41 |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX1A_1.75u_PCB | K28, K53 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C4 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
| 1 | 300 | Resistor_SMD:R_1206_3216Metric | R8 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | GND | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | J2 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D64 |
| 1 | MISO | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | J6 |
| 1 | MOSI | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | J5 |
| 1 | PWR | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | RESET | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | J7 |
| 1 | SCK | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | J4 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile | SW2 |
| 1 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX1A_2.00u_PCB | K13 |
| 1 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX1A_6.25u_PCB | K57 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | USB_B_Mini | keyboard:Molex_OTG_54819_Right_angle | J1 |
| 1 | VCC | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | J3 |
The 154 most common of 165 parts.
Similar boards
- 2 layers243.2 × 106 mm

- 2 layers228.4 × 85 mm

LeChiffre
tominabox1/Le-Chiffre-Keyboard
Great thanks goes to Jake at P3D for really making the case amazing and open sourcing his work. Check him out at P3Dstore.com
105 parts183GPL-3.0 - 2 layers228.6 × 76.8 mm

Schwann Rev0.5b
The-Royal/The_Royal_Open-Source-Projects
A Master Repository For All things Royal Made
127 parts159MIT - 2 layers30 × 65 mm

Keyboard mcu
dpapavas/lagrange-keyboard
A configurable, handwired, ergonomic keyboard
26 parts137AGPL-3.0 - 2 layers88.4 × 80 mm

LHS Controller PCB
dmcke5/ZenDeck
This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.
76 parts133CERN-OHL-S-2.0 - 2 layers259.5 × 89.1 mm

- 2 layers99.1 × 99.1 mm

Power supply panelized
thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.
223 parts75 - 2 layers323.9 × 95.1 mm

UnSplit
swiftrax/UnSplit
Ergo 40% mechanical keyboard with all components on the top with diodes arranged in an array
110 parts68GPL-2.0
Questions
How big is the Keyboard1 PCB?
It measures 298 × 120.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyboard1 use?
165 parts, built around the ATMEGA32U4-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard1 KiCad files?
From the j4cobgarby/keyboard repository on GitHub, at the commit this page was made from: the board is keyboard1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask j4cobgarby before reusing the design.