
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

Arduino-based audio analyzer with band-pass filtering, signal sampling, and Python FFT for frequency analysis
Filter PCB is an open-source printed circuit board by j1943-oss, from the j1943-oss/Audio-Filter-Complete repository on GitHub. It is a 2-layer board of 65.5 × 36.5 mm with 22 parts on 13 nets, routed with 105 tracks and 5 vias.
It is built around the LM358. Its parts include 7 capacitors, 7 resistors and 2 ICs. It belongs with the audio and music and sensors and measurement boards of this library.
A fourth-order active band-pass audio filter and signal acquisition system designed, simulated, and tested using LTspice, KiCad, Python FFT analysis, an oscilloscope, and a signal generator.
This project combines:
The goal of the project was to create a band-pass filter that focuses on frequencies relevant to human hearing. A circuit that attenuates frequencies outside of approximately 200 Hz–4 kHz while also collecting audio input was simulated, tested, and built. The final PCB had a narrower passband than expected because multiple capacitors were substantially different from their labeled values, with discrepancies of over 30%. After measuring the components and recalculating the filter response, the results matched the behavior observed on the PCB. The system showed clear attenuation of frequencies outside the passband and was able to accurately collect and measure frequency data.
report/ → Experimental report
arduino/ → Arduino code
python/ → Python FFT analysis
kicad/ → Schematic and PCB files
ltspice/ → Circuit simulations
images/ → Project images| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C5, C6 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R5, R7 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | BANDPASS_TEST1, HIGHPASS_TEST1, MIC_TEST1, VREF_TEST1 |
| 2 | 5.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
| 2 | 6.8n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | ARDUINO1, MIC1 |
| 2 | LM358 | Package_DIP:DIP-8_W7.62mm | U1, U2 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C7 |
| 1 | 20k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance


tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen


starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

It measures 65.5 × 36.5 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the j1943-oss/Audio-Filter-Complete repository on GitHub, at the commit this page was made from: the board is kicad/Filter_PCB.kicad_pcb and its schematic kicad/Filter_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask j1943-oss before reusing the design.