Skip to the content
2 layers135.9 × 87 mmPfm3 ctrl, the printed circuit board in 3D

Official repo of the preenfm3 FM synth

Size
135.9 × 87 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
44
Pads
189
Tracks, vias
310, 13
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
10 Sep 2020
Updated
17 Mar 2024

Overview

Pfm3 ctrl is an open-source printed circuit board by Ixox, from the Ixox/preenfm3 repository on GitHub. It is a 2-layer board of 135.9 × 87 mm with 33 parts on 44 nets, routed with 310 tracks and 13 vias.

It is built around the 74HC165D. Its parts include 12 switches, 3 capacitors, 3 ICs, 1 resistor and 1 diode.

Main components

1

README

README.md

preenfm3

Here are the sources for the preenfm3 bootloader and firmware.

Binaries can be found in the Release section.

For the documentation, go to the Wiki.

Xavier

Parts

33
QtyValueFootprintReferences
12PushA_PFM3:FMButton2SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12
6EncoderA_PFM3:FMEncoder2_pfm3Enc1, Enc2, Enc3, Enc4, Enc5, Enc6
3100nFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC16, C17, C18
374hc165A_PFM3:74HC165U1, U2, U3
3Net8Resistor_THT:R_Array_SIP9RN1, RN2, RN3
1470A_PFM3:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1ExtConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1
1LEDA_PFM3:FMLed_pfm3D1
1LOGOA_PFM3:pfm2_logoG***
1pfm3ControlBoardA_PFM3:ControlBoardCB1

The 32 most common of 33 parts.

More from Ixox/preenfm3

3
  • 2 layers135.9 × 87 mmPfm3 ctrl, the printed circuit board in 3D

    Pfm3 ctrl

    Ixox/preenfm3

    Official repo of the preenfm3 FM synth

    65 parts127
  • 2 layers135 × 87 mmPfm3 ctrl, the printed circuit board in 3D

    Pfm3 ctrl

    Ixox/preenfm3

    Official repo of the preenfm3 FM synth

    63 parts127
  • 2 layers135 × 87 mmPfm3 ctrl, the printed circuit board in 3D

    Pfm3 ctrl

    Ixox/preenfm3

    Official repo of the preenfm3 FM synth

    61 parts127

Similar boards

  • 2 layers181 × 97 mmOpenDeck r3.1.2, the printed circuit board in 3D

    OpenDeck r3.1.2

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    262 parts960Apache-2.0
  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers191.8 × 121.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    109 parts184
  • 2 layers171.5 × 106.7 mmSequencer, the printed circuit board in 3D

    Sequencer

    westlicht/performer-hardware

    PER|FORMER Eurorack Sequencer - Hardware Design Files

    435 parts110
  • 2 layers306.1 × 130.2 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64-Home-Computer

    Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

    132 parts94
  • 2 layers215.9 × 20.3 mmKeybed, the printed circuit board in 3D

    Keybed

    friggeri/keyboard

    28 parts69
  • 2 layers300 × 105 mmTR-808-Clone, the printed circuit board in 3D

    TR-808-Clone

    minisystem/880

    A Euroack drum machine

    1,078 parts67
  • 4 layers100 × 100 mmPCBA OCTV, the printed circuit board in 3D

    PCBA OCTV

    intechstudio/grid-hardware

    403 parts59GPL-3.0

Questions

How big is the Pfm3 ctrl PCB?

It measures 135.9 × 87 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pfm3 ctrl use?

33 parts, built around the 74HC165D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pfm3 ctrl KiCad files?

From the Ixox/preenfm3 repository on GitHub, at the commit this page was made from: the board is hardware/controlboard/pfm3_ctrl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pfm3 ctrl design in my own project?

Its repository states no licence, so its author keeps all rights: ask Ixox before reusing the design.