

Rain Sense
PCB design as well as case design for a rain sensor. KiCad and FreeCad.
- Size
- 120 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 65
- Pads
- 182
- Tracks, vias
- 403, 211
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Jul 2026
- Updated
- 13 Jul 2026
Overview
Rain Sense is an open-source printed circuit board by Iva0108, from the Iva0108/Rain-Sense repository on GitHub. It is a 2-layer board of 120 × 95 mm with 55 parts on 65 nets, routed with 403 tracks and 211 vias.
It is built around the LM393N and PJ-102A. Its parts include 20 capacitors, 11 resistors, 4 diodes, 4 connectors and 3 ICs. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
2README
README.mdRainSense is a STM32-based rain detection system designed to monitor rainfall conditions and provide real-time feedback based on sensor measurements. The project focuses on detecting the presence of rain using an electronic sensing system and processing the collected data with a microcontroller, after which the data is displayed on SSD1306 OLED (128×64). Designed in KiCad 9.0.
Features:
- Custom power supply
- BluePill
- Signal processing block (processes the signals sent by the sensor)
- OLED display
- ST Link for programming the MCU
3D view of PCB:
In case:
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C14, C15, C16, C17, C18, C19, C21 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R6, R7, R9 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 2 | 15p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C12 |
| 2 | 1N4001 | Diode_SMD:D_SMA | D1, D4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C10 |
| 2 | 33R | Resistor_SMD:R_0805_2012Metric | R15, R16 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 100u/25V | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C1 |
| 1 | 10k | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | RV1 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C20 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 220u/10V Tantalum | Capacitor_Tantalum_SMD:CP_EIA-7343-43_Kemet-X | C3 |
| 1 | 240R 1% | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 32.768k | Library ona dva kristal oscilatora:XTAL_MC-306_32.7680K-G0_ROHS | Y2 |
| 1 | 390R | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 600R@100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | Choke_CommonMode_PulseElectronics_PH9455x105NL | Inductor_THT:L_CommonMode_Toroid_Vertical_L19.3mm_W10.8mm_Px6.35mm_Py15.24mm_Bourns_8100 | FL1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | OLED_display1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D3 |
| 1 | Heatsink_Pad_2Pin | heatsink biblioteka:Heatsink_Fischer_SK104-STCB_35x13mm__2xDrill3.5mm_ScrewM3 | HS1 |
| 1 | LED | LED_THT:LED_D5.0mm_Horizontal_O6.35mm_Z3.0mm | D5 |
| 1 | LM317T_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LM393N | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | PJ-102A | pj 102a:CUI_PJ-102A | J4 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SW_SPDT | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | SW3 |
| 1 | SW_SPDT | Button_Switch_THT:SW_NKK_BB15AH | SW1 |
Similar boards
- 2 layers101.5 × 63 mm

- 2 layers180 × 130 mm

Cell test bench
0hasant/Liion_Cell_Simulator
Single-cell characterization bench for 18650 and 21700 Li-ion cells (DMEGC INR45E, generic 3.5 Ah 18650). Part of the Solaris final-year project.
133 parts - 2 layers60 × 80 mm

- 2 layers36 × 26 mm

- 2 layers48 × 72 mm

- 2 layers81 × 54.5 mm

FullSheetCurlingTimer
theznerd/FullSheetCurlingTimer
An exploration of ESP32, Bluetooth GATT, and ESP-NOW to create a full-sheet curling timer for practice.
25 parts - 2 layers97.1 × 97 mm

- 2 layers91.5 × 45 mm

Octo Hub
CodapopKSP/UntitledSpaceCraft
The entire project files from the Untitled Space Craft brand of Kerbal controllers.
132 parts40GPL-3.0
Questions
How big is the Rain Sense PCB?
It measures 120 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rain Sense use?
55 parts, built around the LM393N and PJ-102A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rain Sense KiCad files?
From the Iva0108/Rain-Sense repository on GitHub, at the commit this page was made from: the board is RainSense/RainSense.kicad_pcb and its schematic RainSense/Display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rain Sense design in my own project?
Its repository states no licence, so its author keeps all rights: ask Iva0108 before reusing the design.