Skip to the content
2 layers89.9 × 53.3 mmCoolingBoxWireOrganizer, the printed circuit board in 3D
Size
89.9 × 53.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
136
Pads
320
Tracks, vias
634, 266
Pours
9
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
30 May 2024
Updated
25 Oct 2024

Overview

CoolingBoxWireOrganizer is an open-source printed circuit board by Itaru-Kitano, from the Itaru-Kitano/CoolingBoxWireOrganizer repository on GitHub. It is a 2-layer board of 89.9 × 53.3 mm with 67 parts on 136 nets, routed with 634 tracks and 266 vias.

It is built around the MAX31855KASA+T and DILB16P-223TLF. Its parts include 23 connectors, 20 resistors, 8 inductors, 7 diodes and 5 capacitors.

Main components

2

README

README.md

CoolingBoxWireOrganizer

Parts

67
QtyValueFootprintReferences
8390Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4, R5, R6, R7, R8, R9, R10, R11
8L_FerriteInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderL1, L2, L3, L4, L5, L6, L7, L8
7DDiode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1, D2, D3, D4, D5, D6, D8
610000Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R12, R13, R15, R17, R19
5Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ6, J7, J8, J10, J13
40.01uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C3, C4, C5
41000Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR14, R16, R18, R20
4Conn_01x02my_expanded_footprint_library:Molex_Pico-Clasp_501331-0207_1x02-1MP_P1.00mm_VerticalJ14, J17, J21, J22
4MAX31855KASAmy_expanded_footprint_library:SOIC-8_3.9x4.9mm_P1.27mmU1, U2, U3, U4
3Conn_02x02_Odd_Evenmy_expanded_footprint_library:Molex_Pico-Clasp_501331-0407_1x04-1MP_P1.00mm_VerticalJ1, J11, J16
3DILB16P-223TLFmy_library:AMPHENOL_DILB16P-223TLFJ18, J19, J23
2Conn_01x02Connector_Molex:Molex_Micro-Fit_3.0_43045-0215_2x01_P3.00mm_VerticalJ2, J4
2Conn_02x03_Odd_EvenConnector_Molex:Molex_Micro-Fit_3.0_43045-0615_2x03_P3.00mm_VerticalJ9, J12
10.1uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1
11800Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3
13900Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2
1Conn_01x08my_expanded_footprint_library:Molex_Pico-Clasp_501331-0807_1x08-1MP_P1.00mm_VerticalJ3
1Conn_01x10_PinConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ5
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ20
1Conn_02x18_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_VerticalJ15

Similar boards

  • 4 layers154.1 × 161.7 mmFrankenso, the printed circuit board in 3D

    Frankenso

    rusefi/rusefi-hardware

    614 parts52
  • 4 layers100 × 100 mmUaefi, the printed circuit board in 3D

    Uaefi

    rusefi/uaefi

    🔴Community support ONLY 🔴 https://www.facebook.com/groups/rusEfi 🔴 Discord🔴 Commercial Support 🔴

    171 parts39
  • 2 layers60 × 90 mmLogger, the printed circuit board in 3D

    Logger

    voltlog/Voltlogger

    More info about this project in Voltlog #368. If you would like to order one of these boards ready assembled, check out my Tindie store.

    111 parts17GPL-3.0
  • 4 layers43 × 89 mmReflowControllerV2, the printed circuit board in 3D

    ReflowControllerV2

    walclu/smartReflow

    Repository for STM32WB55 based reflow toaster oven controller.

    99 parts15
  • 2 layersJF ECU32, the printed circuit board in 3D

    JF ECU32

    JoachimF/JF-ECU32

    RC Jet Engine ECU

    27 parts12GPL-3.0
  • 4 layers28.2 × 85.1 mmEsp32 din rail, the printed circuit board in 3D

    Esp32 din rail

    ldab/esp32_pottery_kiln

    ESP32 based Stoneware 1240ºC pottery kiln

    38 parts11MIT
  • 2 layers80 × 61 mmUsb thermo logger, the printed circuit board in 3D

    Usb thermo logger

    richardklingler/usbthermocouple

    This is my first ever published project on Github, so most probably not error free (o;

    61 parts11GPL-3.0

Questions

How big is the CoolingBoxWireOrganizer PCB?

It measures 89.9 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CoolingBoxWireOrganizer use?

67 parts, built around the MAX31855KASA+T and DILB16P-223TLF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CoolingBoxWireOrganizer KiCad files?

From the Itaru-Kitano/CoolingBoxWireOrganizer repository on GitHub, at the commit this page was made from: the board is CoolingBoxWireOrganizer.kicad_pcb and its schematic CoolingBoxWireOrganizer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CoolingBoxWireOrganizer design in my own project?

Its repository states no licence, so its author keeps all rights: ask Itaru-Kitano before reusing the design.