IstratieStefan/ARC-HardwareHardware repo for ARC
KICAD PROJECT is an open-source printed circuit board by IstratieStefan, from the IstratieStefan/ARC-Hardware repository on GitHub, published under the MIT licence. It is a 4-layer board of 89.5 × 121.6 mm with 150 parts on 150 nets, routed with 1,123 tracks and 219 vias.
It is built around the PAM8302AADCR, TPS61032PWP and PCM5102APW, with the RP2040-ZERO, 1N4148W and BSS84 among its other parts. Its parts include 43 diodes, 43 switches, 22 capacitors, 19 resistors and 6 ICs. It belongs with the RP2040 boards of this library.
Hardware repo for ARC
| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | 1N4148W | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +23 |
| 39 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +23 |
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C12, C15, C16, C17, C20, C21 |
| 6 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C13, C14, C24, C25 |
| 5 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R11, R12, R13, R18 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15, R20 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C11, C19 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D41, D42, D43 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H2, H3, H4 |
| 3 | SW_Push | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx31-2LFS | SW37, SW39, SW43 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R19 |
| 2 | 2.2nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 2 | 220pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22, C23 |
| 2 | 4.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R16 |
| 2 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4, J5 |
| 2 | FerriteBead_Small | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2 |
| 1 | 1.69M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 180K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18 |
| 1 | 2.1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 200K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 220uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C5 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 390K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 6.8uH | Inductor_SMD:L_Bourns_SRP5030T | L1 |
| 1 | AudioJack3_Ground_SwitchTR | Connector_Audio:Jack_3.5mm_CUI_SJ2-3593D-SMT_Horizontal | J1 |
| 1 | BC857 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | MCP73833-xxx-MF | Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.58x2.35mm | U8 |
| 1 | PAM8302AAD | Package_SO:MSOP-8_3x3mm_P0.65mm | U4 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | PMEG4020ER, 115 | Diode_SMD:Nexperia_CFP3_SOD-123W | D40 |
| 1 | RP2040-ZERO | RP2040-Tiny_kicad-main:RP2040-Tiny-smd | U3 |
| 1 | Raspberry pi Zero 2 w | Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles | U2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW44 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | Speaker | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | LS1 |
| 1 | TPS61032PWP | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm | IC1 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | P1 |
| 1 | ~ | arc:3.5inch Display | RPi screen1 |
CapelessCrusaders/BeagleBoy
This project is an entry in the Texas Instruments Intern Design Challenge 2013. It is a cape for the BeagleBone Black which turns the BBB into a handheld gaming console with the addition of an LCD cape stacked on top or…
g210101021/OpenStylophone-RP2040
Overview • Technical Summary • Architecture • Hardware Audit & Remediation • Schematic Subsystems • PCB Layout • Firmware Roadmap • Bill of Materials • Author
tothpetiszilard/a3_8p_redFIS
Hacking into Audi A3 8P Driver Information System
spartacus-hf/spartacus_PCB_REV1
KiCad schematic and PCB project for the SPARTACUS-HF Chireix transceiver.
It measures 89.5 × 121.6 mm and has 4 copper layers, 1.6 mm thick.
150 parts, built around the PAM8302AADCR, TPS61032PWP, PCM5102APW and RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IstratieStefan/ARC-Hardware repository on GitHub, at the commit this page was made from: the board is KICAD PROJECT/KICAD PROJECT.kicad_pcb and its schematic KICAD PROJECT/KICAD PROJECT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).