Skip to the content
4 layers62 × 82 mmGATOR, the printed circuit board in 3D

Building custom flight computers

Size
62 × 82 mm
Copper layers
4
Thickness
1.6 mm
Parts
93
Nets
134
Pads
453
Tracks, vias
705, 397
Pours
24
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
14 Oct 2020
Updated
7 Nov 2026

Overview

GATOR is an open-source printed circuit board by ISSUIUC, from the ISSUIUC/ISS-PCB repository on GitHub. It is a 4-layer board of 62 × 82 mm with 93 parts on 134 nets, routed with 705 tracks and 397 vias.

It is built around the E22-400MM22S, ESP32-S3-MINI-1U-N8 and TMC2660C-PA, with the ECMF02-2AMX6, MAX-M10S and AT-0927-TT-6-R among its other parts. Its parts include 30 capacitors, 22 resistors, 9 ICs, 7 connectors and 3 diodes. It belongs with the sensors and measurement boards and the ESP32 boards of this library.

Main components

7

README

boards/Feather_Duo/README.md

Feather Duo

The Feather Duo radio receiver was conceived to optimize communication with MIDAS and simplify the team’s ground station setup, including two LoRa radios for concurrent reception from both stages and software support for increased data rates. It succeeds the Adafruit Feather M0 RFM96 as the team’s primary ground station receiver.

Read more about the Feather Duo, MIDAS and the surrounding avionics systems in the MIDAS MK2 Report.

Schematics

Printable PDF schematics and layouts for the Feather Duo can be found in the PDFs and images folders.

Photos

Feather-Duo-photo

Parts

93
QtyValueFootprintReferences
8100nFCapacitor_SMD:C_0603_1608MetricC1, C3, C8, C10, C14, C16, C18, C25
510Resistor_SMD:R_0603_1608MetricR3, R4, R8, R9, R401
510uFCapacitor_SMD:C_0805_2012MetricC4, C5, C17, C19, C26
40.075Resistor_SMD:R_1206_3216MetricR5, R6, R10, R11
3470Resistor_SMD:R_0603_1608MetricR16, R17, R21
3MountingHoleMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3
20.1uFCapacitor_SMD:C_0603_1608MetricC102, C103
2100uFCapacitor_SMD:C_1210_3225MetricC13, C15
210nFCapacitor_SMD:C_0603_1608MetricC22, C402
21uFCapacitor_SMD:C_0603_1608MetricC11, C23
2220nFCapacitor_SMD:C_0603_1608MetricC2, C12
222uFCapacitor_SMD:C_0603_1608MetricC6, C27
23V3TestPoint:TestPoint_Keystone_5000-5004_MiniatureTP3V3-1, TP3V3-2
24.7kResistor_SMD:R_0603_1608MetricR19, R20
2470nFCapacitor_SMD:C_0603_1608MetricC7, C20
25.1kResistor_SMD:R_0603_1608MetricR1, R2
2Conn_01x04Connector_Molex:Molex_Mini-Fit_Jr_5566-04A2_2x02_P4.20mm_VerticalJ2, J4
2GNDTestPoint:TestPoint_Keystone_5000-5004_MiniatureTP-GND-1, TP-GND-2
2LEDLED_SMD:LED_0603_1608MetricD1, D2
2SMAConnector_Coaxial:SMA_Molex_73251-2120_EdgeMount_HorizontalJ5, J401
2TMC2660CPackage_QFP:TQFP-44_10x10mm_P0.8mmU1, U4
1100kResistor_SMD:R_0603_1608MetricR7
110uFCapacitor_SMD:C_0603_1608MetricC21
11200uFCapacitor_THT:CP_Radial_D18.0mm_P7.50mmC9
11kResistor_SMD:R_0603_1608MetricR15
120kResistor_SMD:R_0603_1608MetricR18
123.7kResistor_SMD:R_0603_1608MetricR12
127nHInductor_SMD:L_0603_1608MetricL401
130kResistor_SMD:R_0603_1608MetricR14
1330nHInductor_SMD:L_0603_1608MetricL1
147pFCapacitor_SMD:C_0603_1608MetricC403
15kResistor_SMD:R_0603_1608MetricR13
1AT-0927-TT-6-RBuzzer:Buzzer_AT-0927-TT-6-RBZ1
1E22-400MM22SRF_Module_Ebyte:E22-400MM22SU5
1ECMF02-2AMX6Package_DFN_QFN:ST_UQFN-6L_1.5x1.7mm_P0.5mmU3
1ESP32-S3-MINI-1URF_Module:ESP32-S2-MINI-1UU2
1GPIO14TestPoint:TestPoint_Keystone_5000-5004_MiniatureTP-IO14-1
1GPIO15TestPoint:TestPoint_Keystone_5000-5004_MiniatureTP-IO15-2
1GPIO16TestPoint:TestPoint_Keystone_5000-5004_MiniatureTP-IO16-3
1GPIO17TestPoint:TestPoint_Keystone_5000-5004_MiniatureTP-IO17-4
1I2C_SCLTestPoint:TestPoint_Keystone_5000-5004_MiniatureTPSCL1
1I2C_SDATestPoint:TestPoint_Keystone_5000-5004_MiniatureTPSDA1
1LOGOLOGOG***
1LSM6DSLTRPackage_LGA:Bosch_LGA-14_3x2.5mm_P0.5mmU102
1MAX-M10SRF_GPS:ublox_MAXU403
1PRT-14417Connector_QWIIC:Qwiic_4_pin_horizontalJ6
1RED LEDLED_SMD:LED_0603_1608MetricD3
1SCKTestPoint:TestPoint_Keystone_5000-5004_MiniatureTPSCK1
1SDITestPoint:TestPoint_Keystone_5000-5004_MiniatureTPSDI1
1SDOTestPoint:TestPoint_Keystone_5000-5004_MiniatureTPSDO1
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW2
1SW_PushConnector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_VerticalSW1
1TLE42744Package_TO_SOT_SMD:SOT-223U8
1TPS2121Package_VQFN:VQFN-HR-RUX0012AU6
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1
1XT60Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_VerticalJ3

More from ISSUIUC/ISS-PCB

12
  • 4 layers60 × 100 mmMIDAS MK1, the printed circuit board in 3D

    MIDAS MK1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    221 parts33
  • 4 layers60 × 100 mmMIDAS MK1.1, the printed circuit board in 3D

    MIDAS MK1.1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    221 parts33
  • 4 layers45 × 100 mmMIDAS MK2.1, the printed circuit board in 3D

    MIDAS MK2.1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    219 parts33
  • 4 layers45 × 100 mmMIDAS MK2, the printed circuit board in 3D

    MIDAS MK2

    ISSUIUC/ISS-PCB

    Building custom flight computers

    217 parts33
  • 4 layers70 × 70 mmBAGEL MK1, the printed circuit board in 3D

    BAGEL MK1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    199 parts33
  • 4 layers25 × 80 mmMini MK1, the printed circuit board in 3D

    Mini MK1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    135 parts33
  • 4 layers70 × 70 mmBAGEL MK1.1-Butter, the printed circuit board in 3D

    BAGEL MK1.1-Butter

    ISSUIUC/ISS-PCB

    Building custom flight computers

    125 parts33
  • 4 layers40 × 60 mmCAM MK3-revB, the printed circuit board in 3D

    CAM MK3-revB

    ISSUIUC/ISS-PCB

    Building custom flight computers

    117 parts33
  • 2 layers40 × 60 mmSG CAM, the printed circuit board in 3D

    SG CAM

    ISSUIUC/ISS-PCB

    Building custom flight computers

    116 parts33
  • 4 layers40 × 40 mmCAM MK2.1, the printed circuit board in 3D

    CAM MK2.1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    114 parts33
  • 2 layers100 × 80 mmSPARK MK1, the printed circuit board in 3D

    SPARK MK1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    78 parts33
  • 4 layers50 × 55 mmEAGLE MK1-revA, the printed circuit board in 3D

    EAGLE MK1-revA

    ISSUIUC/ISS-PCB

    Building custom flight computers

    73 parts33

Similar boards

  • 2 layers50 × 70 mmTime2time, the printed circuit board in 3D

    Time2time

    Resaj/time2time

    Chronometer with partials measurement for the line-following competitions

    97 parts5
  • 4 layers16 × 39 mmGPS Tracker, the printed circuit board in 3D

    GPS Tracker

    miket6000/SimpleTracker

    A simple GPS Tracker for model rocketry.

    47 parts2CERN-OHL-W-2.0
  • 4 layers26 × 28 mmLora framework, the printed circuit board in 3D

    Lora framework

    TheSilentDefender/lora_expansion_card

    20 parts1MIT
  • 4 layers18 × 26 mmStone, the printed circuit board in 3D

    Stone

    UCSCRocketry/stone

    43 parts
  • 4 layers80 × 50 mmOzone telecom, the printed circuit board in 3D

    Ozone telecom

    DashiellRussell/UNSW_Rocketry_Senior_Flight_Computer

    KiCad project for the senior flight computer used by UNSW Rocketry.

    118 parts
  • 4 layers40.1 × 82.8 mmFlightPCB, the printed circuit board in 3D

    FlightPCB

    Shubhamai/tsar

    General-purpose & fully programmable flight computer PCB desgined in KiCad EDA

    143 parts

Questions

How big is the GATOR PCB?

It measures 62 × 82 mm and has 4 copper layers, 1.6 mm thick.

What parts does the GATOR use?

93 parts, built around the E22-400MM22S, ESP32-S3-MINI-1U-N8, TMC2660C-PA and ECMF02-2AMX6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GATOR KiCad files?

From the ISSUIUC/ISS-PCB repository on GitHub, at the commit this page was made from: the board is boards/Motor-MK2 (GATOR)/GATOR.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the GATOR design in my own project?

Its repository states no licence, so its author keeps all rights: ask ISSUIUC before reusing the design.