Skip to the content
2 layersIowLabs incubadora, the printed circuit board in 3D

IowLabs incubadora

iowlabs/incubadora1

Proyecto para confeccionar una incubadora bajo costo.

Copper layers
2
Thickness
1.6 mm
Parts
59
Nets
93
Pads
265
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
23 Nov 2024
Updated
16 Oct 2026

Overview

IowLabs incubadora is an open-source printed circuit board by iowlabs, from the iowlabs/incubadora repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 59 parts on 93 nets.

It is built around the ESP32-S3-WROOM-1-N8, XL4015E1 and LM1117MP-3.3, with the LESD5D5.0CT1G and 1N5819WS among its other parts. Its parts include 14 capacitors, 13 resistors, 13 connectors, 10 diodes and 3 ICs. It belongs with the ESP32 boards of this library.

Main components

5

README

README.md

incubadora

Hola estamos probando el flujo de git

This project consists of a low-cost incubator for biotechnology instrumentation. Its design is easy to integrate and adaptable to different scenarios. It is ideal for remote laboratories, field deployments, school laboratories, and educational kits.

For this project, a PCB was designed that implements the electronics to control the operation of an incubator. It includes a temperature control and a shaker for sample agitation.

The PCB is based on a ESP32 so It can implement remote control and monitoring via Wi-Fi or BLE. It also has access to a USB communication interface for parameter configuration, curve generation, and data acquisition. It also features a simple interface that uses an LCD display and a rotary encoder as an alternative control method.

Features.

General features:

  • Temperature Control
  • Shaker RPM Control
  • Simple User Interface
  • WiFi Remote Control Capability
  • Temperature profile programming
  • easy assembly

Hardware Features

  • ESP32 Microcontroller
  • PID Temperature Control Loop
    • Heater: Peltier-controlled by a H-bridge (2 separated heater channels)
    • Temperature Sensor: SHT31 ambient temperature and humidity sensor via I²C
    • Fan Assembly
  • Shaker Control:
    • Nema 17 Motor
    • DRV8825 Polulu Controller
  • Local User Interface
    • Rotary Encoder
    • LCD Display
    • SD Card
  • WiFi Remote Control
    • MQTT Commands
  • INA219 Current Sensor for Measuring Input Power Consumption

Documentación

  • Github repo
  • Web

Licencias

Licence
Hardware---------
Firmware and Software---------
Documentation and files---------

Diseño e implementación


PCB

Schematic

pcb BOM


Case 3D and structure


List of components

Assembly steps


Firmware

Used libraries

Structure of the code

Available Features.


Application examples

Using a portable cooler as incubator.

Using a large incubator.

Code to acquire and plot data in real time.

Controlling via MQTT.

Parts

59
QtyValueFootprintReferences
51uCapacitor_SMD:C_0805_2012MetricC11, C12, C14, C16, C17
5HDR-4x1Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ1, J5, J7, J8, J10
4100nCapacitor_SMD:C_0603_1608MetricC2, C7, C9, C10
410KResistor_SMD:R_0603_1608MetricR6, R7, R8, R13
43.3kResistor_SMD:R_0603_1608MetricR1, R2, R3, R5
4LEDLED_SMD:LED_0603_1608MetricD2, D8, D9, D10
310uCapacitor_SMD:C_0805_2012MetricC1, C6, C8
31kResistor_SMD:R_0603_1608MetricR10, R11, R12
3LESD5D5.0CT1GDiode_SMD:D_SOD-523D4, D5, D6
2Conn_02x04_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ11, J12
2SW_DIP_x02IoWLabs:SMD_SWITCHSW1, SW2
11N5819WSDiode_SMD:D_SOD-323D3
1220uFCapacitor_SMD:CP_Elec_8x10.5C13
13.3KResistor_SMD:R_0603_1608MetricR9
1330Resistor_SMD:R_0603_1608MetricR4
1330uFCapacitor_SMD:CP_Elec_8x10.5C15
147uHInductor_SMD:L_12x12mm_H8mmL1
1B540Diode_SMD:D_SMB_HandsolderingD7
1D_SchottkyDiode_SMD:D_SMAD11
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U3
1FUSEFuse:Fuse_1206_3216MetricF1
1HDR-2x1Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ13
1HDR-5x1Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ6
1LM1117MP-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U6
1ON OFFConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1Pololu_Breakout_DRV8825Module:Pololu_Breakout-16_15.2x20.3mmA1
1Q_PMOS_GSDPackage_TO_SOT_SMD:SOT-23Q2
1USB_C_Plug_USB2.0Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalP1
1VINIoWLabsConnectors:Tb-2x1-5p-TH-VJ2
1XL4015Package_TO_SOT_SMD:TO-263-5_TabPin3U5
1~IoWLabsConnectors:microSD_push_pushJ14

More from iowlabs/incubadora

1
  • 2 layers100 × 70 mmPCB incubadora, the printed circuit board in 3D

    PCB incubadora

    iowlabs/incubadora

    Proyecto para confeccionar una incubadora bajo costo.

    55 parts1GPL-3.0

Similar boards

  • 2 layers85 × 65 mmFuente regulable, the printed circuit board in 3D

    Fuente regulable

    iowlabs/camara_electroforesis

    Dispositivo para la instrumentación de experimentos de electroforesis. Considera tanto el diseño de un modelo 3D para el tanque, como la electrónica para una fuente generadora de voltaje.

    80 parts1GPL-3.0
  • 2 layers95 × 57 mmSnakeCYD, the printed circuit board in 3D

    SnakeCYD

    Nadoooor/SnakeCYD

    a custom CYD, all in an PCB with snake style

    39 partsMIT
  • 4 layersESP-32, the printed circuit board in 3D

    ESP-32

    gabriel202010406/Electiva2023

    36 parts
  • 4 layers34 × 48.5 mmProbe, the printed circuit board in 3D

    Probe

    milv24/Diseno-para-mecatronicos.-Electiva

    36 parts
  • 2 layers121 × 121 mmGlobal ESP32S3 PCB, the printed circuit board in 3D

    Global ESP32S3 PCB

    TiTooom/Global_ESP32S3_PCB

    Carte électronique ESP32-S3-WROOM-U1 permettant de controller : - Jusqu'à 3 NEMA 17 - 3 Capteurs TOF VL53L0X (i2c) - 1 écran OLED 0.96 12864 (i2c) - Buzzer - LiDAR

    85 parts
  • 2 layers58.9 × 39.1 mmBattery pwr brd r3, the printed circuit board in 3D

    Battery pwr brd r3

    jerryok826/Battery-PWR-Board

    Battery PWR Board

    31 partsMIT
  • 2 layers35.1 × 28.9 mmBms buck boost, the printed circuit board in 3D

    Bms buck boost

    tor1kk/bms-buck-boost

    Battery Management System (BMS) with Buck-Boost Converter

    38 parts10GPL-3.0
  • 2 layers62.4 × 57 mmEcho button thing, the printed circuit board in 3D

    Echo button thing

    bootsie123/echo-button-thing

    A PCB replacement for the Echo Button allowing support for Home Assistant through ESPHome

    33 parts6GPL-3.0

Questions

What parts does the IowLabs incubadora use?

59 parts, built around the ESP32-S3-WROOM-1-N8, XL4015E1, LM1117MP-3.3 and LESD5D5.0CT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IowLabs incubadora KiCad files?

From the iowlabs/incubadora repository on GitHub, at the commit this page was made from: the board is electronics/incubadora_pcb/iowLabs_incubadora.kicad_pcb and its schematic electronics/PCB_incubadora/PCB_incubadora.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IowLabs incubadora design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).