

Ckt xing basic
Simple Model Railroad Grade Crossing Controller
- Size
- 76.2 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 38
- Pads
- 156
- Tracks, vias
- 406, 78
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Oct 2019
- Updated
- 11 Oct 2026
Overview
Ckt xing basic is an open-source printed circuit board by IowaScaledEngineering, from the IowaScaledEngineering/ckt-xing repository on GitHub. It is a 2-layer board of 76.2 × 63.5 mm with 49 parts on 38 nets, routed with 406 tracks and 78 vias.
It is built around the ATTINY861A-SU, PAM8301AAF and W25Q128JVSIQ, with the AP7381-33Y, SM04B-SRSS-TB and ZXMS6004FF among its other parts. Its parts include 9 capacitors, 9 resistors, 7 diodes, 7 connectors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATTINY861A-SU
SOIC-20-300mil-40℃~+85℃ 1.8V~5.5V 10bit 16 20MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH SOIC-20-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)PAM8301AAF
SOT-23-6-40℃~+85℃ 1-Channel 1.5Wx1@8Ω 2.5V~5.5V 4mA 50dB 78dB 88% Class D Enable/shutdown function、Filterless architecture SOT-23-6 Audio Amplifiers ROHSDiodes IncorporatedAudio AmplifiersW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAP7381-33Y
SOT-89-40℃~+125℃@(Tj) 1 150mA 1V@(100mA) 2.5uA 3.3V 40V 60dB Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSM04B-SRSS-TB
Header SR 1.0 SMT side entry, 1mm pitchJSTUncategorisedZXMS6004FF
SOT-23F-40℃~+125℃ 1 1.3A 350mΩ 60V Active High Low Side Switch SOT-23F Power Distribution Switches ROHSDiodes IncorporatedPower Distribution Switches
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R2, R7, R8, R9 |
| 4 | CDBM140G | Diode_SMD:D_SOD-123 | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3, C8, C9 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R5, R6 |
| 3 | SM04B-SRSS | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2, J4, J5 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | RED LED | LED_SMD:LED_0805_2012Metric | D6, D7 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type059_RT06303HBWC_1x03_P3.50mm_Horizontal | J6, J7 |
| 2 | ZXMS6004FF | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10k | ISE_UltraLibrarian:POT_3361P_BRN | R4 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 68uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C2 |
| 1 | AP7381-33Y | ISE_Generic:SOT-89-3 | U3 |
| 1 | ATtiny861A-S | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U2 |
| 1 | Conn_02x05_Counter_Clockwise | Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | J3 |
| 1 | GREEN LED | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | LOGO | ISE_Generic:IMG_RRXING | G*** |
| 1 | PAM8301 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | SW_DIP_x05 | ISE_UltraLibrarian:CST_219SMT | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00012_1x02_P5.00mm_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
More from IowaScaledEngineering/ckt-xing
2- 2 layers127 × 76.2 mm

- 2 layers76.2 × 63.5 mm

Similar boards
- 2 layers127 × 76.2 mm

- 2 layers133.4 × 127 mm

Mss xcade
IowaScaledEngineering/mss-xcade
Modular Signal System 4 Port Complex Cascade
233 partsGPL-3.0 - 2 layers101.6 × 120.7 mm

Mss cascade basic testjig
IowaScaledEngineering/mss-cascade
Integrated Cascade Module for Free-mo Modular Signal System
101 parts - 2 layers95.2 × 57.2 mm

- 2 layers50.8 × 25.4 mm

Ckt irsense split
IowaScaledEngineering/ckt-irsense
CKT-IRSENSE Reflective Infrared Proximity Sensor
26 parts1 - 2 layers60.3 × 50.8 mm

- 2 layers100 × 87 mm

Bertha main
Hackuarium/bioreactor
Please refer to the documentation for all useful information.
159 parts7 - 2 layers100 × 87 mm

Questions
How big is the Ckt xing basic PCB?
It measures 76.2 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ckt xing basic use?
49 parts, built around the ATTINY861A-SU, PAM8301AAF, W25Q128JVSIQ and AP7381-33Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ckt xing basic KiCad files?
From the IowaScaledEngineering/ckt-xing repository on GitHub, at the commit this page was made from: the board is kicad/ckt-xing-basic/ckt-xing-basic.kicad_pcb and its schematic kicad/ckt-xing-adv/ckt-xing-adv.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ckt xing basic design in my own project?
Its repository states no licence, so its author keeps all rights: ask IowaScaledEngineering before reusing the design.