Skip to the content
2 layers81.3 × 88.9 mmMultiplexer, the printed circuit board in 3D

Rodeostat design files, software and firmware

Size
81.3 × 88.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
31
Pads
121
Tracks, vias
413, 28
Routed
Yes
KiCad
KiCad 3
Created
20 Jun 2020
Updated
29 Oct 2026

Overview

Multiplexer is an open-source printed circuit board by iorodeo, from the iorodeo/potentiostat repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 81.3 × 88.9 mm with 23 parts on 31 nets, routed with 413 tracks and 28 vias.

Its parts include 8 capacitors, 5 connectors, 4 ICs and 2 switches.

README

README.md

IO Rodeo Rodeostat

alt text

Hardware design, firmware and software for IO Rodeo's Rodeostat Potentiostat.

Hardware

  • Designed as a shield for teensy 3.2 development board.
  • 12-bit voltage output with four range settings: +/- 1, 2, 5, 10V
  • 16-bit current measurement with four range settings: +/- 1, 10, 100, 1000 uA ranges
  • Can be programmed over USB using the Arduino IDE (teensyduino).
  • Expansion headers with DIO, analog inputs, UART, I2C, and SPI
  • Schematic

Firmware

  • Implements many standard voltammetric methods including:
    • constant voltage,
    • cyclic voltammetry,
    • sinusoidal voltammetry,
    • linearsweep voltammetry,
    • chronoamperometry,
    • multistep.
  • API for control over USB/Serial using messages in JSON.
  • Easy to extend enabling users to add custom tests.

Libraries

Software

Parts

23
QtyValueFootprintReferences
80.1uFSM0805C1, C2, C3, C4, C5, C6, C7, C8
4ADG44X16-SOIC-0154U1, U2, U3, U4
4VAL**4-404-40, M1, M2, M3
2CONN_2PIN_ARRAY_2X1P3, P4
2CONN_5X25X2_SHRD_HEADERP1, P2
1CONN_3PIN_ARRAY_3X1K1
1CONN_3CONNBLOCK3K2
1CONN_7CONNBLOCK7P5

More from iorodeo/potentiostat

9
  • 2 layers144.8 × 88.9 mmPotentiostat, the printed circuit board in 3D

    Potentiostat

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    142 parts57CC-BY-4.0
  • 2 layers144.8 × 88.9 mmPotentiostat, the printed circuit board in 3D

    Potentiostat

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    141 parts57CC-BY-4.0
  • 2 layers144.8 × 88.9 mmPotentiostat, the printed circuit board in 3D

    Potentiostat

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    99 parts57CC-BY-4.0
  • 2 layers82.6 × 88.9 mmMultiplexer, the printed circuit board in 3D

    Multiplexer

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    26 parts57CC-BY-4.0
  • 2 layers82.6 × 88.9 mmMultiplexer, the printed circuit board in 3D

    Multiplexer

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    22 parts57CC-BY-4.0
  • 2 layers31.8 × 50.8 mmDummy cell, the printed circuit board in 3D

    Dummy cell

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    9 parts57CC-BY-4.0
  • 2 layers26.7 × 50.8 mmAdapter, the printed circuit board in 3D

    Adapter

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    8 parts57CC-BY-4.0
  • 2 layers26.7 × 50.8 mmAdapter, the printed circuit board in 3D

    Adapter

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    3 parts57CC-BY-4.0
  • 2 layers12 × 25 mmSmt dummy cell, the printed circuit board in 3D

    Smt dummy cell

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    2 parts57CC-BY-4.0

Similar boards

  • 2 layers65 × 56 mmPi servo hat, the printed circuit board in 3D

    Pi servo hat

    earthtojake/text-to-cad

    Design physical products with AI

    23 parts26kMIT
  • 2 layers14 × 100 mmYunomi, the printed circuit board in 3D

    Yunomi

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    23 parts3kApache-2.0
  • 2 layers50.8 × 52.2 mmFuhhni, the printed circuit board in 3D

    Fuhhni

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    23 parts915
  • 2 layers138.8 × 89.8 mmKeyboard pcb, the printed circuit board in 3D

    Keyboard pcb

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    23 parts756GPL-3.0
  • 2 layers32.9 × 53.3 mmGoatgdo, the printed circuit board in 3D

    Goatgdo

    Kaldek/rat-ratgdo

    Open source schematics for ratgdo PCB

    23 parts511MIT
  • 2 layers35.5 × 50 mmTobo, the printed circuit board in 3D

    Tobo

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    23 parts463
  • 2 layers19 × 19 mmKeybit, the printed circuit board in 3D

    Keybit

    notaroomba/keybytes

    A truly modular keyboard

    23 parts444
  • 2 layers88.5 × 28 mmExpBreakout, the printed circuit board in 3D

    ExpBreakout

    Duet3D/Duet-2-Hardware

    The KiCAD source for the Duet 3d printer controller see www.duet3d.com

    23 parts258

Questions

How big is the Multiplexer PCB?

It measures 81.3 × 88.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Multiplexer use?

23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Multiplexer KiCad files?

From the iorodeo/potentiostat repository on GitHub, at the commit this page was made from: the board is hardware/pcbs/multiplexer_v0p1/multiplexer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Multiplexer design in my own project?

Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).