

USB C Environmental Monitor
USB-C powered environmental monitor PCB designed in KiCad.
- Size
- 58.7 × 61.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 47
- Pads
- 161
- Tracks, vias
- 227, 27
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Oct 2026
- Updated
- 16 Oct 2026
Overview
USB C Environmental Monitor is an open-source printed circuit board by iniyan26, from the iniyan26/USB-C-Environmental-Monitor repository on GitHub. It is a 4-layer board of 58.7 × 61.5 mm with 30 parts on 47 nets, routed with 227 tracks and 27 vias.
It is built around the ESP32-S3-WROOM-1-N8, AP2112K-3.3 and PTVS5V0Z1USKYL. Its parts include 9 capacitors, 8 resistors, 5 ICs, 3 switches and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
3ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedPTVS5V0Z1USKYL
06031.2nF 18V 200W 20A 25nA 5V 6.4V TVS 0603 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
README
README.mdUSB-C Environmental Monitor
A custom environmental monitoring PCB designed in KiCad, intended to measure temperature, humidity, and air quality using onboard sensors.
Features
- USB-C power input
- Environmental sensor interfaces
- Power regulation and decoupling
- Custom PCB layout
Tools
- KiCad
Repository Structure
schematic/— Circuit schematicpcb/— PCB layoutimages/— Design screenshots
Design Status PCB design and hardware testing status to be updated.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C5, C7, C8 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R4, R8 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C6, C9 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C4 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_TL3305A | SW2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | ER_OLEDM0.91_1x-I2C | Display:ER_OLEDM0.91_1x-I2C | U5 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | PTVS5V0Z1USK | Diode_SMD:Nexperia_DSN1608-2_1.6x0.8mm | D1 |
| 1 | Push button | Button_Switch_SMD:SW_SPST_TL3305A | SW3 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_TL3305A | SW1 |
| 1 | SHT4x | Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | ~ | Environmental_Monitor:Sensirion_DFN-6-1EP_2.44x2.44mm_P0.8mm | U4 |
Similar boards
- 4 layers124.9 × 103.9 mm

- 4 layers100 × 129.8 mm

- 4 layers52.7 × 42.5 mm

OmniProbe
emertcakir/OmniProbe
Open-source SWD, JTAG, UART, SPI, I2C and Logic Analyzer platform powered by RP2040
77 parts4MIT - 4 layers66.2 × 48 mm

NOVQCOREV1
Durgpratap07/NovaCore-V1
Professional open-source STM32G431 development platform featuring a 4-layer PCB, USB Type-C, modular interfaces, and production-inspired hardware design for embedded systems development.
49 parts1 - 2 layers50 × 40 mm

- 2 layers70.1 × 50.4 mm

ESP32 Weather Station
Maczla/ESP32_Weather_Station
ESP32-based IoT weather station PCB designed in KiCad
39 partsMIT - 8 layers24 × 27.3 mm

- 4 layers100 × 75 mm

OpenAirScope
emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
282 parts26MIT
Questions
How big is the USB C Environmental Monitor PCB?
It measures 58.7 × 61.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the USB C Environmental Monitor use?
30 parts, built around the ESP32-S3-WROOM-1-N8, AP2112K-3.3 and PTVS5V0Z1USKYL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB C Environmental Monitor KiCad files?
From the iniyan26/USB-C-Environmental-Monitor repository on GitHub, at the commit this page was made from: the board is pcb/USB_C_Environmental_Monitor.kicad_pcb and its schematic schematic/USB_C_Environmental_Monitor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB C Environmental Monitor design in my own project?
Its repository states no licence, so its author keeps all rights: ask iniyan26 before reusing the design.