Skip to the content
2 layers70.1 × 50.4 mmESP32 Weather Station, the printed circuit board in 3D

ESP32 Weather Station

Maczla/ESP32_Weather_Station

ESP32-based IoT weather station PCB designed in KiCad

Size
70.1 × 50.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
39
Nets
55
Pads
175
Tracks, vias
230, 31
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
29 Jul 2026
Updated
29 Jul 2026

Overview

ESP32 Weather Station is an open-source printed circuit board by Maczla, from the Maczla/ESP32_Weather_Station repository on GitHub, published under the MIT licence. It is a 2-layer board of 70.1 × 50.4 mm with 39 parts on 55 nets, routed with 230 tracks and 31 vias.

It is built around the ESP32-WROOM-32, BME280 and AP2112K-3.3, with the PTVS5V0Z1USKYL among its other parts. Its parts include 10 capacitors, 10 resistors, 4 connectors, 3 ICs and 3 diodes. It belongs with the home automation and IoT boards and the ESP32 boards of this library.

Main components

4

README

README.md

ESP32 Weather Station

ESP32 Weather Station is a compact IoT sensor board designed in KiCad. The board uses an ESP32-WROOM-32E module, BME280 environmental sensor and an I2C OLED display connector.

Features

  • USB-C 5 V power input
  • Input TVS protection
  • Resettable fuse
  • Ferrite bead EMI filtering
  • AP2112K-3.3 LDO regulator
  • ESP32-WROOM-32E Wi-Fi/Bluetooth module
  • BME280 temperature, humidity and pressure sensor
  • I2C OLED display connector
  • UART debug/programming header
  • Reset and boot buttons
  • GPIO expansion connector
  • Status LED

Design

The project was designed using a hierarchical schematic structure with separate blocks for power input, ESP32 module, BME280 sensor, OLED connector, UART debug interface and user I/O.

The PCB includes ground planes, mounting holes, ESP32 antenna keep-out and completed DRC cleanup.

Firmware

Firmware was prepared for the ESP32 Arduino environment. The code reads temperature, humidity and pressure from the BME280 sensor over I2C and displays the values on a 128x64 SSD1306 OLED display.

The firmware was compile-tested for ESP32 Dev Module in Arduino IDE.

Author

Maciej Zaczyk

Parts

39
QtyValueFootprintReferences
6100nFCapacitor_SMD:C_0805_2012MetricC1, C6, C8, C9, C10, C11
410kResistor_SMD:R_0805_2012MetricR6, R10, R11, R12
410uFCapacitor_SMD:C_0805_2012MetricC2, C3, C4, C5
24.7kResistor_SMD:R_0805_2012MetricR7, R8
25.1kResistor_SMD:R_0805_2012MetricR1, R2
2LEDLED_SMD:LED_0805_2012MetricD1, D3
11kResistor_SMD:R_0805_2012MetricR3
1330Resistor_SMD:R_0805_2012MetricR9
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U1
1BME280Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumberingU3
1BOOTButton_Switch_THT:SW_PUSH_6mmSW4
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ4
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U2
1FerriteBeadInductor_SMD:L_0805_2012MetricFB1
1OLED_I2CConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1PTVS5V0Z1USKDiode_SMD:Nexperia_DSN1608-2_1.6x0.8mmD2
1PolyfuseFuse:Fuse_0805_2012MetricF1
1RESETButton_Switch_THT:SW_PUSH_6mmSW5
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW3
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1

The 35 most common of 39 parts.

Similar boards

  • 4 layers52.7 × 42.5 mmOmniProbe, the printed circuit board in 3D

    OmniProbe

    emertcakir/OmniProbe

    Open-source SWD, JTAG, UART, SPI, I2C and Logic Analyzer platform powered by RP2040

    77 parts4MIT
  • 4 layers66.2 × 48 mmNOVQCOREV1, the printed circuit board in 3D

    NOVQCOREV1

    Durgpratap07/NovaCore-V1

    Professional open-source STM32G431 development platform featuring a 4-layer PCB, USB Type-C, modular interfaces, and production-inspired hardware design for embedded systems development.

    49 parts1
  • 2 layers50 × 40 mmSTM32, the printed circuit board in 3D

    STM32

    iniyan26/STM32-Development-Board

    Custom STM32 development board designed using KiCad.

    25 parts
  • 4 layers58.7 × 61.5 mmUSB C Environmental Monitor, the printed circuit board in 3D

    USB C Environmental Monitor

    iniyan26/USB-C-Environmental-Monitor

    USB-C powered environmental monitor PCB designed in KiCad.

    30 parts
  • 2 layers56 × 58 mmWeather station, the printed circuit board in 3D

    Weather station

    Dhruv2212-star/weather-station

    A Complete working model of a small but usefull weather station made at home with custom PCB and Casings to give it a unique look!

    22 parts
  • 2 layers66.3 × 33.9 mmESP32-Sensor Node, the printed circuit board in 3D

    ESP32-Sensor Node

    Moumne-mo/ESP32-Sensor-Node

    ESP32 mixed-signal sensor board (I2C + analog)

    27 partsMIT
  • 2 layers75 × 49 mmEsp32 node .kicad sch, the printed circuit board in 3D

    Esp32 node .kicad sch

    Salma-lotfy-Wazery/esp32-battery-powered-iot-node

    Custom 2-layer PCB designed in KiCad featuring ESP32, integrated LiPo charging (TP4056), USB-C power delivery, and sensor telemetry.

    50 parts

Questions

How big is the ESP32 Weather Station PCB?

It measures 70.1 × 50.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32 Weather Station use?

39 parts, built around the ESP32-WROOM-32, BME280, AP2112K-3.3 and PTVS5V0Z1USKYL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32 Weather Station KiCad files?

From the Maczla/ESP32_Weather_Station repository on GitHub, at the commit this page was made from: the board is KiCad/ESP32_Weather_Station.kicad_pcb and its schematic KiCad/01_Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32 Weather Station design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).