2 layers
2 layers158 × 34 mm
TaggerMainboard
Infinitag/Hardware6Files for the INFINITAG hardware
- Size
- 158 × 34 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 78
- Pads
- 399
- Tracks, vias
- 1,373, 143
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Nov 2016
- Updated
- 7 Jun 2019
Overview
TaggerMainboard is an open-source printed circuit board by Infinitag, from the Infinitag/Hardware repository on GitHub. It is a 2-layer board of 158 × 34 mm with 75 parts on 78 nets, routed with 1,373 tracks and 143 vias.
It is built around the ATMEGA16U2-MU, LMV358 and LM2596S-5.0, with the AMS1117-3.3, IRLML2502 and CD1206-S01575 among its other parts. Its parts include 17 capacitors, 11 resistors, 6 ICs, 5 diodes and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
9
ATMEGA16U2-MU
QFN-32-EP(5x5)-40℃~+85℃ 16KB 16MHz 2.7V~5.5V 22 512Byte 512Byte 8 Bit AVR Built-in FLASH QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LMV358
SOP-8-40℃~+125℃ 10pA 10pA 1MHz 2 2.5V~5.5V 20mA 20nV/√Hz@10kHz 2uV/℃ 40uA 5mV 600V/ms 65dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHSTECH PUBLICOperational Amplifier
LM2596S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRLML2502
SOT-23-40℃~+150℃ 1 N-channel 1.25W 20V 4.2A 50mΩ@2.5V 600mV 66pF 740pF 8nC@10V SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
CD1206-S01575
1206-55℃~+125℃ 150mA 1V@50mA 2.5uA@75V 400mW 4A 4ns 75V Standalone 1206 Switching Diodes ROHSBournsSwitching Diodes
CG0603MLC-05E
0603-55℃~+125℃ 0.2pF 1 10nA 30V 5V Bidirectional IEC 61000-4-2 0603 ESD and Surge Protection (TVS/ESD) ROHSBournsVaristors
CSTCE16M0V53-R0
SMD3213-3P-20℃~+80℃ 15pF 16MHz 40Ω SMD3213-3P Ceramic Resonators ROHSMurataCeramic ResonatorsFDN304P
SOT-23-55℃~+150℃ 1 P-Channel 1.312nF 1.5V 100mΩ@1.8V 106pF 2.4A 20V 20nC@4.5V 240pF 500mW P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
README
README.mdINFINITAG Hardware
All hardware files for the INFINITAG laser tag system
Credits
Website: http://www.infinitag.io
License
All files are published under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) License https://creativecommons.org/licenses/by-nc-sa/4.0/
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R6, R7, R9, R11 |
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C6, C17 |
| 4 | 220uF/16V | Capacitor_SMD:CP_Elec_6.3x5.8 | C5, C8, C10, C13 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C11, C16 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R1, R10 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C12, C14 |
| 2 | Array 10K | Resistor_SMD:R_Array_Convex_4x0603 | RN2, RN3 |
| 2 | CD1206-S01575 | Diode_SMD:D_1206_3216Metric | D5, D8 |
| 2 | CG0603MLC-05E | Diode_SMD:D_0603_1608Metric | D6, D7 |
| 2 | JSP_PH_Sensor | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | Sensor, Sensor |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 16MHz | Crystal:Crystal_SMD_HC49-SD | Y2 |
| 1 | 1K | Resistor_SMD:R_Array_Convex_4x0603 | RN5 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 22R | Resistor_SMD:R_Array_Convex_4x0603 | RN4 |
| 1 | 22pF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 330uH | Inductor_SMD:L_Wuerth_HCI-1350 | L1 |
| 1 | 50 Ohm | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | ATmega16U2-MU | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U6 |
| 1 | Array 470 | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | BLM21PG 221 | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | Bildmarke_6x6mm | Infinitag:Bildmarke_6x6mm | G*** |
| 1 | CSTCE16M0V53-R0 | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | Conn_02x03_Odd_Even | Infinitag:ICSP_Pogo | J19 |
| 1 | DFPlayer | Infinitag:DFPlayer | J3 |
| 1 | FDN304P | FDN304P:SSOT-3 | Q1 |
| 1 | ICSP | Infinitag:ICSP_Pogo | J6 |
| 1 | IRLML2502 | IRLML2502TRPBF:SOT23 | U2 |
| 1 | Infinitag_ESP_Shield_Lang | Infinitag:Infinitag_ESP_Shield_Lang | Extension Shield |
| 1 | JST_PH_Display | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | Display |
| 1 | JST_PH_Info | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | Info |
| 1 | JST_PH_IrLED | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | IR |
| 1 | JST_PH_Keypad | Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | Keypad |
| 1 | JST_PH_LEDbar_left | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | LED Left |
| 1 | JST_PH_LEDbar_right | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | LED Right |
| 1 | JST_PH_Reload | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | Reload |
| 1 | JST_PH_Speaker | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | Speaker |
| 1 | JST_PH_Special | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | Special |
| 1 | JST_PH_Trigger | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | Trigger |
| 1 | LED_RX_red | LED_SMD:LED_1206_3216Metric | RX |
| 1 | LED_TX_red | LED_SMD:LED_1206_3216Metric | TX |
| 1 | LED_green | LED_SMD:LED_1206_3216Metric | PWR |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U3 |
| 1 | LMV358 | LMV358AM8X:SOIC127P620X172-8N | U4 |
| 1 | MCU-ATMEGA2560-16AU(TQFP100) | MCU-ATMEGA2560-16AU_TQFP100_:TQFP100-0.5-14X14MM | U1 |
| 1 | Poly 500mA | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | S534 | Diode_SMD:D_SMA | D4 |
| 1 | SW_Reset | Button_Switch_SMD:SW_SPST_FSMSM | SW1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | USB_OTG | Infinitag:Micro USB Jack | J5 |
| 1 | VIN | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | VIN |
| 1 | WiFi Connector | Infinitag:Infinitag_ESP_Shield_Lang | Communication Shield |
Questions
How big is the TaggerMainboard PCB?
It measures 158 × 34 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TaggerMainboard use?
75 parts, built around the ATMEGA16U2-MU, LMV358, LM2596S-5.0 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TaggerMainboard KiCad files?
From the Infinitag/Hardware repository on GitHub, at the commit this page was made from: the board is PCB/TaggerMainboard_schmal/TaggerMainboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TaggerMainboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Infinitag before reusing the design.
More from Infinitag/Hardware
3- 2 layers38 × 59 mm
- 2 layers22 × 22 mm
Similar boards
- 2 layers97 × 75.5 mm
Arduino Uno R3
SuganyaBaskaran/kicad-projects
Portfolio, learning and practice attempts using KiCAD.
56 parts - 2 layers101.6 × 53.3 mm
- 2 layers101.6 × 53.3 mm
- 2 layers56.6 × 62.2 mm
ArduinoR3
Morethanmany2/Arduino-Uno
As a part of my day-to-day use, i tried to design the Arduino UNO dev board using all the datasheet materials and footprints required for precise design.
59 parts - 4 layers105.4 × 57.5 mm
- 2 layers101.6 × 53.3 mm
Arduino mega 2560 rev3e
javachaos/arduino_simulator
arduinosimulator is a standalone AVR simulation and board-tooling workspace.
72 partsGPL-3.0 - 2 layers101.6 × 53.3 mm
- 2 layers100 × 54 mm
