4 layers25.4 × 34.3 mm
Driver v3.1
brainsmoke/leddriver3d
Renamed from esp32leddriver because it also contains code and PCBs for other MCUs
31 parts11
2 layers34.5 × 50 mm
Sd2ps2
indrora/bakacard3SD2PS2: A stupid adapter for the PS2 MX4SIO project
- Size
- 34.5 × 50 mm
- Copper layers
- 2
- Thickness
- 1.19 mm
- Parts
- 15
- Nets
- 14
- Pads
- 61
- Tracks, vias
- 97, 60
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Feb 2022
- Updated
- 18 Feb 2022
Overview
Sd2ps2 is an open-source printed circuit board by indrora, from the indrora/bakacard repository on GitHub. It is a 2-layer board of 34.5 × 50 mm with 15 parts on 14 nets, routed with 97 tracks and 60 vias.
It is built around the DM3AT-SF-PEJM5, CAY16-1002F4LF and DTC114T, with the LTST-S270KGKT and LTST-S270KRKT among its other parts. Its parts include 2 diodes, 2 transistors, 2 connectors, 1 capacitor and 1 resistor.
Main components
5
DM3AT-SF-PEJM5
SMD-25℃~+85℃ 1.68mm Connector and Ejector MicroSD Card (TF Card) No Push-Push SMD SD Card / Memory Card Connector ROHSHirose ElectricSD Card / Memory Card Connector
CAY16-1002F4LF
120610kΩ 4 62.5mW 8 ±1% ±200ppm/℃ 1206 Resistor Networks, Arrays ROHSBournsResistor Networks & Arrays
DTC114T
--55℃~+150℃ 1 NPN 100mA 100nA 350mW 50V NPN - Bipolar (BJT)onsemiBipolar (BJT)
LTST-S270KGKT
SMD,1.6x1.2mm-30℃~+85℃ 130° 20mA 2V 571nm 574nm 71mcd 75mW Discrete Diode Side View Mount Water Clear Yellow Green SMD,1.6x1.2mm LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteLTST-S270KRKT
SMD,1.6x1.2mm-30℃~+85℃ 130° 20mA 2V 54mcd 631nm 639nm 75mW Discrete Diode Red Side View Mount Water Clear SMD,1.6x1.2mm LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | CAY16-1002F4LF | Resistor_SMD:R_Array_Convex_4x1206 | RN1, RN2 |
| 2 | DTC114T | sd2ps2:SOT-7_23Combo | Q1, Q2 |
| 2 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2 |
| 1 | sd2ps2:PlayStation_Memory_Card | J1 | |
| 1 | 47 | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 470nF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | DM3AT-SF-PEJM5 | SamacSys_Parts:DM3ATSFPEJM5 | J2 |
| 1 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID3 |
| 1 | LOGO | sd2ps2:cirno | G*** |
| 1 | LTST-S270KGKT | sd2ps2:LTSTS270KxKT | LED1 |
| 1 | LTST-S270KRKT | sd2ps2:LTSTS270KxKT | LED2 |
The 14 most common of 15 parts.
Questions
How big is the Sd2ps2 PCB?
It measures 34.5 × 50 mm and has 2 copper layers, 1.19 mm thick.
What parts does the Sd2ps2 use?
15 parts, built around the DM3AT-SF-PEJM5, CAY16-1002F4LF, DTC114T and LTST-S270KGKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sd2ps2 KiCad files?
From the indrora/bakacard repository on GitHub, at the commit this page was made from: the board is sd2ps2.kicad_pcb and its schematic sd2ps2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sd2ps2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask indrora before reusing the design.
Similar boards
- 2 layers114 × 102 mm
Rpi cm4-switch board
sequoia-hope/rpi-cm4-switch-board
A Raspberry Pi (RPi) Compute Module 4 (CM4) Carrier Board with integrated gigabit switch
94 parts45 - 12 layers232 × 250 mm
KlusterLab r2.0
PCB-Arts/fast-open-switch-hardware
KlusterLab is an open FPGA development platform designed for experimenting with high-speed interfaces and formally verified IP cores.
1,169 parts15 - 2 layers81.8 × 55.4 mm
Cm4-digipi carrier
hemna/cm4-digipi-carrier
Raspberry Pi CM4 Carrier board for Ham radio PTT Control
52 parts3 - 4 layers58.4 × 54 mm
- 4 layers262.9 × 64.4 mm
MorphoDock
SlimeVR/SlimeVR-Morphocharger
SlimeVR Official charger design for butterfly trackers
188 parts1Apache-2.0 - 4 layers90 × 90 mm
- 2 layers43.5 × 28.5 mm
