2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70
2 layers41.9 × 35.6 mm
Motor driver
inderpreet/PCB_L293DPCB for L293D Motor Driver Chip in KiCAD
- Size
- 41.9 × 35.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 15
- Pads
- 47
- Tracks, vias
- 76, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Jul 2016
- Updated
- 30 Jul 2016
Overview
Motor driver is an open-source printed circuit board by inderpreet, from the inderpreet/PCB_L293D repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 41.9 × 35.6 mm with 14 parts on 15 nets, routed with 76 tracks and 0 vias.
It is built around the L293D and PN2222A. Its parts include 4 resistors, 4 connectors, 2 transistors and 1 IC. It belongs with the robots and motor control boards of this library.
Main components
2README
README.mdL293D Motor Driver PCB
A simple two layered PCB for the L293D motor Driver in DIP package.
Dependencies
PCB was designed in KiCAD 4.x and CAM files are not included.
-----> http://embeddedcode.wordpress.com
Designed by Inderpreet Singh Of Guru Nanak Dev Univeristy, Amritsar
This software may be distributed and modified under the terms of the GNU General Public License version 2 (GPL2) as published by the Free Software Foundation and appearing in the file LICENSE.TXT included in the packaging of this file. Please note that GPL2 Section 2[b] requires that all works based on this software must also be made publicly available under the terms of the GPL2 ("Copyleft").
We put a lot of time and effort into our project and hence this copyright notice ensures that people contribute as well as each contribution is acknowledged. Please retain this original notice and if you make changes please document them below along with your details.
The latest copy of this project/library can be found at: https://github.com/inderpreet/
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | CONN_01X02 | Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | P2, P3, P4 |
| 2 | 10K | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R2, R4 |
| 2 | 1K | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R3 |
| 2 | PN2222A | TO_SOT_Packages_THT:TO-92_Molded_Narrow | Q1, Q2 |
| 1 | CONN_01X08 | Pin_Headers:Pin_Header_Straight_1x08 | P1 |
| 1 | L293D | Housings_DIP:DIP-16_W7.62mm | U1 |
The 11 most common of 14 parts.
Questions
How big is the Motor driver PCB?
It measures 41.9 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Motor driver use?
14 parts, built around the L293D and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motor driver KiCad files?
From the inderpreet/PCB_L293D repository on GitHub, at the commit this page was made from: the board is Kicad/motor driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motor driver design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers84.3 × 58.4 mm
EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers56.4 × 72.6 mm
Ras pi hat
geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…
8 parts13 - 2 layers87.5 × 70 mm
- 2 layers92.5 × 62.5 mm
DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 2 layers47.5 × 49.5 mm
- 2 layers120.7 × 184.1 mm
- 2 layers90 × 53.4 mm
