Skip to the content
2 layers120 × 100 mmSKYLF, the printed circuit board in 3D

Nuestro proyecto es continuar con el simulador de vuelo que empezo el grupo llamado "AVIS" en 2019, destinado a practicar maniobras y replicar las condiciones de vuelo reales dentro de una cabina que simula los…

Size
120 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
56
Pads
101
Tracks, vias
197, 0
Pours
5
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
9 Apr 2024
Updated
19 Dec 2024

Overview

SKYLF is an open-source printed circuit board by impatrq, from the impatrq/avis2024 repository on GitHub. It is a 2-layer board of 120 × 100 mm with 30 parts on 56 nets, routed with 197 tracks and 0 vias.

It is built around the X9C103SZ. Its parts include 8 resistors, 7 ICs and 4 crystals. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

¿De que se trata nuestro proyecto?

Nuestro proyecto es continuar con el simulador de vuelo que empezo el grupo llamado "AVIS" en 2019, destinado a practicar maniobras y replicar las condiciones de vuelo reales dentro de una cabina que simula los movimientos del avion. El propósito principal será facilitar la realización de prácticas didácticas, proporcionando a los usuarios un entorno seguro y controlado para mejorar sus habilidades de vuelo y familiarizarse con diferentes escenarios y situaciones aeronáuticas. Este tipo de simuladores se utilizan tanto con fines de entrenamiento de pilotos como para el entretenimiento de entusiastas de la aviación. Para mas informacion, entrar a las carpetas que estan en el repositorio.

Tecnologías utilizadas

Entorno Virtual

  • Flight Simulator 2020
  • SimVar Watcher

Software de programación

  • ArduinoUNO
  • Thonny
Drivers de ArduinoUNO
  • ESP32_DEVKIT
  • MPU6050_light

Componentes

  • Placa PCB con:
    • ESP32 (30 pines)
    • MPU6050
    • Potenciometro digital X9C103S
    • Dos optoacopladores 4N25
    • Dos resistencias de 330 ohms
    • Dos resistencias de 10 Kohms
  • Panel de Control:
    • Impresión 3D del Panel de Control
    • ArduinoUNO R3
    • Cable de Datos para el Arduino
    • 9 switches On/Off
    • 3 Pulsadores
    • Llave selectora de 6 estados

Software del Panel de Control:

  • Mobiflight
  • FSUIPC

Integrantes:

Somos un grupo de alumnos de 7°2da AV de la E.E.S.T. N°7 "Taller Regional Quilmes" (IMPA).

image

Lautaro Esteban

text
📷 Instagram: @lauty.esteban
📧 Email: lautyesteban14@gmail.com
🗞️ LinkedIn: Lautaro Sebastian Esteban
🌐 Github: https://github.com/estebanlautaro

Agustin Brizuela:

text
📷 Instagram: @agustiin.brizuela 
📧 Email: brizuu750@gmail.com 
🗞️ LinkedIn: Agustin Lionel Brizuela 
🌐 Github: https://github.com/brizuu750

Marco Jofiel Godoy Baldovino:

text
📷 Instagram: @jofiel_godoy  
📧 Email: markbaldj@gmail.com 
🗞️ LinkedIn: Marco Baldovino
🌐 Github: https://github.com/MarkingRNT

Santiago Rubio:

text
📷 Instagram: @santy_201205
📧 Email: santy201205@gmail.com
🗞️ LinkedIn: Santiago Rubio
🌐 Github: https://github.com/SantiagoRubio

Lucas David Meabrio:

text
📷 Instagram: @lucass_meab
📧 Email: meabriolucas@gmail.com
🗞️ LinkedIn: Lucas Meabrio
🌐 Github: https://github.com/LucasMeabrio

Leandro Flores:

text
📷 Instagram: @lean.floresss
📧 Email: leandro200flores@gmail.com
🗞️ LinkedIn: Leandro Flores
🌐 Github: https://github.com/lean1712flores

Santiago Leiva:

text
📷 Instagram: @leivva.s
📧 Email: santiagoleiva745@gmail.com 
🗞️ LinkedIn: Santiago Leiva
🌐 Github: https://github.com/SantyLeiva

Emiliano Romo Cordoba:

text
📧 Email: romoemiliano324@gmail.com
🗞️ LinkedIn: Emiliano Romo Cordoba 
🌐 Github: https://github.com/RomoCordoba

Parts

30
QtyValueFootprintReferences
410KResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR5, R6, R7, R8
4330Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1, R2, R3, R4
44N25Package_DIP:DIP-6_W7.62mmU4, U5, U6, U7
2X9C103Spotenciometro x9c103s:Potenciometro X9C103SU3, U8
1ESP32-DEVKIT-V1ESP32-DEVKIT-V1:MODULE_ESP32_DEVKIT_V1U1
1~pines:COM2COM2
1~pines:SCLSCL1
1~pines:VH2VH2
1~pines:VCC2VCC2
1~pines:X2 (2)X2(2)1
1~pines:SDASDA1
1~pines:VL1VL1
1~pines:VCC (mpu)VCC(mpu)1
1~pines:X1 (1)X1(1)1
1~pines:COM1COM1
1~pines:VCC1VCC1
1~pines:VL2VL2
1~pines:VH1VH1
1~pines:X2 (1)X2(1)1
1~pines:X1 (2)X1(2)1

Similar boards

  • 2 layers100 × 50 mmMonitor solar v2, the printed circuit board in 3D

    Monitor solar v2

    Laboratorio-Robotica-UTN-Fra/Monitor_solar

    Se utilizara una placa para tomar la tension y corriente de un panel, escalarla a valores entre 3v3 y 0v para poder utilizar un ADC para realizar la lectura de datos

    35 parts
  • 2 layers52.2 × 52.2 mmBase promicro, the printed circuit board in 3D

    Base promicro

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    30 parts3kApache-2.0
  • 2 layers40.6 × 15.2 mmVr mmm, the printed circuit board in 3D

    Vr mmm

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    30 parts1.2k
  • 2 layers270 × 11 mmDaylight, the printed circuit board in 3D

    Daylight

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    30 parts1.1kGPL-3.0
  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    30 parts1kGPL-3.0
  • 2 layers40.5 × 58 mmInitial v, the printed circuit board in 3D

    Initial v

    tenderlove/initial-v

    It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

    30 parts1kApache-2.0
  • 2 layers34.3 × 41.8 mmMotionCubeViewAllForces, the printed circuit board in 3D

    MotionCubeViewAllForces

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    30 parts915

Questions

How big is the SKYLF PCB?

It measures 120 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SKYLF use?

30 parts, built around the X9C103SZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SKYLF KiCad files?

From the impatrq/avis2024 repository on GitHub, at the commit this page was made from: the board is Kicad/SKYLF.kicad_pcb and its schematic Kicad/SKYLF.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SKYLF design in my own project?

Its repository states no licence, so its author keeps all rights: ask impatrq before reusing the design.